AL-KO EKI 2200/40 Electric Chainsaw User Manual

Introduction

Welcome to the user manual for your AL-KO EKI 2200/40 Electric Chainsaw. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your chainsaw. Please read it thoroughly before first use and keep it for future reference.

The AL-KO EKI 2200/40 is a practical electric chainsaw designed for high traction and cutting performance. Its longitudinal motor design offers improved maneuverability in dense branches and optimal weight distribution. Key features include tool-free chain tensioning, an automatic chain lubrication system, and a quick-stop chain brake for enhanced safety.

Safety Instructions

Always prioritize safety when operating power tools. Failure to follow these instructions may result in serious injury.

• Read and understand all safety warnings and instructions before use.
• Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and sturdy footwear.
• Ensure the work area is clear of obstacles and bystanders.
• Do not operate the chainsaw in wet conditions or near flammable liquids/gases.
• Disconnect the power supply before performing any maintenance or adjustments.
• Keep hands and feet away from the chain when the chainsaw is connected to power.
• Use both hands to grip the chainsaw firmly during operation.
• Be aware of kickback and how to avoid it.

Product Overview

The AL-KO EKI 2200/40 Electric Chainsaw is characterized by its powerful motor and ergonomic design.

This image shows the AL-KO EKI 2200/40 electric chainsaw from a top-down, slightly angled perspective. The chainsaw is predominantly grey and black with red accents on the chain tensioning knob and motor housing. It features a long guide bar and chain, a front handle, and a rear handle with a power cord extending from it. The guide bar has "OREGON" and "DOUBLE GUARD" markings.

Key Features:

• Powerful 2200 W electric motor.
• 40 cm (15.7 inches) cutting length.
• Chain speed: 13.5 m/s.
• Automatic chain lubrication.
• Tool-free chain tensioning and replacement.
• System brake with quick chain stop for safety.
• Oil level check window on the oil tank.
• Lightweight design at approximately 5.4 kg (11.9 lbs).

Setup

Unpacking

Carefully remove all components from the packaging. Verify that all parts are present and undamaged. Refer to the packing list for a complete inventory.

Assembling the Guide Bar and Chain

The chainsaw features a quick clamping device for tool-free chain tensioning and replacement.

1. Ensure the chainsaw is unplugged from the power source.
2. Loosen the chain cover knob (usually red, on the side of the motor housing).
3. Remove the chain cover.
4. Place the chain around the sprocket and guide bar, ensuring the cutting edges are facing the correct direction.
5. Fit the guide bar onto the mounting studs.
6. Replace the chain cover and tighten the knob until the chain is snug but can still be moved by hand.

Filling the Chain Oil Tank

The chainsaw features automatic chain lubrication.

1. Locate the oil tank cap, typically on the top or side of the chainsaw body.
2. Unscrew the cap and fill the tank with high-quality chain lubricant. Do not overfill.
3. The oil level can be quickly checked through the viewing window on the oil tank.
4. Securely replace the oil tank cap.

Operating Instructions

Before Starting

• Always perform a pre-operation check:
  • Check chain tension.
  • Check oil level.
  • Inspect the chain for sharpness and damage.
  • Ensure all handles and guards are securely in place.
  • Verify the power cord is in good condition and properly connected.
• Ensure you are wearing all required PPE.

Starting the Chainsaw

To start the AL-KO EKI 2200/40:

1. Plug the chainsaw into a suitable power outlet (240 Volts).
2. Grip both handles firmly.
3. Engage the safety switch (if present) and press the trigger switch.

Cutting Techniques

Always maintain a stable stance and good balance.

• For felling small trees, make a directional notch first, then the felling cut.
• For limbing, work from the bottom up, supporting the branch if necessary.
• For bucking (cutting logs into sections), ensure the log is stable and supported. Be aware of pinching.

This image shows a person wearing safety gear, including a helmet with a face shield and ear protection, operating the AL-KO EKI 2200/40 electric chainsaw. The person is cutting a log placed on a sawhorse, demonstrating proper cutting posture and equipment use.

This image provides a close-up view of the AL-KO EKI 2200/40 electric chainsaw in action, cutting a log. The user, wearing protective gear, is visible in the background, focusing on the cutting task. The chainsaw's guide bar and chain are clearly visible engaged with the wood.

Stopping the Chainsaw

Release the trigger switch. The system brake will quickly stop the chain. Disconnect the chainsaw from the power supply after use.

Maintenance

Regular maintenance ensures the longevity and safe operation of your AL-KO EKI 2200/40 chainsaw. Always disconnect the power before performing any maintenance.

Chain Maintenance

• Sharpening: Keep the chain sharp for efficient and safe cutting. Refer to a specialized guide or professional for proper sharpening techniques.
• Tensioning: Check chain tension frequently. A properly tensioned chain should be snug against the guide bar but still allow you to pull it around the bar by hand.
• Replacement: Replace worn or damaged chains promptly. The tool-free quick clamping device simplifies this process.

Guide Bar Maintenance

• Clean the guide bar groove regularly to remove sawdust and debris.
• Flip the guide bar periodically to ensure even wear.

Lubrication System

• Regularly check the oil level through the viewing window and refill as needed.
• Use only recommended chain lubricant.
• Ensure the automatic lubrication system is functioning correctly by observing oil spray during operation.

Cleaning

• After each use, clean the chainsaw body, guide bar, and chain to remove sawdust, resin, and debris.
• Use a brush or compressed air. Do not use water directly on electrical components.

Troubleshooting

This section provides solutions to common issues you might encounter.

If the problem persists after attempting these solutions, please contact AL-KO customer service or an authorized service center.

Specifications

Warranty and Support

AL-KO offers a warranty for this product. For details regarding the warranty period and terms, please refer to the warranty card included with your purchase or visit the official AL-KO website.

This image displays a circular badge with "TOP SERVICE" at the top and "2+2 ANNI ESTENSIONE Garanzia tramite REGISTRAZIONE ONLINE" (2+2 YEARS WARRANTY EXTENSION via ONLINE REGISTRATION) in the center, along with five stars and the website "www.al-ko.com/garden". This indicates an extended warranty program available upon online registration.

For technical assistance, spare parts, or service inquiries, please contact AL-KO customer support or an authorized service center. You can find contact information on the AL-KO website or in your product documentation.

Online registration for warranty extension may be available at www.al-ko.com/garden.