Yatour YTM06-VM12-BT Bluetooth Car Adapter User Manual

Introduction

This manual provides instructions for the installation, operation, and maintenance of your Yatour YTM06-VM12-BT Bluetooth Car Adapter. This device integrates USB, SD card, AUX, and Bluetooth functionalities into your vehicle's audio system, enabling digital music playback and hands-free calling.

Safety Information

Please read all instructions carefully before use.

• Do not use or store the device near heat sources, moisture, or water.
• The device may cause interference with other wireless devices.
• Ensure proper installation to avoid distraction while driving.

Package Contents

Verify that all items are present in the package:

• 1x USB/SD/AUX Interface Module (Main Unit)
• 1x Bluetooth Module
• 1x Microphone
• 1x VW 12-pin Connection Cable
• 1x 3.5mm AUX Cable
• 1x User Manual

Setup and Installation

Installation typically involves connecting the adapter to the vehicle's radio system via the CD changer port. Professional installation is recommended.

General Installation Steps:

1. Power off the vehicle and remove the car radio from the dashboard.
2. Locate the CD changer port on the back of the car radio. This is usually a 12-pin connector for compatible VW, Skoda, Seat, and Audi models.
3. Connect the provided VW 12-pin connection cable from the Yatour interface module to the CD changer port on the radio.
4. Connect the Bluetooth module to the main interface unit.
5. Connect the microphone to the designated port on the interface unit and route it to a suitable location for hands-free calling (e.g., near the sun visor).
6. Secure the Yatour interface module in a safe, accessible location within the dashboard, away from heat and moisture.
7. Reinstall the car radio.
8. Power on the vehicle and select the CD changer or AUX source on your car radio to activate the Yatour adapter.

Image: The Yatour YTM06-VM12-BT main interface module, showing its compact size and various connection ports for USB, SD card, AUX, and the main vehicle harness. The included cables and microphone are also visible.

Operating Instructions

Mode Selection

Once installed, select the CD changer or AUX source on your car radio. The Yatour adapter will automatically detect the connected media (USB, SD, AUX, or Bluetooth).

USB/SD Card Playback

1. Insert a USB flash drive or SD/SDHC card (up to 32GB) containing MP3 or WMA files into the respective slot on the Yatour module.
2. The adapter will automatically begin playing music.
3. Use your car radio's controls (e.g., track forward/backward, folder navigation) to manage playback. The adapter emulates a CD changer, so folders on your USB/SD card will appear as virtual CDs.

Bluetooth Audio Streaming

1. Ensure your mobile device's Bluetooth is enabled.
2. On your mobile device, search for available Bluetooth devices and select "Yatour" or a similar identifier.
3. Once paired, audio from your mobile device will stream wirelessly to your car's speakers.
4. Use your mobile device to control music playback (play/pause, skip tracks).

Hands-Free Calling

1. After successful Bluetooth pairing, the hands-free function is automatically configured.
2. When a call comes in, the music will pause, and the call audio will be routed through your car's speakers.
3. Use the microphone for clear communication.
4. Answer/end calls using your mobile device or, if supported by your car radio, its call controls.

AUX Input

1. Connect an external audio device (e.g., MP3 player, smartphone) to the 3.5mm AUX input on the Yatour module using the provided AUX cable.
2. Select the AUX source on your car radio.
3. Play audio from your external device. Note that playback cannot be controlled via the car radio when using the AUX input.

Compatibility

The Yatour YTM06-VM12-BT adapter is compatible with specific VW, Skoda, Seat, and Audi vehicle models and radio systems. Please verify your vehicle and radio model against the list below.

Compatible VW Models (2002-2011):

• Beetle (2009-2011)
• EOS (2007-2011)
• Fox (2004-2011)
• Golf/GTI/R32 (2004-2011)
• Jetta (2003-2011)
• Passat (2004-2011)
• Polo (2005-2011)
• Rabbit (2007-2011)
• T5 (2003-2011)
• Tiguan (2007-2011)
• Touareg (2002-2011)
• Touran (2003-2011)

Compatible VW Radios:

• Delta 6 (on T5 & Touareg)
• Delta 7
• Premium 6/7
• R100/110
• CD100/200/210/300/310/500/510
• Navi 7L6, Z6Z7, New Phaeton
• RNS2, MFD2, RNS300/310/510 (without MDI)

Compatible Skoda Models (2007-2011):

• SuperB (2008-2011)
• Octavia (2007-2011)

Compatible Skoda Radios:

• Audience, Beat, Blues, Cruise, Dance
• Melody CC, Melody CD, MFD2, Nexus DVD
• Rhapsody, RCD300/500, RNS 2
• Stream, Symphony MP3, Swing, Altea CD01

Compatible Audi Models (2006-2010):

• A3 (2008-2010)
• A4/S4 (2007-2009)
• TT (2007-2010)
• R8 (2006-2009, not with touch screen)

Compatible Audi Radios:

• Concert 3, Chorus 3, Symphony 3
• Navigation Plus 3, Delta 6, Delta 7
• Navi BNS 5.0 (without MMI)
• Navi RNS-E (without MMI)

Compatible Seat Models (2005-2010):

• Altea (2005-2010)
• Leon (2006-2010)
• Toledo (2006-2010)

Compatible Seat Radios:

• Altea CD02, Audiosystem CD3, Aura CD
• Columbus, Lena, Radio CD1/CD2/CD3
• MFD2, PN1 (Monochrome), PN3 (Multicolor)
• RNS2, RNS4, Audio System 2, SE250/350

Troubleshooting

No Audio Output

• Ensure the car radio is set to the correct source (CD changer or AUX).
• Check all cable connections between the Yatour module and the car radio.
• Verify that the USB drive or SD card contains compatible MP3/WMA files and is formatted correctly (FAT32).
• For Bluetooth, ensure the device is properly paired and connected.

Bluetooth Connection Issues

• Make sure the Yatour module is powered on and in Bluetooth mode.
• Delete the Yatour device from your phone's Bluetooth settings and re-pair.
• Ensure no other devices are actively connected to the Yatour module.

USB/SD Card Not Recognized

• Check the file system (should be FAT32).
• Ensure the storage device is not larger than 32GB.
• Try a different USB drive or SD card.
• Ensure files are in the root directory or organized into folders that the car radio can recognize as virtual CDs.

Interference with Other Wireless Devices

• This is a known characteristic of some wireless devices. Try repositioning the Yatour module or other wireless devices if possible.

Specifications

Maintenance

The Yatour YTM06-VM12-BT adapter requires minimal maintenance.

• Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the device to extreme temperatures or direct sunlight.
• Ensure all connections remain secure.

Warranty and Support

Information regarding warranty and customer support for the Yatour YTM06-VM12-BT adapter is not available in this manual. Please refer to the product packaging or contact your retailer or Yatour's official website for warranty details and technical assistance.