1. Important Safety Information
Please read this manual carefully before installation and use. Retain this manual for future reference.
- Ensure all local plumbing and building codes are followed during installation.
- Turn off the main water supply before beginning any installation or maintenance.
- Use appropriate tools and wear safety glasses to prevent injury.
- If you are unsure about any part of the installation, consult a qualified plumber.
2. Package Contents
Verify that all components are present before starting installation:
- Franke Old England Kitchen Faucet (Model 115.0028.208)
- 40 mm Ceramic Cartridge (pre-installed)
- Connection Hoses (400 mm long)
- Mounting Hardware
3. Specifications
| Feature | Specification |
|---|---|
| Manufacturer | Franke |
| Model Number | 115.0028.208 |
| Product Dimensions | 29 x 22 x 3.5 cm |
| Item Weight | 2.38 kg |
| Color | Brown (Ramato/Copper Finish) |
| Finish | Copper |
| Material | Copper (Faucet Body), Ceramic (Handle Material) |
| Installation Method | Single-hole / Deck Mounting |
| Number of Handles | 1 |
| Spout Height | 290 mm (Total Height) / 209 mm (Height to Outlet) |
| Spout Type | Fixed, Swivel (up to 360 degrees) |
| Mounting Hole Diameter | 35 mm |
| Connection Hoses Length | 400 mm |
| Noise Class | I |
4. Setup and Installation
This section provides general guidelines for installing your Franke Old England kitchen faucet. Specific installation steps may vary based on your sink and countertop configuration.
- Prepare the Mounting Area: Ensure the mounting surface is clean and dry. The required mounting hole diameter is 35 mm.
- Install the Faucet: Insert the faucet base into the mounting hole. From underneath the sink, secure the faucet using the provided mounting hardware (washer and nut). Tighten securely but do not overtighten.
- Connect Water Supply: Attach the 400 mm long flexible connection hoses to your hot and cold water supply lines. Ensure all connections are hand-tightened, then use a wrench for a final quarter-turn. Do not overtighten.
- Check for Leaks: Slowly turn on the main water supply. Check all connections for leaks. If leaks are present, gently tighten the connections until they stop.
- Flush the System: Once installed, remove the aerator from the spout and turn on both hot and cold water for a few minutes to flush out any debris from the water lines. Reinstall the aerator.
5. Operating Instructions
The Franke Old England kitchen faucet features a single lever for controlling water flow and temperature, and a fixed spout that swivels.
- Water Flow: Lift the lever handle to increase water flow. Push it down to decrease or stop the flow.
- Water Temperature: Move the lever handle to the left for hot water and to the right for cold water. Adjust the position between left and right to achieve the desired temperature.
- Spout Rotation: The faucet spout can be rotated up to 360 degrees to direct water flow as needed within your sink area.
6. Maintenance
Regular cleaning and maintenance will help preserve the appearance and functionality of your faucet.
- Cleaning the Finish: Clean the copper finish regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Aerator Maintenance: If water flow becomes restricted, the aerator may be clogged. Unscrew the aerator from the end of the spout, clean any debris, and rinse thoroughly before reattaching.
- Cartridge Care: The 40 mm ceramic cartridge is designed for durability. If you experience persistent drips or leaks from the handle, the cartridge may need to be replaced. Consult a professional for cartridge replacement.
7. Troubleshooting
Refer to the following table for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator; partially closed shut-off valve; kinked supply line. | Clean aerator; ensure shut-off valves are fully open; check supply lines for kinks. |
| Faucet Leaks from Spout | Worn cartridge; debris in cartridge. | Replace or clean the ceramic cartridge. |
| Leaks from Base of Faucet | Loose mounting nut; improper seal. | Tighten mounting nut; ensure proper sealing during installation. |
| Difficulty Adjusting Temperature | Cartridge issue; unbalanced water pressure. | Inspect or replace cartridge; check water pressure to hot and cold lines. |
8. Warranty and Support
Franke products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Franke website.
For technical assistance, spare parts, or further inquiries, please contact Franke customer support through their official channels.
