1. Introduction
The Wolo 7950-A Lookout Plus GEN 3 is a high-performance, low-profile LED emergency warning light bar designed for optimal visibility and durability. This manual provides essential information for the safe and effective installation, operation, and maintenance of your light bar.
Featuring advanced GEN 3 LED technology, the Lookout Plus offers powerful front and rear work lights, along with rear-facing brake and traffic advisory lights, ensuring high visibility even in bright daylight conditions. Its robust construction includes a waterproof modular lens design made of strong polycarbonate plastic and an extruded aluminum frame.
2. Safety Information
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Always disconnect power before installation or maintenance.
- Ensure all wiring connections are secure and properly insulated to prevent short circuits.
- Mount the light bar securely to prevent detachment during vehicle operation.
- Do not look directly into the light bar when it is operating, as the intense light can cause eye damage.
- Operate the light bar only within the specified voltage range (typically 12V DC for vehicle applications).
- Consult local regulations regarding the use of emergency warning lights on public roads.
3. Package Contents
Verify that all components are present before beginning installation:
- Wolo 7950-A Lookout Plus GEN 3 Low Profile LED Emergency Warning Light Bar
- Switch Control Panel
- Double-sided Tape (for control panel mounting)
- Mounting Bracket (for control panel)
- Heavy-duty Adjustable Stainless Steel Universal Mounting Straps (2)
- Installation Manual (this document)
Figure 3.1: Wolo Lookout Plus light bar, control panel, and mounting hardware.
This image displays the complete Wolo Lookout Plus light bar assembly, including the main light bar unit, the compact control panel with various buttons, and two stainless steel mounting brackets designed for roof installation.
4. Setup and Installation
Proper installation is crucial for the performance and longevity of your light bar. It is recommended that installation be performed by a qualified professional.
4.1 Light Bar Mounting
- Identify a suitable mounting location on your vehicle's roof, ensuring clear visibility and secure attachment. The light bar is 52 inches long.
- Attach the heavy-duty adjustable stainless steel universal mounting straps to the light bar.
- Securely fasten the light bar to the vehicle's window ledge or other appropriate roof mounting points using the provided straps. Ensure the light bar is level and stable.
- Verify that the mounting does not interfere with vehicle doors, windows, or other moving parts.
4.2 Control Panel Installation
The control panel serves as the command center for the light bar.
- Choose a convenient location on your vehicle's dashboard or console that is easily accessible to the operator.
- The control panel can be mounted using the provided double-sided tape for a quick installation, or with screws using the mounting bracket for a more permanent fixture.
- Ensure the control panel cable can reach the light bar's wiring harness without strain or obstruction.
4.3 Electrical Connection
Connect the light bar to your vehicle's 12V DC power system. Refer to the detailed wiring diagram included with your product for specific connections. Typically, this involves connecting the positive wire to a fused 12V power source and the negative wire to a chassis ground.
- Ensure the power source is capable of handling the light bar's power consumption.
- Use appropriate gauge wiring and ensure all connections are waterproofed if exposed to the elements.
5. Operating Instructions
The Wolo 7950-A light bar offers multiple warning and traffic advisory patterns controlled via the switch panel.
5.1 Control Panel Overview
The control panel features an on/off switch, an LED power indicator, and micro push-button switches for pattern selection. It also includes a flash pattern indicator with eighteen (18) mini red LEDs and four (4) mini clear LEDs for work lights.
5.2 Powering On/Off
- To turn the light bar ON, press the ON/OFF switch on the control panel. The LED power indicator will illuminate.
- To turn the light bar OFF, press the ON/OFF switch again.
5.3 Selecting Flash Patterns
The light bar has fifteen (15) selectable warning light patterns and three (3) traffic advisory patterns.
- Use the designated push-button switches on the control panel to cycle through the available warning light patterns. Each press will advance to the next pattern.
- Use the separate push-button switches to select the desired traffic advisory pattern (e.g., left arrow, right arrow, center out).
Figure 5.1: Front view of the Wolo Lookout Plus light bar in operation.
This image shows the front of the Wolo Lookout Plus light bar with its clear lens, highlighting the arrangement of the GEN 3 TIR LED modules. Some modules are illuminated in amber and clear, demonstrating the light bar's operational appearance.
6. Maintenance
The Wolo 7950-A light bar is designed for long-term, low-maintenance operation. The 26 GEN 3 TIR modules, totaling 104 one-watt LEDs, are long-life and maintenance-free.
- Cleaning: Periodically clean the polycarbonate lens with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents that could damage the lens.
- Inspection: Regularly inspect the mounting straps and hardware for tightness and signs of wear or corrosion. Tighten any loose fasteners.
- Wiring: Check wiring connections periodically for any signs of fraying, corrosion, or loose terminals. Ensure all connections remain waterproof.
- Water Ingress: Although the light bar has a waterproof modular lens design, inspect for any signs of water ingress, especially after heavy rain or car washes. Address any seals that appear compromised.
7. Troubleshooting
If you experience issues with your Wolo 7950-A light bar, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light bar does not turn on. | No power, blown fuse, loose wiring connection, faulty switch. | Check vehicle's power supply and fuse. Inspect all wiring connections for tightness and corrosion. Test the ON/OFF switch. |
| Some LEDs or sections are not illuminating. | Damaged LED module, poor internal connection (e.g., solder joint). | This may indicate an internal component failure. Contact Wolo customer support for assistance. Do not attempt to repair internal components unless qualified. |
| Flash patterns do not change or are erratic. | Faulty control panel, wiring issue to control panel. | Ensure the control panel is securely connected. If the issue persists, the control panel may need replacement. |
| Water inside the light bar lens. | Compromised seal or lens. | Immediately disconnect power. Allow the unit to dry. Inspect seals and lens for cracks or damage. Contact Wolo support if damage is found. |
| Light bar randomly turns off or loses power. | Intermittent power connection, internal wiring issue. | Check main power connections and ground. If external connections are secure, an internal issue may be present. |
If the problem persists after attempting these solutions, please contact Wolo customer support for further assistance.
8. Specifications
| Feature | Description |
|---|---|
| Model | 7950-A |
| Brand | Wolo |
| Dimensions (L x W x H) | 51 x 14.5 x 6.5 inches |
| Weight | 30 Pounds |
| Color | Clear Lens, Amber LEDs |
| Form Factor | Bar |
| Auto Part Position | Front (Roof Mount) |
| Material | Aluminum (frame), Polycarbonate (PC) (lens) |
| Water Resistance Level | Waterproof |
| Remote Control Included? | No (Control Panel Included) |
| Number of Pieces | 1 (Light Bar Assembly) |
| LED Technology | GEN 3 TIR Modules (104 x 1-watt LEDs) |
| Warning Light Patterns | 15 selectable patterns |
| Traffic Advisory Patterns | 3 selectable patterns |
| UPC | 080217079501 |
9. Warranty and Support
For information regarding product warranty, please refer to the documentation provided with your purchase or visit the official Wolo website. Warranty terms and conditions may vary.
For technical support, replacement parts, or further assistance, please contact Wolo customer service directly. Ensure you have your product model number (7950-A) and purchase details available when contacting support.
Wolo Manufacturing Corp.
Website: www.wolo-mfg.com (Note: This is a placeholder URL, please refer to official Wolo documentation for actual contact information.)
