Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Hubbardton Forge Moreau 6 Light Linear Pendant. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Important Safety Information
- Always turn off the main power supply at the circuit breaker before installing, servicing, or cleaning the fixture.
- Consult a qualified electrician if you are not familiar with electrical wiring.
- Ensure all electrical connections comply with local codes and ordinances.
- Do not exceed the maximum wattage specified for the bulbs.
- Handle glass components with care to prevent breakage.
- This fixture is designed for indoor use only.
Package Contents
Verify that all components are present before beginning installation:
- Moreau 6 Light Linear Pendant Fixture
- (6) Type G-9 60W max bulbs
- Mounting hardware (e.g., canopy, mounting plate, screws)
- Installation instructions (this manual)
Setup and Installation
Professional installation is recommended for this lighting fixture. Ensure power is disconnected at the circuit breaker before proceeding.
- Prepare for Installation: Turn off power at the main circuit breaker. Clear the work area.
- Mounting Bracket Installation: Secure the mounting bracket to the junction box in the ceiling using the provided screws.
- Adjusting Height: The pendant features a telescoping height adjustable down rod and clutch system. Adjust the length of the down rods to your desired height before wiring.
- Electrical Connections: Connect the fixture's wires to the corresponding house wires (black to black, white to white, ground to ground) using wire nuts. Ensure all connections are secure.
- Canopy Installation: Carefully push the fixture's canopy up to the ceiling, covering the junction box and mounting bracket. Secure it with the provided screws or nuts.
- Glass Shade Attachment: Attach the sand glass shades to the fixture. Handle with care.
- Bulb Installation: Insert the (6) Type G-9 60W max halogen bulbs into their respective sockets.
- Restore Power: Once installation is complete and all components are secure, restore power at the circuit breaker.
Image: The Moreau 6 Light Linear Pendant with sand glass shades, showcasing its design and adjustable down rods.
Operating Instructions
Once installed and powered, the Hubbardton Forge Moreau Pendant operates like any standard light fixture. Use a compatible wall switch to turn the light on and off.
- Ensure the correct G-9 60W max bulbs are installed.
- Avoid touching halogen bulbs directly with bare hands, as oils can reduce bulb life. Use a cloth or glove.
Maintenance
Regular maintenance ensures the longevity and appearance of your fixture.
- Cleaning: Turn off power before cleaning. Wipe the metal components with a soft, dry cloth. For glass shades, use a mild glass cleaner applied to a cloth, then wipe the shades. Do not spray cleaner directly onto the fixture.
- Bulb Replacement: Turn off power at the circuit breaker. Allow bulbs to cool completely. Carefully remove the old G-9 bulb and insert a new one, ensuring it is G-9 60W max or less.
- Inspection: Periodically check for any loose connections or damaged components. If damage is found, discontinue use and contact a qualified electrician or Hubbardton Forge support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture; loose wiring; faulty bulb; faulty wall switch. | Check circuit breaker. Ensure all wiring connections are secure. Replace bulb. Test wall switch. |
| Light flickers. | Loose bulb; loose wiring connection; incompatible dimmer switch (if applicable). | Tighten bulb. Check wiring connections. Ensure dimmer switch is compatible with halogen bulbs. |
| Bulbs burn out quickly. | Incorrect bulb wattage; power surge; touching bulbs with bare hands during installation. | Ensure bulbs are G-9 60W max. Consider a surge protector. Use gloves when handling new bulbs. |
Specifications
| Model Number | 136555-08-S396 |
| Brand | Hubbardton Forge |
| Material | Alloy Steel, Glass |
| Light Source Type | Halogen, Incandescent |
| Number of Light Sources | 6 |
| Max Wattage per Bulb | 60W (G-9 type) |
| Included Components | Pendant fixture, 6 G-9 bulbs |
| Item Weight | 26.2 pounds |
| Product Dimensions | 49.6 x 24 x 4.6 inches |
| Special Feature | Adjustable height |
Image: Example of material finishes, representative of the alloy steel used in the fixture.
Warranty Information
This Hubbardton Forge fixture comes with a Lifetime Limited Warranty when installed in a residential setting. For full details regarding warranty coverage and terms, please refer to the official Hubbardton Forge website or contact their customer support.
Customer Support
For technical assistance, replacement parts, or warranty claims, please contact Hubbardton Forge customer support:
- Website: www.hubbardtonforge.com (Please refer to the official website for current contact information)
- Phone: Refer to the official website for current phone numbers.
