Miyuki DB1001

Miyuki Delica 11/0 Seed Beads DB1001 Instruction Manual

Model: DB1001

1. Introduction

Thank you for choosing Miyuki Delica 11/0 Seed Beads. These precision-cut glass beads, model DB1001, feature a unique Metallic Purple Green Gold Iris finish. Miyuki beads are renowned for their consistent size and uniformity, making them ideal for various beading and jewelry-making projects. This manual provides essential information on handling, usage, and care to ensure the best results with your beads.

Close-up of Miyuki Delica 11/0 seed beads in Metallic Purple Green Gold Iris color

Image 1.1: A close-up view of the Metallic Purple Green Gold Iris Miyuki Delica 11/0 seed beads, showcasing their uniform cylindrical shape and iridescent finish.

2. Setup and Preparation

Your Miyuki Delica beads are supplied in a clear plastic tube for convenient storage and dispensing.

  1. Unpacking: Carefully remove the bead tube from its packaging.
  2. Opening the Tube: The tube has a small cap. Gently pull or twist the cap to open it. Avoid squeezing the tube forcefully to prevent beads from spilling.
  3. Dispensing Beads: To dispense beads, hold the tube over a bead mat or tray. Slowly tilt the tube to allow beads to slide out. You can control the flow by adjusting the tilt angle.
  4. Storage: After use, securely replace the cap on the tube to prevent spillage and protect the beads from dust and moisture.
Miyuki Delica 11/0 seed beads in their clear plastic tube packaging

Image 2.1: The Miyuki Delica 11/0 seed beads packaged in their clear plastic tube, showing the brand and size label.

3. Usage and Application

Miyuki Delica 11/0 seed beads are highly versatile and suitable for a wide range of beading techniques due to their uniform cylindrical shape and large hole size relative to their diameter.

  • Bead Weaving: These beads are excellent for bead weaving techniques such as Peyote stitch, Brick stitch, Loom work, and Right Angle Weave. Their consistent shape allows for tight, even, and professional-looking results.
  • Stringing: Delica beads can be strung onto various beading threads, wires, or cords to create necklaces, bracelets, and earrings. The smooth edges minimize wear on the thread.
  • Embroidery: Use Delica beads for bead embroidery projects, attaching them individually or in small groups to fabric for intricate designs.
  • Needle Size: For 11/0 Delica beads, a size 10 or 12 beading needle is typically recommended. Ensure your chosen thread or wire fits through the 0.8mm inner hole.
  • Color Consistency: While Miyuki strives for color consistency, slight variations may occur between dye lots. It is advisable to purchase enough beads for a single project at one time.

4. Care and Maintenance

Proper care ensures the longevity and beauty of your Miyuki Delica beads.

  • Storage: Store beads in a cool, dry place away from direct sunlight. Prolonged exposure to sunlight can potentially affect certain bead finishes over time. Keep them in sealed containers or their original tubes to prevent dust accumulation and moisture damage.
  • Cleaning: If beads become dusty, gently wipe them with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the bead finish.
  • Handling: Handle beads with clean hands to prevent transferring oils or dirt. While durable, glass beads can break if subjected to extreme force or dropped on hard surfaces.

5. Troubleshooting

Miyuki Delica beads are manufactured to high standards, but occasional issues may arise.

ProblemPossible CauseSolution
Beads not fitting on needle/thread.Needle or thread is too thick for the bead's inner hole (0.8mm).Use a finer beading needle (e.g., size 12) or a thinner beading thread/wire.
Inconsistent bead size/shape.While rare, manufacturing variations can occur.Sort through beads and set aside any that do not meet your project's requirements. Contact your supplier if a significant portion is affected.
Bead finish appears dull or scratched.Accumulation of dust, oils, or abrasive contact.Gently wipe with a soft, dry cloth. Store beads properly to prevent damage.

6. Product Specifications

FeatureDetail
BrandMiyuki
Model NumberDB1001
Bead Size11/0 (Diameter 1.6mm)
Inner Hole Diameter0.8mm
ColorMetallic Purple Green Gold Iris
ShapeCylindrical
MaterialGlass
Quantity (Approx.)1400 beads per 7.2 Gram tube
Item Weight0.02 Pounds (approx. 9 grams for beads + tube)
UPC790524620654

7. Warranty and Support

Miyuki Delica beads are high-quality crafting components. Specific warranty information for individual bead tubes is typically not provided by the manufacturer, as beads are consumable craft supplies.

If you encounter any issues with the quality or quantity of the beads upon receipt, please contact the retailer from whom you purchased the product. They will be able to assist you with returns or exchanges in accordance with their store policies.

For general information about Miyuki products or beading techniques, you may visit the official Miyuki website or consult reputable beading resources online.

© 2023 Miyuki. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.