Moen Arris Roman Tub Faucet Trim Kit User Manual

1. Product Overview

The Moen Arris 2-Handle Deck Mount Modern Roman Tub Faucet Trim Kit, model TS93003BN, offers a contemporary design with sharp angles and tubular lines, characteristic of the Arris collection. This trim kit is designed to provide a sophisticated and functional addition to your bathroom, featuring a brushed nickel finish for a warm, modern aesthetic. Please note that a compatible Moen M-PACT valve (models 4792, 4793, 4794, 4796, 4797, or 4798) is required for complete installation and operation.

Figure 1: Moen Arris Roman Tub Faucet Trim Kit (TS93003BN) in Brushed Nickel.

2. Key Features

• Brushed Nickel Finish: Provides a lightly brushed, warm-grey metallic look that is both inviting and modern.
• Two-Handle Lever Design: Allows for easy and precise adjustment of water temperature and flow.
• M-PACT Common Valve System: Built on Moen's M-PACT common valve system, enabling future style updates without replacing existing plumbing.
• Coordinating Arris Collection: Designed to seamlessly coordinate with other faucets and accessories within the Moen Arris Collection for a cohesive bathroom design.
• ADA Compliant: Meets Americans with Disabilities Act (ADA) specifications, ensuring accessibility.

3. Setup and Installation

Installation of the Moen Arris Roman Tub Faucet Trim Kit requires a compatible Moen M-PACT valve. Ensure you have the correct valve (Moen 4792, 4793, 4794, 4796, 4797, or 4798) installed according to its specific instructions before proceeding with the trim kit installation. This trim kit is designed for deck-mount installation on a tub with four holes.

Pre-Installation Checklist:

• Verify all components are present as per the packing list.
• Ensure the Moen M-PACT valve is correctly installed and secured.
• Turn off the main water supply to the bathroom.
• Clear the installation area of any debris.

Installation Steps (Summary):

1. Attach the spout assembly to the deck-mount holes, ensuring proper alignment and sealing.
2. Connect the hot and cold water lines from the valve to the corresponding inlets on the faucet body.
3. Install the two lever handles onto their respective valve stems, securing them firmly.
4. Test for leaks by slowly turning on the water supply and inspecting all connections.
5. Confirm proper water flow and temperature control from both handles.

Figure 2: The Moen Arris Roman Tub Faucet Trim Kit complements a modern bathroom aesthetic.

4. Operating Instructions

The Moen Arris Roman Tub Faucet features a two-handle design for precise control over water temperature and flow. The left handle typically controls hot water, and the right handle controls cold water. The spout directs the mixed water into the tub.

To Operate:

• Turning On: Rotate either the hot or cold handle counter-clockwise to begin water flow.
• Adjusting Temperature: Adjust both handles simultaneously to achieve the desired water temperature. Turning the hot handle further will increase hot water, and vice-versa for the cold handle.
• Adjusting Flow: The further the handles are turned, the greater the water flow.
• Turning Off: Rotate both handles clockwise until the water flow stops completely.

5. Maintenance and Care

Proper care and maintenance will ensure the longevity and aesthetic appeal of your Moen Arris Roman Tub Faucet. The brushed nickel finish is durable but requires gentle cleaning to prevent damage.

Cleaning Recommendations:

• Use a soft, damp cloth and mild soap (e.g., dish soap) for routine cleaning.
• Rinse thoroughly with clean water after cleaning to remove any soap residue.
• Dry the faucet with a soft cloth to prevent water spots and maintain the finish.
• Avoid: Abrasive cleaners, harsh chemicals, ammonia-based products, scouring pads, or steel wool, as these can damage the finish and void the warranty.

General Maintenance:

• Periodically check for any signs of leaks around the base of the faucet or connections. Address any leaks promptly.
• If water flow becomes restricted, check the aerator at the end of the spout for mineral buildup and clean as necessary.

6. Troubleshooting

This section provides solutions to common issues you might encounter with your Moen Arris Roman Tub Faucet Trim Kit.

If the problem persists after attempting these solutions, please contact Moen Customer Support or a qualified plumber.

7. Specifications

8. Warranty and Support

Warranty: The Moen TS93003BN Arris Roman Tub Faucet Trim Kit is backed by Moen's Limited Lifetime Warranty. This warranty covers defects in material and manufacturing workmanship for as long as the original consumer purchaser owns their home. For full details and terms of the warranty, please refer to the official Moen warranty documentation or visit the Moen website.

Customer Support: For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Moen Customer Support:

• Website: www.moen.com
• Phone: Refer to the Moen website for regional contact numbers.

Please have your product model number (TS93003BN) and proof of purchase ready when contacting support.