Ozeri ZB18-W

Ozeri Precision Digital Body Weight Scale (Model ZB18-W) Instruction Manual

Your guide to accurate and easy weight measurement.

Introduction

This manual provides instructions for the proper use and maintenance of your Ozeri Precision Digital Body Weight Scale, Model ZB18-W. This scale is designed to provide accurate body weight measurements with ease of use, featuring StepOn Activation and a Tare function for versatile weighing needs.

Safety Information

  • Always use the scale on a hard, flat, and stable surface. Using it on carpet or uneven surfaces may result in inaccurate readings.
  • Do not use the scale with wet feet, as this may cause slipping and injury.
  • Avoid storing the scale in humid environments or near chemicals, as vapors can affect internal mechanics.
  • Do not store the scale on its side; always keep it flat.
  • The scale is made of tempered glass. Handle with care to prevent breakage.
  • Keep batteries out of reach of children.

Package Contents

Please check the package for the following items:

  • Ozeri Precision Digital Body Weight Scale (Model ZB18-W)
  • 2 x AAA Batteries
  • Instruction Manual (this document)

Setup

  1. Battery Installation:

    Locate the battery compartment on the underside of the scale. Open the compartment cover and insert the 2 AAA batteries, ensuring correct polarity (+/-). Close the cover securely.

  2. Initial Calibration:

    Place the scale on a hard, flat, and stable surface. Step onto the scale briefly until a reading appears, then step off. The scale will display "0.0" or a similar indication, signifying it has calibrated. For the most accurate first reading after moving the scale, disregard the very first measurement and take a second measurement.

Ozeri Precision Digital Body Weight Scale, top view showing the display and Ozeri logo.

Image: Top view of the Ozeri Precision Digital Body Weight Scale, displaying "0.0 kg" on its LCD screen and the Ozeri logo.

Operating Instructions

  1. Standard Weighing:

    Once the scale is calibrated and on a stable surface, simply step onto the center of the scale. The StepOn Activation feature will automatically turn on the scale and display your weight. Remain still until the reading stabilizes.

  2. Changing Units (lbs/kg/st):

    On the underside of the scale, locate the unit button. Press this button to cycle through the available units of measurement: pounds (lbs), kilograms (kg), and British stones (st). Select your preferred unit before weighing.

  3. Tare Function (for weighing infants, pets, or luggage):

    The Tare button allows you to weigh an item while holding it. First, step onto the scale alone and note your weight. Step off. Then, press the Tare button. The display will reset to zero. Now, step back onto the scale while holding the item (e.g., infant, pet, luggage). The displayed weight will be the weight of the item only.

  4. Automatic Shut-off:

    To conserve battery life, the scale will automatically turn off after approximately 10 seconds of inactivity.

Maintenance

  • Clean the scale with a soft, damp cloth. Do not use abrasive cleaners or immerse the scale in water.
  • If the scale will not be used for an extended period, it is recommended to remove the batteries to prevent leakage.
  • Store the scale in a dry, flat location at room temperature.

Troubleshooting

ProblemPossible CauseSolution
Inaccurate readingsScale on uneven or soft surface (e.g., carpet); initial calibration not performed correctly.Ensure the scale is on a hard, flat surface. Perform initial calibration by stepping on and off the scale once before taking a measurement.
Display shows "Lo"Low battery.Replace the 2 AAA batteries.
Display shows "Err"Overload or measurement error.Ensure the weight does not exceed 440 lbs (200 kg). Step off the scale and try again. If the issue persists, contact customer support.
Scale does not turn onBatteries incorrectly installed or depleted.Check battery polarity. Replace batteries if necessary.

Specifications

  • Model: ZB18-W
  • Weight Capacity: 440 lbs (200 kg)
  • Measurement Increments: 0.2 lbs (0.1 kg)
  • Units: Pounds (lbs), Kilograms (kg), British Stones (st)
  • Display: LCD
  • Power Source: 2 x AAA Batteries (included)
  • Material: Impact-resistant tempered glass
  • Dimensions: Approximately 12 x 12 x 0.75 inches
  • Special Features: StepOn Activation, Tare Function, Auto-calibration, Auto Shut-off
Diagram showing the dimensions of the Ozeri Precision Digital Body Weight Scale: 12 inches by 12 inches by 0.75 inches.

Image: Dimensional diagram of the Ozeri Precision Digital Body Weight Scale, indicating its 12" x 12" x 0.75" size.

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Ozeri website. Keep your purchase receipt as proof of purchase.

© 2023 Ozeri. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.