Introduction
Thank you for choosing the Moen Align Chrome One-Handle Modern Kitchen Pulldown Faucet, Model 7565. This faucet is designed to provide reliable performance and enhance your kitchen experience. Please read this manual thoroughly before installation and operation to ensure proper function and longevity of your product.
Figure 1: The Moen Align Chrome One-Handle Modern Kitchen Pulldown Faucet, Model 7565.
For a complete installation guide, please refer to the official PDF document: Moen Align Faucet Installation Manual (PDF).
Setup and Installation
Proper installation is crucial for the optimal performance of your Moen Align faucet. It is recommended to consult the detailed installation manual provided by Moen for step-by-step instructions and safety precautions.
- Mounting: This faucet is designed for 1-hole installation. An optional escutcheon (Moen SKU 141002) is available separately for 3-hole installations.
- Quick Connect System: The Duralock quick connect system facilitates easier and faster installation, often requiring fewer tools.
- Included Components: Ensure all components are present before beginning installation, including flexible supply lines with 3/8" compression fittings, the kitchen faucet, and the instruction manual.
Figure 2: Illustration of the Duralock Quick Connect system, designed for simplified faucet installation.
Figure 3: Diagram showing the components included with the Moen Align pulldown faucet, such as the faucet wand, deck gasket, pulldown hose, and hardware pack.
Operating Instructions
The Moen Align faucet features intuitive controls and advanced spray technology for efficient kitchen tasks.
- Handle Operation: The single lever handle controls both water flow and temperature. Move the handle up to increase flow and down to decrease. Move it left for hot water and right for cold water. The handle has a 100-degree arc of travel for temperature adjustment.
- Pulldown Sprayer: The integrated pulldown wand features a 68-inch braided hose, offering extended reach and flexibility.
- Reflex Docking System: The spray head is equipped with the Reflex system, ensuring smooth operation and secure docking back into the spout after use.
- Power Clean Spray Technology: This feature delivers 50% more spray power compared to faucets without this technology, aiding in more efficient cleaning.
- Spray Modes: Easily switch between an aerated stream for everyday cleaning and a powerful rinse for heavy-duty tasks.
- Spout Rotation: The spout rotates 360 degrees, allowing for flexible positioning and installation of the handle on either side.
Figure 4: Close-up view of the pulldown spray wand demonstrating the Reflex docking and Power Clean spray technology for enhanced cleaning efficiency.
Figure 5: The Moen Align faucet in operation, illustrating the water flow from the pulldown sprayer into a kitchen sink.
Care and Maintenance
To maintain the appearance and performance of your Moen Align faucet, follow these care guidelines:
- Cleaning: Clean the chrome finish regularly with a soft, damp cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Aerator Maintenance: Periodically remove and clean the aerator to remove mineral deposits and maintain optimal water flow.
- General Inspection: Regularly check for any leaks or drips. Address these promptly to prevent further issues.
Troubleshooting
Should you encounter any issues with your Moen Align faucet, please refer to the comprehensive troubleshooting section in the full installation manual. Common issues and their solutions are typically detailed there. For further assistance, contact Moen customer support.
Product Specifications
| Brand | Moen |
| Model Name | 7565 |
| Color | Chrome |
| Finish Type | Chrome |
| Material | Metal |
| Number of Handles | 1 |
| Mounting Type | Deck Mount |
| Hole Count | 1 |
| Maximum Flow Rate | 1.5 Gallons Per Minute |
| Spout Height | 3.5 Inches |
| Spout Reach | 7.87 Inches |
| Hose Length | 68 Inches |
| Special Feature | Pull Down Sprayer |
| Certification | WaterSense, Certified Frustration-Free |
| Product Dimensions | 24.75 x 12.25 x 3.5 inches |
| Item Weight | 5.5 pounds |
Figure 6: Technical diagram illustrating the key dimensions of the Moen Align faucet, including spout reach and overall height.
Warranty Information
Moen products are manufactured under the highest standards of quality and workmanship. The Moen Align Faucet (Model 7565) is backed by a Limited Lifetime Warranty against leaks, drips, and finish defects to the original consumer purchaser. For full warranty details and terms, please refer to the official Moen warranty documentation or contact Moen customer service.
Customer Support
For technical assistance, replacement parts, or any questions regarding your Moen Align faucet, please visit the official Moen website or contact their customer service department. You can find contact information on the Moen website or in the original product packaging.
Visit the Moen Store on Amazon for more products and information.
