Introduction
This manual provides essential instructions for the safe and efficient operation of your Onkyo HT-S5600 7.1 Channel Home Theater Receiver System. Please read this manual thoroughly before using the system and retain it for future reference. The HT-S5600 system is designed to deliver immersive audio experiences for movies, music, and games, featuring advanced connectivity and sound optimization technologies.
Safety Information
To ensure safe operation and prevent damage, observe the following precautions:
- Do not expose the unit to rain or moisture.
- Do not block ventilation openings.
- Avoid placing the unit near heat sources.
- Use only specified power supply voltage.
- Do not open the casing; refer all servicing to qualified personnel.
- Ensure proper speaker impedance matching to prevent damage to the receiver.
Package Contents
Verify that all items are present in the package:
- Onkyo HT-S5600 AV Receiver
- 7.1 Channel Speaker System (including front, center, surround, surround back/height speakers, and a powered subwoofer)
- Remote Control (RC-863M)
- Audyssey Setup Microphone
- FM Indoor Antenna
- AM Loop Antenna
- Speaker Cables
- Subwoofer Cable
- Power Cord
- Quick Start Guide and other documentation
Setup
Connecting Speakers
Connect your 7.1 channel speaker system to the corresponding terminals on the rear panel of the receiver. Ensure correct polarity (+ to + and - to -) for all speakers. The system supports a 7.1 channel configuration, including front, center, surround, and surround back/height speakers, along with a powered subwoofer.
Image: Rear panel connections of the Onkyo HT-S5600 receiver. This view displays the various audio and video input/output ports, including HDMI, digital audio, analog audio, and speaker terminals for a 7.1 channel setup.
Connecting Audio/Video Sources
Utilize the HDMI inputs for high-definition audio and video devices such as Blu-ray players, gaming consoles, and cable/satellite boxes. The receiver features 4 HDMI inputs and 1 output. For other devices, use the appropriate digital or analog audio/video inputs.
Image: Front panel of the Onkyo HT-S5600 receiver. This image highlights the main display, master volume knob, input selection buttons, and front-panel connections including a USB port and auxiliary audio/video inputs.
The front panel USB port allows for direct digital connection of an iPod/iPhone for audio playback and charging. It also supports USB flash drives for compressed and lossless audio.
Power Connection
After all audio/video and speaker connections are made, connect the power cord to the receiver and then to a wall outlet.
Initial Configuration (Audyssey 2EQ)
For optimal sound performance, use the included Audyssey setup microphone to automatically calibrate your speaker system to your room's acoustics. Connect the microphone to the front panel jack and follow the on-screen instructions.
Image: Audyssey setup microphone. This microphone is used to measure the acoustic properties of your listening room and automatically calibrate the speaker settings for optimal sound.
Operating Instructions
Power On/Off
Press the ON/STANDBY button on the front panel or the remote control to turn the receiver on or off.
Input Selection
Use the input selector buttons on the front panel (e.g., BD/DVD, CBL/SAT) or the SOURCE buttons on the remote control to select your desired audio/video source.
Volume Control
Adjust the master volume using the large knob on the front panel or the VOL +/- buttons on the remote control.
Sound Modes
Press the LISTENING MODE button on the front panel or remote to cycle through various sound modes (e.g., Stereo, Dolby TrueHD, DTS-HD Master Audio, THX, etc.) to match your content and preference.
USB Playback
Connect your iPod/iPhone or USB flash drive to the front USB port. Use the receiver's display and remote control to navigate and play audio files.
Bluetooth Audio Streaming
If you have the optional UBT-1 Bluetooth adapter, connect it to the dedicated port. Pair your Bluetooth-enabled device with the receiver to stream audio wirelessly. The aptX codec ensures near CD-quality sound.
Zone 2 Operation
The receiver supports powered Zone 2 output, allowing you to distribute audio to a second room. Refer to the detailed manual for specific wiring and control instructions for multi-room audio.
Using the Remote Control
The included remote control (RC-863M) provides full control over the receiver's functions. Familiarize yourself with the button layout for convenient operation.
Image: Onkyo RC-863M remote control. This remote provides comprehensive control over the receiver's various functions, including input selection, volume, sound modes, and menu navigation.
Maintenance
Cleaning
Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. For stubborn stains, lightly dampen a cloth with water and mild detergent, then wipe dry.
Storage
If storing the unit for an extended period, disconnect it from the power outlet and store it in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
Before contacting support, please refer to the following common issues and solutions:
- No Power: Ensure the power cord is securely connected to both the receiver and the wall outlet. Check the power outlet with another device.
- No Sound:
- Verify that the correct input source is selected.
- Check speaker connections for proper polarity and secure fit.
- Ensure the volume is not muted or set too low.
- Confirm that the speaker impedance matches the receiver's specifications.
- Subwoofer Not Working:
- Check the subwoofer's power connection and ensure it is turned on.
- Verify the subwoofer cable connection between the receiver and the subwoofer. A faulty cable can prevent signal transmission.
- Ensure the subwoofer output is enabled in the receiver's settings.
- Remote Control Not Responding:
- Replace the batteries in the remote control.
- Ensure there are no obstructions between the remote and the receiver's IR sensor.
- Confirm the remote is set to control the receiver (if it's a universal remote).
Specifications
| Feature | Specification |
|---|---|
| Brand | Onkyo |
| Model Number | HT-S5600 |
| Channels | 7.1 |
| Power Output (Receiver) | 130 Watts per channel (6 ohms, 1 kHz, 1% THD, 1 channel driven); 80 Watts per channel (8 ohms, 20 Hz–20 kHz, 0.7% THD, 2 channels driven, FTC) |
| Total Output Wattage | 1030 Watts (System) |
| HDMI Inputs/Output | 4 In / 1 Out |
| Special Features | Audio Return Channel, Direct Digital Connection (USB for iPod/iPhone) |
| Connectivity | HDMI, Audio I/O, Digital Audio IN (OPT/COAX), Composite I/O, Component Video I/O, USB |
| Dimensions (Product) | 47.63 x 77.15 x 76.84 cm; 34.02 kg (approx.) |
| Power Source | AC |
| Batteries Required | Yes (2 AA for remote, included) |
Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your product or visit the official Onkyo website. Keep your purchase receipt as proof of purchase for warranty claims.
Online Support: www.onkyo.com/support