Fantech ECO-Touch Programmable Touch Screen Wall Control

Introduction

The Fantech ECO-Touch Programmable Touch Screen Wall Control is designed to provide intuitive and efficient management of your home's ventilation system. This advanced control unit features a touch screen interface, allowing for easy adjustment of settings and monitoring of indoor conditions. Its unique ECO Mode optimizes operation for energy efficiency, while various manual modes offer tailored control over ventilation and fan speed. The ECO-Touch is compatible with Fantech's SHR/VHR (HRV), SER (ERV), and FLEX Series units.

This manual provides essential information for the proper installation, operation, and maintenance of your ECO-Touch control.

Safety Information

Please read all instructions carefully before installation and operation. Improper installation or use can lead to electrical shock, injury, or damage to the product. Always disconnect power before performing any wiring or maintenance.

• Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.
• Ensure the power supply to the ventilation unit is disconnected before connecting the ECO-Touch control.
• Do not expose the control to water or excessive humidity.
• Do not attempt to repair or modify the unit yourself. Refer all servicing to qualified personnel.

Setup and Installation

The ECO-Touch control is designed for simplified installation, utilizing a proprietary two-wire communication protocol that is not polarity sensitive. It can be mounted to a standard electrical box or directly to the wall.

Mounting

1. Choose a suitable location for the control, typically in a central living area.
2. Ensure the power to the ventilation unit is OFF at the circuit breaker.
3. Mount the control unit either directly to the wall or to a standard electrical box using appropriate screws.

Wiring

1. Connect the two communication wires from your Fantech ventilation unit to the designated terminals on the ECO-Touch control. The two-wire protocol is not polarity sensitive, simplifying connections.
2. Ensure all connections are secure.
3. Once wiring is complete, restore power to the ventilation unit. The ECO-Touch display should power on. If the display does not power up, check the connections; sometimes, reversing the connector orientation can resolve this.

Figure 1: Front view of the Fantech ECO-Touch control. The display shows sections for 'AUTO', 'MANUAL', and 'OPTIONS', along with a house icon indicating ventilation status. The Fantech logo is visible at the bottom.

Operating Instructions

The ECO-Touch offers both automatic and manual operation modes to suit various user preferences.

Display Overview

• LCD Backlit Touch Screen: 2 x 3 inch (5.08 cm x 7.62 cm) display for clear visibility and interaction.
• Indoor Temperature Display: Shows current indoor temperature in Fahrenheit or Celsius.
• Indoor Relative Humidity Display: Shows current indoor relative humidity.
• Ventilation Movement: Indicated on screen.
• Maintenance Reminder: An indicator will appear when maintenance is due.
• Error Code Messages: Displayed to assist with troubleshooting.

Modes of Operation

• ECO Mode (Automatic): This unique one-touch mode automatically selects the optimal operating settings based on current home conditions. It is designed to lower energy consumption by up to 25% while maintaining desired indoor air quality.
• Manual Modes:
  • Ventilation Mode: Allows manual control over the ventilation process.
  • Fan Speed: Adjust the fan speed of the connected ventilation unit.
• MAX Mode: Provides extra ventilating power to quickly clear the air. When activated, the system exchanges indoor air for outdoor air at maximum speed for a user-selected duration of 20, 40, or 60 minutes.

Settings and Preferences

• Temperature Units: Select between Fahrenheit or Celsius for temperature display.
• Humidity Preferences: Set desired indoor relative humidity levels.
• Power Outage Retention: All programmable settings are retained automatically during power outages, eliminating the need for re-configuration.

Maintenance

The Fantech ECO-Touch control requires minimal maintenance. The unit does not use batteries, so there is no need for battery replacement.

• Cleaning: Gently wipe the touch screen and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Maintenance Reminder: The control features a maintenance reminder indicator. When this indicator appears, it typically signals that the connected ventilation unit may require filter cleaning or replacement, or other routine maintenance as specified in the ventilation unit's manual.

Troubleshooting

If you encounter issues with your ECO-Touch control, refer to the following common troubleshooting steps:

For issues not covered here, or if troubleshooting steps do not resolve the problem, please contact Fantech customer support.

Specifications

Warranty and Support

For information regarding the warranty of your Fantech ECO-Touch control, please refer to the warranty documentation provided with your Fantech ventilation unit or visit the official Fantech website. Warranty terms and conditions may vary.

If you require technical assistance, have questions about installation, operation, or troubleshooting, please contact Fantech customer support directly. Contact information can typically be found on the Fantech website or in the packaging of your product.

Fantech Official Website: www.fantech.net (Note: This is a generic link, actual support link may vary by region)