Redi-Remote RT251157

Redi-Remote Replacement Remote Control User Manual

For GE Models GE5803P, 251157 (Model RT251157)

Introduction

This manual provides comprehensive instructions for the Redi-Remote replacement remote control, designed for seamless compatibility with GE models GE5803P and 251157. This remote is a custom-built replacement and is not an original GE product. It is pre-programmed to control all functions of the specified GE units without requiring any additional setup.

Product Overview

Redi-Remote Replacement Remote Control

Image: The Redi-Remote replacement remote control, showing its button layout and compact design.

The Redi-Remote replacement control is engineered for simplicity and direct functionality. Key features include:

  • No Programming Required: The remote is pre-programmed for immediate use with compatible GE units.
  • Dedicated Functionality: This remote is designed to perform every function for the specific unit it controls and cannot be programmed to operate auxiliary devices.
  • Compact Design: The remote measures approximately 7.5 inches in length, 2.25 inches in width, and 0.75 inches in thickness.
  • Standard Operation: It operates using infrared technology and does not include laser pointers or LED lights.

Setup

Battery Installation

The remote control requires four (4) AAA batteries for operation. These batteries are included with your purchase.

  1. Locate the battery compartment cover on the back of the remote control.
  2. Slide the cover downwards or press the latch (if present) to open the compartment.
  3. Insert four AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Replace the battery compartment cover by sliding it back into place until it clicks securely.

Initial Use

No programming is required. Once batteries are installed, the remote is ready for immediate use with your compatible GE unit (GE5803P, 251157).

Operating Instructions

This remote control functions identically to the original remote for your GE unit. Point the remote directly at the GE unit's infrared receiver for optimal performance.

Accessing Lower Buttons

The remote features a sliding cover over its lower half. To access additional buttons, gently slide this cover downwards. Once you are finished, you may slide it back up to protect the buttons.

Maintenance

Battery Replacement

Replace batteries when the remote's response becomes sluggish or stops working. Always replace all four batteries at the same time with new AAA batteries. Do not mix old and new batteries, or different types of batteries.

Cleaning

To clean the remote control, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the remote's surface or internal components.

Troubleshooting

  • Remote not responding: Ensure batteries are inserted correctly with the correct polarity. Replace old batteries with new ones. Make sure there are no obstructions between the remote and the GE unit's infrared receiver.
  • Specific buttons not working: Check if the sliding cover is fully open to reveal all buttons. Ensure the remote is pointed directly at the GE unit.
  • Interference: Strong light sources or other infrared devices can sometimes interfere with the remote's signal. Try operating the remote in a different environment if issues persist.

If you encounter any concerns with the remote after purchase that cannot be resolved with these steps, please contact the seller directly for assistance.

Specifications

FeatureDetail
BrandRedi-Remote
Model NumberRT251157
Compatible GE ModelsGE5803P, 251157
Product Dimensions7 x 2.5 x 1 inches
Item Weight4.5 ounces
Batteries Required4 AAA batteries (included)
Connectivity TechnologyInfrared
Special FeatureNo Programming Required
Max Number of Supported Devices1

Warranty and Support

This Redi-Remote replacement control is designed for reliable operation. For any issues or concerns regarding the functionality of your remote control, please contact the original seller directly. They will be able to provide specific support and guidance related to your purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.