Directed Electronics Inc 3100LX
Contents
Avital 3100LX Security System User Manual
Model: 3100LX | Brand: Directed Electronics Inc
Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Avital 3100LX 3-Channel Keyless Entry Car Alarm system. Please read this manual thoroughly before attempting any installation or operation to ensure proper function and safety.
Safety Information
- Professional installation is highly recommended for this product due to the complexity of vehicle electrical systems.
- Always disconnect the vehicle's battery before beginning any installation work to prevent electrical shorts or damage.
- Do not attempt to modify the system's components or wiring. Unauthorized modifications can void the warranty and pose safety risks.
- Keep remote controls away from water, extreme temperatures, and direct sunlight to prevent damage.
- Ensure all wiring connections are secure and properly insulated to prevent short circuits.
Package Contents
Please verify that all components are present in your Avital 3100LX package:

Contents of the Avital 3100LX security system package, including the main control unit, wiring harnesses, and remote controls.
- Avital 3100LX Control Module
- (2) 3-Button Transmitters (Remote Controls)
- Main Wiring Harnesses
- Status Indicator LED
- Built-in Shock Sensor (integrated into control module)
- User Manual (this document)
- Note: A siren is not included with this specific model and must be purchased separately if desired.
Setup and Installation
Installation of the Avital 3100LX system requires a thorough understanding of automotive electrical systems. For optimal performance and safety, professional installation by a qualified technician is strongly recommended.
Pre-Installation Checklist
- Ensure the vehicle's battery is disconnected before starting any wiring.
- Obtain your vehicle's specific wiring diagrams to identify correct wires for ignition, constant 12V, ground, door triggers, trunk trigger, parking lights, and door locks.
- Gather necessary tools: multimeter/test light, wire strippers, crimpers, soldering iron (recommended), electrical tape, and zip ties.
Basic Wiring Overview
The Avital 3100LX control module connects to various points in your vehicle's electrical system. Refer to the detailed wiring diagram provided in the comprehensive installation guide (often available as a PDF from the manufacturer's website) for precise connections.
- Power Connections: Connect the main power wire to a constant 12V source and the ground wire to a solid chassis ground point.
- Ignition Input: Connect to a wire that receives 12V only when the ignition is on.
- Door Trigger Inputs: Connect to your vehicle's door pin switches. The system supports both positive and negative door triggers.
- Parking Light Output: Connect to the vehicle's parking light circuit for visual confirmation of system status.
- Door Lock/Unlock Outputs: Connect to your vehicle's power door lock system. Depending on your vehicle, external relays may be required for proper operation.
- Status LED: Mount the small red LED in a visible location on your dashboard or windshield pillar. This LED indicates the system's armed/disarmed status and provides diagnostic flashes.
Shock Sensor Adjustment
The Avital 3100LX features a built-in shock sensor that detects impacts to your vehicle. Its sensitivity can be adjusted to prevent false alarms while still providing adequate protection.
- Locate the adjustment dial on the side of the control module.
- Turn the dial clockwise to increase sensitivity (more easily triggered).
- Turn the dial counter-clockwise to decrease sensitivity (less easily triggered).
- Test the sensitivity by gently bumping various parts of the vehicle (e.g., tire, bumper) to ensure it triggers appropriately without being overly sensitive.
Operating Instructions
Your Avital 3100LX system is designed for simple and intuitive operation using the included remote controls.

Avital 3100LX Security System with two 3-button remote controls and product packaging.
Remote Control Functions
The system comes with two 3-button transmitters, each with distinct functions:
| Button | Function |
|---|---|
| Lock (Top Left) | Arms the security system and locks the vehicle doors. |
| Unlock (Top Right) | Disarms the security system and unlocks the vehicle doors. |
| Star (*) (Bottom Center) | Activates Panic Mode (press and hold for 3 seconds). |
Arming the System
- Ensure all vehicle doors, hood, and trunk are closed.
- Press the Lock button on your remote control.
- The vehicle's parking lights will flash once, and the system will emit one chirp (if a siren is connected) to confirm arming.
- The Status LED will begin to flash slowly, indicating the system is armed.
Disarming the System
- Press the Unlock button on your remote control.
- The vehicle's parking lights will flash twice, and the system will emit two chirps (if a siren is connected) to confirm disarming.
- The Status LED will turn off.
Panic Mode
- To activate Panic Mode, press and hold the Star (*) button on the remote for approximately 3 seconds.
- The system will immediately trigger the alarm, causing the vehicle's lights to flash and the siren (if connected) to sound continuously.
- To turn off Panic Mode, press any button on the remote control.
Maintenance
The Avital 3100LX system requires minimal maintenance. The primary maintenance task involves replacing the batteries in your remote controls.
Remote Battery Replacement
When the operating range of your remote control decreases significantly, or the LED indicator on the remote dims, it is likely time to replace the battery.
- Carefully open the remote casing, typically by prying it apart with a small flat-head screwdriver or coin at the seam.
- Note the type of battery used (e.g., CR2032 lithium coin cell).
- Remove the old battery and insert a new one, ensuring correct polarity (+/-).
- Snap the remote casing back together securely.
System Care
- Keep the main control module dry and free from excessive vibrations.
- Avoid exposing the remote controls to water, extreme temperatures, or direct sunlight for prolonged periods.
Troubleshooting
If you encounter issues with your Avital 3100LX system, refer to the table below for common problems and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| System does not respond to remote. | Dead remote battery. | Replace the remote battery. |
| System does not respond to remote. | Remote out of range. | Move closer to the vehicle and try again. |
| System does not respond to remote. | System fuse blown. | Check the main power fuse for the alarm system and replace if necessary. |
| Alarm triggers randomly (false alarms). | Shock sensor too sensitive. | Adjust the shock sensor sensitivity dial counter-clockwise to decrease sensitivity. |
| Alarm triggers randomly (false alarms). | Faulty door/hood/trunk pin switch. | Inspect all vehicle pin switches for proper operation and repair/replace any faulty ones. |
| Doors do not lock/unlock. | Wiring issue to door locks or incorrect relay setup. | Verify all wiring connections to the vehicle's door lock system and ensure any required relays are correctly installed. |
Specifications
Key technical specifications for the Avital 3100LX Security System:
| Feature | Detail |
|---|---|
| Model Number | 3100LX |
| System Type | 3-Channel Security/Keyless Entry System |
| Remote Controls | (2) 3-Button Transmitters |
| Product Dimensions | 7.1 x 5 x 2.4 inches |
| Item Weight | 13.6 ounces |
| Power Source | 12V DC (Vehicle Battery) |
| Remote Batteries | 2 Lithium Metal batteries required (included) |
| Status Indicator | Bright Red LED |
| Shock Sensor | Built-in, adjustable |
| Dome Light Supervision | Yes (requires separate relay) |
| First Available Date | March 21, 2013 |
Warranty and Support
This Avital product is covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, including duration and coverage details, please refer to the warranty card included with your product or visit the manufacturer's official website.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Directed Electronics Inc. customer service through their official channels.
Online Resources:
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.