Introduction
The PROFLO PFS5838 Lansford Drop-In Acrylic Soaking Tub is designed to provide a comfortable and relaxing bathing experience. Constructed from durable, Easy-Care acrylic material with reinforced composites, this tub is built for longevity and ease of maintenance. All ProFlo products undergo factory testing to ensure flawless functionality.
This manual provides essential information for the setup, operation, and maintenance of your new soaking tub.
Product Overview
Figure 1: Top-down view of the PROFLO Lansford soaking tub.
Figure 2: Angled view showcasing the tub's depth.
Figure 3: Detail of the reversible drain and overflow.
Figure 4: Installed tub in a bathroom environment.
Setup and Installation
The PROFLO Lansford tub is designed for drop-in installation. This means the tub is placed into a pre-cut hole or structure and adheres to the top-side of the surrounding surface.
Pre-Installation Checklist:
- Verify all components are present and undamaged.
- Ensure the installation area is properly prepared, including framing and plumbing rough-ins.
- Confirm the floor structure can support the weight of the tub when filled with water and occupied.
Installation Steps (Summary):
- Prepare the sub-floor and framing according to local building codes and the tub's dimensions.
- Connect the drain and overflow assembly. The tub features a reversible drain for flexible installation.
- Carefully lower the tub into the prepared opening.
- Secure the tub to the framing as per the detailed instructions in the full installation manual.
- Complete plumbing connections and test for leaks.
- Install surrounding finishes (e.g., tile, decking).
For detailed installation instructions, please refer to the official Installation Manual (PDF) provided by ProFlo.
Operating Instructions
Using your PROFLO Lansford soaking tub is straightforward, designed for a relaxing bath experience.
Filling the Tub:
- Ensure the drain stopper is securely closed.
- Turn on the water supply to your desired temperature. The tub's acrylic material helps to hold the heat or coolness of the water effectively.
- Fill the tub to a comfortable level, ensuring the overflow drain is not submerged if you plan to fill it to the maximum capacity.
Draining the Tub:
- Open the drain stopper to allow water to empty from the tub.
- Ensure all water has drained completely before cleaning or exiting the tub.
The tub features a textured, slip-resistant surface on the bottom for added safety.
Maintenance and Care
Proper care will ensure the longevity and pristine appearance of your PROFLO Lansford acrylic soaking tub.
Cleaning:
- Clean the tub regularly with a soft cloth or sponge and a non-abrasive, mild liquid cleaner.
- Avoid using abrasive cleaners, scouring pads, or harsh chemicals (e.g., acetone, paint thinner, strong acids/bases) as these can damage the acrylic surface.
- Rinse the tub thoroughly with clean water after cleaning to remove any cleaner residue.
- The acrylic material is designed to be stain-resistant and easy to wash.
Preventing Damage:
- Do not drop heavy or sharp objects into the tub, as this can cause chips or cracks.
- Avoid prolonged contact with rubber mats or suction cups, as they may cause discoloration over time.
- Ensure proper ventilation in the bathroom to prevent mold and mildew buildup.
Troubleshooting
This section addresses common issues you might encounter with your soaking tub.
| Problem | Possible Cause | Solution |
|---|---|---|
| Slow Draining | Hair or debris in the drain. | Remove the drain stopper and clear any obstructions. Use a drain snake if necessary. Avoid harsh chemical drain cleaners. |
| Water Spots/Residue | Hard water deposits or soap scum. | Clean with a mild, non-abrasive cleaner and rinse thoroughly. For hard water spots, use a vinegar and water solution. |
| Surface Dullness | Accumulation of soap film or improper cleaning agents. | Ensure you are using only non-abrasive cleaners. Polish with an acrylic-safe polish if needed. |
Specifications
| Feature | Detail |
|---|---|
| Brand | ProFlo |
| Model Number | PFS5838WH |
| Color | White |
| Material | Acrylic |
| Product Dimensions (L x W x H) | 37.38"L x 38"W x 20.5"H |
| Installation Type | Drop-In |
| Capacity | 50 Gallons |
| Item Weight | 92 Pounds |
| Shape | Rectangular (Oval interior) |
| UPC | 781889041819 |
Warranty Information
The PROFLO PFS5838 Lansford Drop-In Acrylic Soaking Tub is fully covered under ProFlo's 5-year bathtub warranty. This warranty period is five times the industry standard, reflecting the manufacturer's confidence in the product's quality and durability.
For specific terms and conditions of the warranty, please refer to the documentation included with your purchase or contact ProFlo customer support.
Customer Support
Should you require assistance with your PROFLO Lansford soaking tub, including installation queries, troubleshooting, or warranty claims, please contact ProFlo customer support.
You can find contact information on the official ProFlo website or through your retailer. For general inquiries, you may also visit the ProFlo Store on Amazon.
