SUPERIOR Replacement Remote Control for DAIKIN FTX35JV1B

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

SUPERIOR Replacement Remote Control

User Manual for DAIKIN FTX35JV1B

Introduction

This manual provides comprehensive instructions for the SUPERIOR replacement remote control, designed specifically for use with DAIKIN FTX35JV1B air conditioning units. Please read this manual carefully before using the remote control to ensure proper operation and longevity of the device.

SUPERIOR Replacement Remote Control for DAIKIN FTX35JV1B

A silver-colored remote control for air conditioning units. It features a large LCD screen displaying temperature settings (26°C, 28°C), time (8:00, 18:08), and various mode indicators. Below the screen are buttons for power (orange), mode, fan speed, and temperature adjustment (up/down arrows). The brand 'SUPERIOR AirCo' is visible at the bottom.

Setup

The SUPERIOR replacement remote control is designed for easy setup. Typically, no complex programming is required for compatible DAIKIN FTX35JV1B units.

Battery Installation

  1. Locate the battery compartment cover on the back of the remote control.
  2. Slide the cover downwards or in the direction indicated by an arrow to open it.
  3. Insert two 1.5V AAA (LR03) batteries, ensuring the correct polarity (+ and -) as marked inside the compartment.
  4. Replace the battery compartment cover, sliding it back into place until it clicks securely.

Once batteries are installed, the remote control should be ready for immediate use with your DAIKIN FTX35JV1B air conditioning unit.

Operating Instructions

Familiarize yourself with the buttons and display on your remote control to effectively manage your air conditioning unit.

Key Functions

  • Power Button (ن): Press this orange button to turn the air conditioning unit ON or OFF.
  • Mode Button (MODE): Press to cycle through available operating modes: Cool, Heat, Fan, Dry, Auto. The current mode will be displayed on the LCD screen.
  • Temperature Adjustment Buttons (TEMP ▲/▼): Use the up (▲) and down (▼) arrows to increase or decrease the desired temperature setting. The set temperature will be shown on the LCD.
  • Fan Speed Button (FAN): Press to adjust the fan speed. Options typically include Auto, Low, Medium, High.
  • Timer Functions: The remote may support setting ON/OFF timers. Refer to the LCD display for timer indicators (e.g., 8:00 OFF, 18:08 ON) and consult the original DAIKIN unit manual for specific timer setting procedures if not intuitive.

Ensure a clear line of sight between the remote control and the air conditioning unit's receiver for optimal performance.

Maintenance

Proper maintenance ensures the longevity and reliable operation of your remote control.

Battery Replacement

Replace batteries when the remote's display becomes dim or its operating range decreases. Always replace both batteries simultaneously with new 1.5V AAA (LR03) batteries. Do not mix old and new batteries or different types of batteries.

Cleaning

Wipe the remote control with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the remote's surface or internal components.

Storage

If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the remote.

Troubleshooting

If you encounter issues with your remote control, try the following solutions:

  • Remote not responding: Check if the batteries are correctly inserted and have sufficient charge. Replace batteries if necessary.
  • Limited operating range: Ensure there are no obstructions between the remote control and the air conditioning unit. The maximum effective range is approximately 10 meters.
  • Unit not responding to commands: Verify that the air conditioning unit is powered on and its receiver is not blocked. Try pointing the remote directly at the unit.
  • Incorrect temperature or mode display: This is usually a remote display issue. If the unit responds correctly, the remote's display might be faulty, or batteries are low.

If problems persist after trying these steps, consider contacting customer support.

Specifications

BrandSUPERIOR
CompatibilityDAIKIN FTX35JV1B Air Conditioning Units
Battery Type2 x 1.5V AAA (LR03)
Connectivity TechnologyInfrared
Maximum Range10 Meters
Special FeatureUniversal (for specified models)

Warranty

This SUPERIOR replacement remote control comes with a 3-month warranty from the date of purchase. This warranty covers manufacturing defects. Please retain your proof of purchase for any warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.

Support

For further assistance or if you have questions not covered in this manual, please refer to the original documentation of your DAIKIN FTX35JV1B air conditioning unit or contact the seller/manufacturer of this SUPERIOR remote control. Contact information is typically available on the product packaging or the point of purchase.

© 2024 SUPERIOR. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.