SWISSINNO 1 280 001

SWISSINNO Mouse Trap No See No Touch Instruction Manual

Model: 1 280 001

1. Product Overview

The SWISSINNO No See No Touch Mouse Trap is designed for effective and hygienic mouse control. This trap features a pre-baited, refillable design and a precision strike mechanism to ensure efficient capture. The enclosed design allows for disposal of captured rodents without direct sight or touch, promoting hygiene.

SWISSINNO No See No Touch Mouse Trap with Blue Angel certification

Image: The SWISSINNO No See No Touch Mouse Trap, certified for efficient and humane function.

2. Safety Information

3. Package Contents

4. Setup Instructions

  1. Remove Bait Cover: Locate the bait compartment at the end of the trap. Slide the red bait cover off to expose the pre-baited lure.
    Step 1: Remove bait cover from the mouse trap

    Image: Step-by-step guide showing removal of the bait cover.

  2. Set the Trap: Press the red lever down firmly until it locks into place. This action sets the trap mechanism.
    Step 2: Press the red lever down to set the mouse trap

    Image: Hand pressing the red lever to set the trap.

  3. Placement: Position the trap in areas where mouse activity is observed. Mice rarely move across open spaces, so place the trap with the open side facing a wall or in a corner.

Setup Video Guide:

Video: Official SWISSINNO guide on setting up the No See No Touch Mouse Trap. This video demonstrates the process of preparing and placing the trap for optimal effectiveness.

5. Operating Instructions

  1. Checking the Trap: Regularly check the trap. The red lever will be in the "up" position if a mouse has been caught.
  2. Disposal: To dispose of a captured mouse, hold the trap over a waste bin. Press the red lever down again to release the mouse directly into the bin without needing to see or touch it.
    Disposing of a captured mouse without touching

    Image: Illustration of the no-touch disposal method, highlighting the hygienic aspect of the trap.

  3. Resetting: After disposal, the trap can be reset by pressing the red lever down until it locks, making it ready for reuse.

6. Maintenance

7. Troubleshooting

ProblemPossible CauseSolution
Trap snaps immediately when placed down.Trap may be overly sensitive or improperly set.Ensure the lever is fully locked into the set position. Place the trap gently on a stable, flat surface. If sensitivity persists, try placing it on a soft cloth or mat.
No mice caught.Incorrect placement, old bait, or mice are avoiding the trap.
  • Relocate the trap to areas of high mouse activity (e.g., along walls, behind appliances).
  • Ensure the open end faces a wall.
  • Refresh the bait with SWISSINNO replacement bait or a small amount of peanut butter.
  • Ensure no human scent is on the trap by handling it with gloves.
Trap is sprung but no mouse is caught.Mouse may have triggered the trap but escaped, or the trap was accidentally triggered.
  • Ensure the trap is placed on a stable surface where it won't be easily disturbed.
  • Verify the bait is securely in place and not easily removed without triggering the mechanism.
  • Consider using a different bait type if mice are consistently taking the bait without being caught.

8. Specifications

FeatureDetail
BrandSWISSINNO
Model Number1 280 001
StyleMosuetrap No See No Touch
MaterialPlastic
Product Dimensions2"L x 5"W x 2"H (approx. 5 cm L x 12.7 cm W x 5 cm H)
Item Weight4.5 Ounces (approx. 127.5 grams)
Number of Pieces1
Target SpeciesMouse
Bait TypePre-baited (peanut butter based)
Dimensions of SWISSINNO No See No Touch Mouse Trap

Image: Detailed dimensions of the SWISSINNO No See No Touch Mouse Trap.

9. Warranty and Support

For warranty information and customer support, please refer to the official SWISSINNO website or contact their customer service directly. The product is designed for reliable performance and repeated use.

EU Spare Part Availability Duration: 1 Year.

Manufacturer: SWISSINNO SOLUTIONS

For further assistance, visit the SWISSINNO Store on Amazon.