Wahl Professional 5 Star Series Senior Clipper #56291 Instruction Manual

Introduction

Thank you for choosing the Wahl Professional 5 Star Series Senior Clipper. This manual provides essential information for the safe and effective use, maintenance, and care of your new clipper. Please read all instructions carefully before operating the device.

Important Safety Information

WARNING: To reduce the risk of electric shock or injury:

• Avoid contact with eyes, skin, and water.
• Do not use on infants.
• Always unplug the clipper when not in use, before cleaning, or before performing maintenance.
• Keep out of reach of children.
• Do not operate any appliance with a damaged cord or plug, or if the appliance malfunctions or has been dropped or damaged.
• For professional use only.

This clipper features high precision carbon steel blades and a durable aluminum metal bottom housing.

Package Contents

Verify that all items are present in the package:

• Wahl Professional 5 Star Series Senior Clipper
• 3 Attachment Comb Cutting Guides (1/16", 1/8", 3/16")
• Styling Comb
• Cleaning Brush
• Clipper Blade Oil
• Red Blade Guard
• Operating Instructions (this manual)

Image: The Wahl Professional 5 Star Series Senior Clipper shown with its complete set of accessories, including three attachment combs, a styling comb, cleaning brush, blade oil, and a red blade guard.

Product Features

• V9000 Electromagnetic Motor: Provides powerful and consistent cutting performance.
• Adjustable Blades: Can be set to zero-overlap for precision fading and close cutting.
• Durable Construction: Features an aluminum metal bottom housing for enhanced longevity.
• Corded Electric Operation: Ensures continuous power without battery limitations.

Image: A graphic highlighting key features of the clipper, including the V9000 motor, zero-overlap adjustable blades, and included cutting guides.

Setup

1. Unpack: Carefully remove the clipper and all accessories from the packaging.
2. Inspect: Check the clipper for any visible damage. Ensure the blades are clean and properly aligned.
3. Oil Blades: Before first use, apply a few drops of the included clipper blade oil across the top of the blades. Turn the clipper on for a few seconds to distribute the oil. Wipe off any excess oil.
4. Connect Power: Plug the clipper into a suitable electrical outlet. Ensure the voltage matches the clipper's requirements.

Operating Instructions

General Use

• Ensure hair is clean and dry before cutting.
• Select the appropriate attachment comb for the desired hair length. Slide the comb securely onto the clipper blade.
• Turn the clipper on using the side switch.
• Begin cutting against the direction of hair growth, using smooth, overlapping strokes.
• Regularly clear hair from the blades during use to maintain cutting efficiency.
• After use, turn off the clipper and unplug it.

Tapering and Fading

The Wahl Senior Clipper is specifically designed for on-scalp tapering and fading, as well as clipper-over-comb work and precision fades.

• Use the adjustable taper lever on the side of the clipper to change the cutting length without changing attachment combs. Push the lever up for a shorter cut and down for a longer cut.
• For zero-overlap cutting, adjust the blades as described in the "Blade Adjustment" section under Maintenance.
• Practice on a mannequin head or a less visible area before attempting complex fades.

Image: A graphic illustrating the suggested uses for the clipper, including traditional on-scalp tapering, fading, clipper-over-comb work, and precision fades.

Maintenance

Cleaning

1. Unplug: Always ensure the clipper is unplugged before cleaning.
2. Brush Blades: Use the cleaning brush to remove loose hairs from the blades.
3. Wipe Body: Wipe the clipper body with a clean, dry cloth. Do not immerse the clipper in water.

Oiling Blades

To maintain optimal cutting performance and blade longevity, oil the blades regularly (after every few uses or as needed).

1. With the clipper unplugged, apply 2-3 drops of Wahl clipper oil across the top of the blades.
2. Turn the clipper on for a few seconds to allow the oil to distribute evenly.
3. Wipe off any excess oil with a soft cloth to prevent it from running into the motor housing.

Blade Adjustment (Zero-Overlap)

The blades can be adjusted for a closer cut (zero-overlap). This adjustment should be performed with caution as improper alignment can cause skin irritation or cuts.

1. Unplug the clipper.
2. Loosen the two screws on the stationary blade slightly.
3. Carefully align the top blade with the bottom blade so that the cutting edge of the top blade is slightly behind the cutting edge of the bottom blade. Ensure the teeth of the top blade are centered over the teeth of the bottom blade.
4. Tighten the screws firmly.
5. Test the clipper on a small section of hair or a test strip to ensure proper cutting and no pulling.

Troubleshooting

Specifications

• Model: 5 Star Series Senior Clipper #56291
• Motor: V9000 Electromagnetic
• Power Source: Corded Electric
• Blade Material: Metal (Carbon Steel)
• Housing Material: Aluminum, Plastic
• Product Dimensions: 40.64 x 20.32 x 58.42 cm (L x W x H)
• Item Weight: 840 Grams
• Manufacturer: Wahl Canada
• UPC: 064132562911

Image: A detailed view of the Wahl Professional 5 Star Series Senior Clipper, showcasing its design and heavy-duty construction.

Warranty and Support

Warranty Information

The Wahl Professional 5 Star Series Senior Clipper comes with a Limited One Year Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, unauthorized modification, or normal wear and tear.

Please retain your proof of purchase for warranty claims.

Customer Support

For technical assistance, warranty service, or to order replacement parts, please contact Wahl Professional customer support. Contact information can typically be found on the Wahl Professional website or on your product packaging.

Manufacturer: Wahl Canada

Place of Business: TORONTO, ON, M1H 2X6 CA