Frigidaire 216396900

Frigidaire 216396900 Adjustable Foot Leveling Leg

Model: 216396900

Product Overview

The Frigidaire 216396900 Adjustable Foot Leveling Leg is a genuine replacement part designed to ensure optimal performance and stability for your Frigidaire freezer. Engineered to exact specifications, this leveling leg helps maintain the proper balance of your appliance, which is crucial for efficient operation and longevity.

Frigidaire 216396900 Adjustable Foot Leveling Leg, a black threaded component with a wide base.

Image: The Frigidaire 216396900 Adjustable Foot Leveling Leg, showcasing its threaded shaft and sturdy base.

Technical Specifications

  • Part Number: 216396900
  • Material Type: Metal
  • Item Weight: 0.317 ounces
  • Product Dimensions: 1.5 x 2.5 x 3.5 inches (approx. 3.8 cm x 6.35 cm x 8.9 cm)
  • UPC: 782247811419, 012505474781
Diagram showing the dimensions of the Frigidaire 216396900 Adjustable Foot Leveling Leg, with length 2.05 inches, width 1.35 inches, and height/depth 1.2 inches.

Image: Detailed diagram illustrating the precise dimensions of the leveling leg for accurate fitment.

Compatible Models

This genuine Frigidaire 216396900 Adjustable Foot Leveling Leg is compatible with a wide range of Frigidaire freezer models. To ensure proper fit and function, it is essential to verify compatibility with your specific appliance model before purchasing or attempting installation.

Graphic titled 'Is Your Part Compatible?' showing a partial list of Frigidaire models compatible with the leveling leg, and advising to check the Frigidaire website for a complete overview.

Image: A visual guide indicating compatibility with various Frigidaire models. For a comprehensive list, please refer to your appliance's user manual or the official Frigidaire website.

Installation Guide

Before You Begin

Repair Skill Level: DIY Beginner. For optimal results, it is recommended that someone with basic DIY skills performs this installation.

Tools Required:

  • Adjustable wrench
  • Tongue-and-groove pliers
  • Gloves
  • Safety glasses
Graphic showing installation information: Skill Level DIY Beginner, Install Time 10 minutes, and Tools Required including adjustable wrench, tongue-and-groove pliers, gloves, and safety glasses.

Image: Overview of the required tools and estimated skill level for installing the leveling leg.

Step-by-Step Installation

Always disconnect power to the appliance before beginning any repair work. Ensure the appliance is stable and supported before removing any parts.

  1. Prepare the Appliance: Carefully tilt or lift the freezer to access the existing leveling leg. If necessary, have another person assist in stabilizing the appliance.
  2. Remove Old Leg: Using an adjustable wrench or tongue-and-groove pliers, unscrew the old or damaged leveling leg counter-clockwise until it is completely removed.
  3. Inspect Mounting Area: Check the threaded hole for any debris or damage. Clean if necessary.
  4. Install New Leg: Align the new Frigidaire 216396900 Adjustable Foot Leveling Leg with the threaded hole. Screw it in clockwise by hand until it is snug.
  5. Tighten and Adjust: Use the wrench or pliers to tighten the leg securely. Once all legs are installed, carefully lower the appliance. Adjust each leveling leg by turning it clockwise to raise that corner or counter-clockwise to lower it, until the appliance is level and stable on all four corners.
  6. Verify Stability: Gently push on the corners of the appliance to ensure it does not rock. Make further adjustments as needed.
Frigidaire freezer with its door open, showing shelves filled with frozen food, with the leveling leg in the foreground, illustrating its purpose in stabilizing the appliance.

Image: The leveling leg shown in context with a freezer, highlighting its role in maintaining appliance stability.

Care and Maintenance

The Frigidaire Adjustable Foot Leveling Leg is designed for durability and requires minimal maintenance. Periodically check the leveling legs to ensure they remain securely tightened and that the appliance is still level. Over time, vibrations or movement can cause legs to loosen, leading to instability. Re-adjust as necessary to maintain proper balance and prevent undue stress on the appliance's structure.

Troubleshooting

  • Leg does not thread properly: Ensure the new leg is correctly aligned with the threaded opening. Check for any debris or damage in the opening that might obstruct the threading. Do not force the leg; if it doesn't thread smoothly, re-examine the alignment and the opening.
  • Appliance remains wobbly after installation: Verify that all leveling legs are installed and adjusted correctly. Ensure the floor surface is even. Adjust each leg individually until the appliance is perfectly stable on all points.
  • Leg breaks or wears prematurely: While rare for genuine parts, ensure the appliance is not overloaded or subjected to excessive movement that could stress the legs. If a part fails prematurely, contact Frigidaire customer support.

Warranty and Customer Support

For information regarding the warranty of your Frigidaire 216396900 Adjustable Foot Leveling Leg, please refer to the documentation included with your original appliance or visit the official Frigidaire website. For further assistance, technical support, or to inquire about other genuine Frigidaire replacement parts, please contact Frigidaire customer service directly.

You can visit the official Frigidaire store for more products and support: Frigidaire Store