Edifier M1370BT 2.1 Bluetooth Speaker User Manual

Introduction

Thank you for purchasing the Edifier M1370BT 2.1 Bluetooth Speaker system. This manual provides important information regarding the setup, operation, and maintenance of your speaker system. Please read it thoroughly before use to ensure optimal performance and safety.

The Edifier M1370BT is a versatile 2.1 multimedia speaker system designed for enhanced audio experience. It features both Bluetooth and auxiliary input options, allowing seamless connectivity with various devices such as smartphones, tablets, and televisions. The system includes a powerful subwoofer for deep bass and two satellite speakers for clear mid-range and treble frequencies.

Package Contents

Please ensure all items are present in the package:

• Subwoofer unit
• Satellite speakers (2 units)
• Audio input cable (3.5mm to 3.5mm)
• User Manual

Image: The complete Edifier M1370BT 2.1 speaker system, showing the central subwoofer unit and the two satellite speakers positioned on either side.

Product Overview

The Edifier M1370BT system consists of a subwoofer and two satellite speakers. Key features include:

• Bluetooth Connectivity: Easily pair with Bluetooth-enabled devices for wireless audio streaming.
• Auxiliary Input: Standard 3.5mm and stereo RCA line-in options for wired connections.
• Upward-Angled Satellites: Designed to project sound directly towards the listener for an optimized audio experience.
• Integrated Controls: Master volume and bass adjustment dials conveniently located on the subwoofer.
• Magnetically Shielded Subwoofer: Features a 5-inch (131mm) bass unit for rich, deep audio.

Image: A single satellite speaker from the Edifier M1370BT system, highlighting its unique upward-angled design and translucent stand.

Image: The rear panel of the Edifier M1370BT subwoofer, displaying the power switch, audio input ports (3.5mm and RCA), and volume/bass control knobs.

Setup Guide

1. Placement:

   Position the subwoofer on a flat, stable surface, preferably on the floor for optimal bass response. Place the satellite speakers on either side of your listening area, ensuring they are facing towards you. The translucent stands are designed to reduce interference from surfaces.

2. Connect Satellite Speakers:

   Connect the cables from the satellite speakers to the corresponding output ports on the rear panel of the subwoofer. Ensure a secure connection for both left and right channels.

3. Connect Audio Source:

   You have two primary options for connecting an audio source:

   • Bluetooth: Turn on the speaker system. The system will automatically enter Bluetooth pairing mode or you can switch to Bluetooth mode. On your device (smartphone, tablet, etc.), enable Bluetooth and select "Edifier M1370BT" from the list of available devices to pair.
   • Auxiliary (3.5mm or RCA): Use the provided 3.5mm audio cable to connect your audio source (e.g., computer, TV, MP3 player) to the 3.5mm line-in jack on the side of the subwoofer. Alternatively, use an RCA cable (not included) for stereo line-in.
4. Power Connection:

   Connect the power cable from the subwoofer to a standard AC power outlet (220 Volts). Turn on the power switch located on the rear panel of the subwoofer.

5. Initial Volume Adjustment:

   Before playing audio, set the master volume control on the subwoofer to a low level to avoid sudden loud sounds. Adjust the bass control to your preference.

Operating Instructions

Power On/Off

To power on the system, flip the power switch on the rear panel of the subwoofer to the 'ON' position. To power off, flip the switch to the 'OFF' position.

Volume Control

The master volume control dial is located on the side panel of the subwoofer. Rotate clockwise to increase volume and counter-clockwise to decrease volume.

Bass Adjustment

The bass adjustment dial is also located on the side panel of the subwoofer, next to the master volume control. Rotate this dial to increase or decrease the bass output to suit your listening preference.

Input Mode Selection

The system automatically prioritizes Bluetooth connection. If a Bluetooth device is paired and connected, the system will play audio from that source. If no Bluetooth device is connected or paired, the system will default to the auxiliary input. To switch between inputs, ensure the desired source is active and connected.

• Bluetooth Mode: Ensure Bluetooth is enabled on your device and paired with "Edifier M1370BT".
• Auxiliary Mode: Connect your audio source via the 3.5mm or RCA input. If a Bluetooth device is connected, disconnect it to switch to auxiliary input.

Maintenance and Care

• Cleaning:

  Wipe the speaker surfaces with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish. Avoid spraying liquids directly onto the speakers.

• Placement:

  Keep the speakers away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the subwoofer to prevent overheating.

• Handling:

  Handle the speakers with care. Avoid dropping or subjecting them to strong impacts, which can damage internal components.

• Power Off When Not In Use:

  For extended periods of non-use, it is recommended to power off the speaker system and unplug it from the power outlet.

Troubleshooting

If the problem persists after trying these solutions, please contact Edifier customer support.

Specifications

Warranty Information

The Edifier M1370BT 2.1 Bluetooth Speaker system comes with a 1-Year Limited Warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or external causes.

Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the warranty card included with your product or visit the official Edifier website.

Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Edifier customer support.

Edifier Official Website: www.edifier.com
(Please visit the website for regional contact information and support channels.)