Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your EGLO USA 92358A Petto Pendant Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The EGLO Petto Pendant features a simple, transitional design with a black bowl-like metal shade, providing directional light suitable for various indoor spaces. This fixture is designed for dry locations only.
Important Safety Information
- Always turn off the main power supply at the circuit breaker before installing, servicing, or cleaning the fixture.
- Consult a qualified electrician if you are unsure about the installation process.
- All wiring connections must be in accordance with local and national electrical codes.
- Do not exceed the recommended wattage for the light bulb.
- This fixture is rated for dry locations only. Do not install in damp or wet environments.
- Handle glass components with care to prevent breakage.
Package Contents
Verify that all components are present before discarding packaging materials.
- Pendant Light Fixture (Model 92358A)
- Mounting Hardware Kit
- Instruction Manual
Note: Light bulb is not included and must be purchased separately.
Installation Instructions
Tools Required (not included): Screwdriver, Wire Strippers, Pliers, Electrical Tape, Safety Glasses, Ladder.
Step 1: Prepare for Installation
- Turn off power at the main circuit breaker or fuse box to avoid electrical shock.
- Carefully unpack the fixture and its components. Lay out all parts on a clean, flat surface.
Step 2: Adjust Cord Length (Optional)
The pendant features a field-cuttable cord, allowing you to adjust the hanging height. Determine the desired length before proceeding.
- Loosen the set screw on the canopy or cord grip.
- Gently pull the cord through the canopy to the desired length.
- Trim any excess cord, ensuring enough length remains for electrical connections.
- Secure the cord by tightening the set screw.
Image: Dimensions of the EGLO USA 92358A Petto Pendant Light. The diagram illustrates the fixture's 6-inch diameter and adjustable cord length up to 59 inches.
Step 3: Mount the Fixture
- Attach the mounting bracket to the junction box in the ceiling using the provided screws. Ensure the bracket is securely fastened.
- Connect the fixture's ground wire (usually bare copper or green) to the ground wire from the junction box.
- Connect the fixture's neutral wire (usually white) to the neutral wire from the junction box.
- Connect the fixture's hot wire (usually black) to the hot wire from the junction box.
- Secure all wire connections with wire nuts and wrap with electrical tape for added safety.
- Carefully tuck all wires into the junction box.
- Align the fixture canopy with the mounting bracket and secure it with the provided screws or nuts.
Image: Close-up of the EGLO USA 92358A Petto Pendant Light. This view highlights the black finish and the design of the shade.
Step 4: Install the Light Bulb
- Insert the appropriate light bulb (not included) into the socket. This fixture is LED compatible.
- Ensure the bulb wattage does not exceed the maximum rating specified on the fixture or in the specifications section.
Operating Instructions
- Once installation is complete and all connections are secure, restore power at the circuit breaker.
- Operate the pendant light using a standard wall switch.
- Important: This fixture is non-dimmable. Do not connect to a dimmer switch, as this may damage the fixture or bulb.
Image: EGLO USA 92358A Petto Pendant Lights in a living space. This shows multiple units installed, providing ambient lighting.
Care and Maintenance
- Cleaning: Always turn off the power and allow the fixture to cool before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Bulb Replacement: Ensure power is off and the bulb has cooled. Unscrew the old bulb and replace it with a new one of the correct type and wattage.
- Regularly check all electrical connections for tightness and signs of wear.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
If problems persist, consult a qualified electrician or contact customer support.
Product Specifications
| Model Number | 92358A |
| Brand | EGLO |
| Color/Finish | Black Finish |
| Material | Metal |
| Style | Transitional / Contemporary |
| Light Fixture Form | Pendant |
| Product Dimensions | 6.00 inches (Diameter), 59 inches (Max Height) |
| Item Weight | 1.43 pounds |
| Indoor/Outdoor Usage | Indoor (Dry Located) |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Wattage | 35 watts (Max) |
| Number of Light Sources | 1 |
| Dimmable | No |
| LED Compatible | Yes |
| Cord | Field Cuttable |
Warranty Information
This EGLO USA 92358A Petto Pendant Light is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
The warranty does not cover damage caused by improper installation, misuse, abuse, accidents, or unauthorized repairs. Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, missing parts, or warranty inquiries, please contact EGLO USA customer service. Refer to the EGLO USA website or product packaging for current contact information.
When contacting support, please have your model number (92358A) and proof of purchase readily available.