1. Introduction
The LEE Foundation Kit 100mm Filter Holder is a fundamental component of the LEE Filters 100mm System, designed for photographers and filmmakers. This holder allows for the use of up to three 100mm wide filters simultaneously, providing extensive creative control over light and exposure. It is engineered to attach securely to your camera lens via a separately purchased adapter ring.
2. Product Overview
The Foundation Kit Filter Holder is constructed to be robust and reliable, ensuring stable filter placement during use. Its design accommodates standard 100mm filters, offering versatility for various photographic needs. The holder features multiple slots for filters and includes components for easy assembly and adjustment.
Figure 2.1: Front view of the LEE Foundation Kit 100mm Filter Holder.
Figure 2.2: Angled view of the LEE Foundation Kit 100mm Filter Holder, showing its robust construction.
3. What's in the Box
Upon opening the package, verify that all the following items are present:
- LEE Foundation Kit Filter Holder
- Storage Pouch
- Screwdriver (for assembly/adjustment)
- Components for creating up to three filter slots
Note: Adapter rings are not included with the Foundation Kit and must be purchased separately to attach the holder to your lens.
4. Setup Instructions
Follow these steps to properly set up your LEE Foundation Kit 100mm Filter Holder:
- Attach Adapter Ring to Lens: Screw the appropriate LEE adapter ring (standard or wide-angle, purchased separately) onto the front filter thread of your camera lens. Ensure it is securely fastened but do not overtighten.
- Clip Filter Holder onto Adapter Ring: Align the LEE Foundation Kit Filter Holder with the adapter ring. The holder is designed to clip easily onto the adapter ring. Gently push the holder onto the ring until it clicks into place, ensuring a firm connection.
- Insert 100mm Filters: Slide your desired 100mm filters into the available slots on the filter holder. The holder can accommodate up to three filters. Ensure the filters are inserted smoothly and are seated correctly within the guides.
Figure 4.1: The LEE Foundation Kit 100mm Filter Holder, demonstrating its size and how it is held for attachment.
5. Operating Instructions
Once the filter holder is attached to your lens with an adapter ring, operating it is straightforward:
- Filter Insertion: Gently slide 100mm square or rectangular filters into the available slots. Ensure they are fully seated to prevent light leaks or accidental dislodgement.
- Filter Removal: To remove a filter, gently slide it out of its slot. Avoid forcing filters, especially if they feel stuck.
- Rotation: The entire filter holder assembly can be rotated on the adapter ring to adjust the position of graduated neutral density filters or other effects. Rotate carefully to achieve the desired alignment.
- Multiple Filters: The holder supports up to three filters. When using multiple filters, ensure they are clean to prevent image degradation.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your filter holder:
- Cleaning: Use a soft, lint-free cloth to wipe the holder clean. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive materials.
- Storage: When not in use, store the filter holder in its provided storage pouch to protect it from dust, scratches, and impacts. Keep it in a dry, cool environment.
- Inspection: Periodically inspect the holder for any signs of wear, damage, or loose screws. Use the included screwdriver to tighten any loose components if necessary.
7. Troubleshooting
If you encounter issues with your LEE Foundation Kit 100mm Filter Holder, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Holder does not attach to lens. | No adapter ring present or incorrect size. | Ensure an appropriate LEE adapter ring (sold separately) is screwed onto the lens. |
| Filters are difficult to insert/remove. | Filters are not 100mm, or slots are dirty/damaged. | Verify filters are 100mm. Clean filter slots. Inspect for damage. |
| Vignetting (dark corners) appears in images. | Using a standard adapter ring with a wide-angle lens, or multiple thick filters. | Consider using a LEE wide-angle adapter ring. Reduce the number of filters if possible. |
| Holder feels loose on the adapter ring. | Improper attachment or wear. | Re-attach the holder, ensuring it clicks securely. Inspect the clips for wear. |
8. Specifications
| Model Number | FHFK |
| Product Dimensions | 6.9 x 5.5 x 1.3 inches (17.5 x 14 x 3.3 cm) |
| Item Weight | 1 pound (0.45 kg) |
| Filter Compatibility | 100mm wide filters |
| Maximum Filters | 3 |
| Material | Glass (referring to filter material, holder is typically composite) |
| Manufacturer | Lee |
| UPC | 619465011447 |
9. Warranty Information
Specific warranty details for the LEE Foundation Kit 100mm Filter Holder are not provided in this manual. For information regarding product warranty, including terms, conditions, and duration, please refer to the official LEE Filters website or contact their customer support directly.
10. Support
Should you require further assistance, technical support, or have questions not covered in this manual, please visit the official LEE Filters website for comprehensive support resources, FAQs, and contact information.