1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Tycon Systems TP-SCPOE-1248 PoE & Solar 8A Dual Input Battery Charging Controller. This device is designed to efficiently manage power from solar panels and other DC sources to charge 12V batteries and provide regulated 48V Power over Ethernet (PoE) output, along with a 12V auxiliary output.
2. Key Features
- 12V 8A PWM Solar Battery Charger with 48V 30W Passive PoE out and 12V 1.5A Aux out.
- Accepts 18-57V 2A Passive PoE Input for Auxiliary Charging of Batteries.
- PoE Pinout: 4,5V+; 7,8V-, Shielded.
- Includes DIN Rail Mounting Kit for versatile installation.
- Ideal for Remote Power Systems, Surveillance, Sensors, Wireless Stations, AP/Client/Repeaters, UPS Systems, Lighting, Fences, and Gates.
3. Package Contents
Please verify that all items are present and in good condition upon opening the package:
- Tycon Systems TP-SCPOE-1248 Controller Unit
- DIN Rail Mounting Kit
- Quick Start Guide (or similar documentation)
4. Safety Information
Read all instructions carefully before installation and operation. Failure to do so may result in equipment damage or personal injury.
- Ensure proper ventilation around the unit.
- Do not expose the unit to moisture or extreme temperatures.
- Always disconnect power before making or breaking connections.
- Use appropriate wiring gauges for all connections to prevent overheating.
- Observe correct polarity for solar panel and battery connections. Reverse polarity can damage the unit.
5. Setup and Installation
The TP-SCPOE-1248 is designed for easy installation. Follow these steps for proper setup:
5.1 Physical Installation
Mount the controller in a secure, well-ventilated location, away from direct sunlight and moisture. The included DIN Rail Mounting Kit allows for convenient installation on standard DIN rails.
5.2 Connection Diagram
Figure 1: Front view of the Tycon Systems TP-SCPOE-1248 controller. This image displays the device's front panel, featuring a green terminal block for "SOL" (Solar) and "BAT" (Battery) connections with clearly marked positive and negative terminals. To the right, there are two RJ45 Ethernet ports for PoE input and output, labeled "IN" and "POE OUT". Above the PoE output port, a small fuse holder is visible, marked "FUSE OUT Max 8A". On the far right, a vertical row of five LED indicators is present, labeled "POE", "SOL", "CHA", "LOA", and "REV", providing status feedback. The overall casing is black with ventilation grilles on the sides.
5.3 Wiring Connections
- Battery Connection: Connect your 12V battery to the "BAT" terminals on the green terminal block. Ensure correct polarity (+ to + and - to -).
- Solar Panel Connection: Connect your solar panel (up to 130W) to the "SOL" terminals on the green terminal block. Observe correct polarity.
- PoE Output: Connect your PoE-powered device (e.g., wireless access point, IP camera) to the "POE OUT" RJ45 port. This port provides 48V Passive PoE.
- PoE Input (Optional): If auxiliary battery charging is desired from an external PoE source, connect an 18-57V 2A Passive PoE source to the "IN" RJ45 port.
- Auxiliary 12V Output: The unit also provides a 12V 1.5A auxiliary output. Refer to the product specifications for connection details if needed.
Note: The PoE Pinout is 4,5V+; 7,8V-, Shielded. Ensure your PoE devices are compatible with this passive PoE standard.
6. Operating Instructions
Once all connections are made, the TP-SCPOE-1248 will automatically begin managing power. Monitor the LED indicators for operational status:
| LED Label | Description |
|---|---|
| POE | Indicates Power over Ethernet output is active. |
| SOL | Indicates solar panel input is detected and active. |
| CHA | Indicates battery charging is in progress. |
| LOA | Indicates low battery voltage alarm or load disconnect. |
| REV | Indicates reverse polarity connection on solar or battery input. Immediately disconnect power if this LED is lit. |
7. Maintenance
The TP-SCPOE-1248 is designed for reliable operation with minimal maintenance. However, periodic checks are recommended:
- Connections: Periodically inspect all wiring connections to ensure they are secure and free from corrosion.
- Cleanliness: Keep the unit clean and free of dust and debris to ensure proper heat dissipation. Use a soft, dry cloth for cleaning.
- Battery Health: Monitor the health of your 12V battery. A failing battery can impact system performance.
- Fuse Check: If the PoE output is not functioning, check the 8A fuse located near the PoE output port. Replace with a fuse of the same rating if necessary.
8. Troubleshooting
If you encounter issues with your TP-SCPOE-1248, refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| No LEDs are lit. |
|
| REV LED is lit. |
|
| CHA LED not lit when solar is active. |
|
| No PoE output (POE LED off). |
|
9. Specifications
| Attribute | Value |
|---|---|
| Model Number | TP-SCPOE-1248 |
| Brand | Tycon |
| Solar Charger Type | PWM |
| Solar Input Voltage | Optimized for 12V solar panels (up to 130W) |
| Battery Voltage | 12V |
| Battery Charge Current | 8A (Max) |
| PoE Output Voltage | 48V Passive PoE |
| PoE Output Power | 30W (Max) |
| PoE Pinout | 4,5V+; 7,8V-, Shielded |
| Auxiliary Output | 12V 1.5A |
| PoE Input for Aux Charging | 18-57V 2A Passive PoE |
| Product Dimensions | 4.65 x 6.26 x 1.57 inches (11.81 x 15.90 x 3.99 cm) |
| Item Weight | 11 ounces (312 grams) |
| Color | Black |
| Manufacturer | Tycon Power Systems |
| ASIN | B00BNHZ680 |
| UPC | 633090397547 |
10. Warranty and Support
Tycon Systems products are designed for durability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official Tycon Systems website. For technical support or inquiries, please contact Tycon Systems customer service.
Note: This product is from a small business brand. Support small businesses.
