1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Cisa 12V Electric Lock, model 11731601. This electric lock is designed for right-hand opening doors and features a button and day latch function. Please read this manual thoroughly before installation and use.
2. Safety Information
- Ensure all electrical connections are performed by a qualified electrician to prevent electric shock or damage to the unit.
- Disconnect power before performing any installation, maintenance, or troubleshooting.
- Use only the specified voltage (12V AC) for operation.
- Do not attempt to modify the lock's internal components. Unauthorized modifications may void the warranty and compromise security.
- Keep keys in a secure location and do not leave them unattended.
3. Package Contents
Verify that all components are present before beginning installation:
- Cisa Electric Lock with mounted cylinder
- Nozzle
- Bottom plate
- Protective roof
- Instruction sheet (detailed installation guide)
- Fixing screws
- 3 Keys
4. Specifications
| Brand | Cisa |
| Model Number | 11731601 |
| Voltage | 12 V AC |
| Current Consumption | 2.4 A |
| Dimensions (L x W x H) | 17.5 cm x 11.6 cm x 11 cm |
| Material | Galvanized Alloy Steel |
| Color | Silver (Galvanized) |
| Opening Direction | Right Hand |
| Backset | 50 mm |
| Security Certification | Grade 3 Security EN 14846 (Self-locking bolt) |
5. Setup and Installation
The Cisa 12V Electric Lock is designed for surface-mounted installation on right-hand opening doors, typically on gates or external doors. Refer to the detailed instruction sheet included in the package for precise drilling templates and step-by-step procedures.
5.1. Determine Opening Direction
This lock is specifically for right-hand opening doors. To determine if your door is right-hand opening, stand outside the door, facing it. If the hinges are on the right and the door opens inwards (or away from you if it's an outward-opening gate), it is a right-hand door.
Figure 1: Diagram showing the right-hand opening mechanism. The lock is installed on the inner side, and the entrance is from the outside.
5.2. Mounting the Lock
The lock is surface-mounted. Ensure the mounting surface is stable and secure. Use the provided fixing screws. The lock dimensions are crucial for proper alignment with the door frame.
Figure 2: Dimensions of the Cisa electric lock, approximately 17.5 cm in length and 11 cm in height.
5.3. Electrical Connection
Connect the lock to a 12V AC power supply. The lock consumes 2.4A. Ensure proper wiring to avoid short circuits or damage. The connection points are designed for pressure fitting of wires. Consult the included instruction sheet for the wiring diagram.
Figure 3: Technical details indicating 12V AC operation and 2.4A current consumption. The lock features a self-locking bolt and 50mm backset.
6. Operating Instructions
The Cisa electric lock offers multiple methods for opening, providing flexibility and security.
6.1. Opening with Key (External)
Insert one of the provided keys into the keyhole on the exterior side of the lock. Turn the key to retract the bolt and open the door. The key can also be used from the interior to activate or deactivate the internal button.
6.2. Opening with Electric Command (Internal Button)
From the interior side, press the red button located on the lock body. This will retract the bolt, allowing the door to open. This function can be integrated with an intercom system for remote opening.
Figure 4: The Cisa electric lock provides secure opening via both a physical key and an electric command button.
6.3. Day Latch Function
The day latch function allows the door to remain unlocked during periods of frequent entry and exit. Consult the detailed instruction sheet for specific steps on how to engage and disengage this feature.
7. Maintenance
Regular maintenance ensures the longevity and reliable operation of your Cisa electric lock.
- Cleaning: Wipe the exterior of the lock with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the galvanized finish.
- Lubrication: Periodically apply a small amount of graphite-based lubricant to the keyhole and moving parts of the bolt mechanism. Do not use oil-based lubricants as they can attract dirt.
- Inspection: Regularly check all mounting screws for tightness. Inspect electrical connections for any signs of wear or corrosion.
- Key Care: Do not force the key if it feels stiff. Ensure the key is fully inserted before turning.
8. Troubleshooting
If you encounter issues with your Cisa electric lock, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lock does not open electrically. | No power supply, loose wiring, faulty button. | Check power supply to the lock. Inspect all electrical connections for tightness. Test the button for functionality. Consult an electrician if necessary. |
| Key is difficult to turn or does not operate the lock. | Worn key, debris in keyhole, misaligned cylinder. | Try a spare key. Clean the keyhole with compressed air. Apply graphite lubricant. If the cylinder is misaligned, professional adjustment may be required. |
| Lock mechanism feels stiff. | Lack of lubrication, dirt accumulation. | Lubricate moving parts with graphite. Clean the lock mechanism. |
| Day latch function not working. | Incorrect engagement, internal mechanism issue. | Refer to the detailed instruction sheet for proper day latch operation. If the issue persists, contact support. |
For problems not listed here, or if solutions do not resolve the issue, please contact Cisa customer support.
9. Warranty and Support
Specific warranty details for the Cisa 12V Electric Lock model 11731601 are typically provided at the point of purchase or within the product packaging. Please retain your proof of purchase for warranty claims.
For technical support, spare parts, or warranty inquiries, please contact your local Cisa distributor or refer to the contact information provided on the official Cisa website (www.cisa.com).