TYLT VU Qi Wireless Charging Pad User Manual

Introduction

The TYLT VU Qi Wireless Charging Pad is designed to provide convenient and efficient wireless charging for Qi-compatible smartphones. Its unique 45-degree angled stand and three-coil charging system allow for flexible phone placement in both portrait and landscape orientations.

Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected devices.

• Do not expose the device to water or moisture.
• Do not disassemble or attempt to repair the device.
• Use only the power adapter provided with the TYLT VU.
• Keep the device away from extreme temperatures and direct sunlight.
• Avoid placing metal objects or cards with magnetic strips between the phone and the charging pad, as this may interfere with charging or damage the card.

Package Contents

Verify that all items are present in your package:

• TYLT VU Qi Wireless Charging Pad
• Power Adapter

Setup

1. Connect the provided power adapter cable to the power input port on the back of the TYLT VU Wireless Charging Pad.
2. Plug the power adapter into a standard wall outlet. The charging pad is now ready for use.

Image: The TYLT VU Wireless Charging Pad shown with its power adapter connected, ready to be plugged into an electrical outlet.

Operating Instructions

1. Ensure your smartphone is Qi-compatible. If your phone is not natively Qi-compatible, an additional Qi-enabled accessory may be required.
2. Place your Qi-compatible smartphone directly onto the TYLT VU charging pad. The three-coil system allows for flexible placement, so you can position your phone in either portrait or landscape orientation without needing precise alignment.
3. A charging indicator light on the pad will illuminate, and your phone should display a charging notification, confirming that charging has begun.
4. You can continue to use your phone, check notifications, or watch videos while it charges on the 45-degree angled stand.
5. Once your phone is fully charged, the pad will stop charging to prevent overcharging.

Image: A smartphone resting on the TYLT VU Wireless Charging Pad in portrait mode, actively charging.

Maintenance

• To clean the charging pad, disconnect it from the power source and wipe it with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surface of the device.
• Keep the charging surface free of dust and debris to ensure optimal performance.

Troubleshooting

• Phone not charging:
  Ensure the power adapter is securely connected to both the charging pad and a working wall outlet. Verify that your phone is Qi-compatible and properly placed on the charging surface. Remove any thick phone cases that might interfere with wireless charging.
• Slow charging:
  Confirm that your phone is centered on the charging pad as much as possible, even with the flexible coil system. Some phone cases can reduce charging efficiency. Ensure no foreign objects are between the phone and the pad.
• Phone getting warm during charging:
  It is normal for a phone to become slightly warm during wireless inductive charging. If the phone becomes excessively hot, remove it from the charger and allow it to cool. Ensure proper ventilation around the charging pad.
• Charging indicator light not on:
  Check the power connection. If the light still does not illuminate, try a different wall outlet.

Specifications

Warranty and Support

TYLT warrants this product to be free of defects in design, assembly, material, or workmanship for a period of one year from the date of purchase. TYLT will, at its option, repair or replace any defective product free of charge, excluding shipping costs.

For support or warranty claims, please visit the official TYLT website or contact their customer service department. Keep your proof of purchase for warranty validation.