NERF Rampage N-Strike Elite Toy Blaster

Introduction

This manual provides instructions for the assembly, operation, and maintenance of your NERF Rampage N-Strike Elite Toy Blaster. Please read all instructions carefully before use to ensure safe and optimal performance. This blaster is designed for manual operation and does not require batteries.

Safety Information

CAUTION: Do not aim at eyes or face. TO AVOID INJURY: Use only with official NERF darts. Other darts may not meet safety standards. Do not modify darts or dart blaster. Some assembly required. No tools needed.

What's in the Box

• Nerf N-Strike Elite Rampage Blaster
• Rampage Body
• Drum Connector
• 25-Dart Drum Magazine
• 25 Elite Darts
• Instructions Manual

Image: The NERF Rampage N-Strike Elite Blaster, 25-dart drum, and 25 Elite darts shown in frustration-free packaging.

Setup

1. Attach the Drum Connector: Locate the drum connector piece. Align it with the attachment point on the side of the blaster body and slide it into place until it clicks securely.
2. Load the Drum Magazine: Insert the 25 official Nerf Elite darts into the 25-dart drum magazine. Ensure darts are fully seated.
3. Attach the Drum Magazine: With the drum connector attached to the blaster, align the loaded 25-dart drum magazine with the connector. Push the magazine firmly into the connector until it locks into position.
4. Prepare the Blaster: Pull the slam-fire handle all the way back and then push it all the way forward to chamber the first dart.

Image: A user demonstrates holding the NERF Rampage blaster with the 25-dart drum magazine attached.

Operating Instructions

1. Single Shot Firing: To fire a single dart, pull the slam-fire handle all the way back and then push it all the way forward. Aim the blaster and pull the trigger to launch a dart.
2. Slam-Fire Action: For rapid-fire blasting, hold down the trigger and repeatedly slide the slam-fire handle back and forth. This will continuously launch darts as long as the trigger is held and the handle is cycled.
3. Range: The Nerf Rampage blaster is designed to send darts flying up to 90 feet (27 meters).

Image: A close-up view of the slam-fire grip being operated for rapid dart blasting.

Maintenance

• Dart Care: Use only official NERF Elite darts. Inspect darts regularly for damage. Damaged darts can affect performance and may cause jams.
• Cleaning: Wipe the blaster with a dry or slightly damp cloth to remove dust and debris. Do not immerse the blaster in water.
• Storage: Store the blaster and darts in a cool, dry place away from direct sunlight to prevent material degradation.

Troubleshooting

• Dart Jams: If a dart jams, do not force the handle or trigger. Open the jam access door (if available) or carefully remove the magazine and clear the obstruction manually. Ensure darts are not damaged or overloaded.
• Darts Not Firing: Check if the drum magazine is properly inserted and locked. Ensure the slam-fire handle is fully cycled back and forth before pulling the trigger. Verify darts are not damaged.

Specifications

Warranty and Support

For warranty information or product support, please refer to the manufacturer's official website or contact their customer service. Keep your proof of purchase for any warranty claims.

Manufacturer: Hasbro