Introduction
This instruction manual provides detailed guidance for the safe installation, operation, and maintenance of your new Progress Lighting Outdoor Wall Lantern. Please read all instructions carefully before beginning installation and retain this manual for future reference. Proper installation and care will ensure optimal performance and longevity of your lighting fixture.
Image: Front view of the 1-Light Clear Flat Glass Traditional Outdoor Wall Lantern Light in Antique Bronze finish.
Safety Information
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with proper electrical wiring installations.
- Use only UL/cUL listed wire connectors.
- This fixture is designed for outdoor use and is suitable for wet locations.
- Do not exceed the maximum wattage specified for the bulb.
- Wear safety glasses and gloves during installation.
Package Contents
Verify that all parts listed below are included in your package:
- A. Fixture Body (1)
- B. Mounting Plate (1)
- C. Mounting Screws (2)
- D. Wire Connectors (3)
- E. Decorative Nuts (2)
- F. Glass Panels (4, pre-installed)
Specifications
| Feature | Detail |
|---|---|
| Model Number | P5607-20 |
| Dimensions (W x H) | 4-1/2 inches x 8 inches |
| Finish | Antique Bronze |
| Glass Type | Clear Flat Glass |
| Bulb Type | Medium Base (E26) |
| Max Wattage | 100 Watts (Incandescent equivalent) |
| Location Rating | Wet Location Listed |
Image: Diagram showing the width (4.5 inches) and height (8 inches) of the wall lantern.
Installation Guide
Follow these steps for proper installation of your outdoor wall lantern. It is recommended to watch the accompanying video for visual guidance on sizing and placement.
Tools Required:
- Phillips Head Screwdriver
- Flathead Screwdriver
- Wire Strippers
- Electrical Tape (optional)
- Safety Glasses
Pre-Installation:
- Turn off power: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the main power switch.
- Unpack contents: Carefully remove all components from the packaging. Keep the packaging materials until installation is complete to ensure no small parts are lost.
- Review existing wiring: Ensure the existing electrical box is securely mounted and capable of supporting the fixture's weight.
Mounting the Fixture:
- Attach the mounting plate (B) to the electrical box using the mounting screws (C). Ensure the plate is level and secure.
- Pull the electrical wires from the electrical box through the center hole of the mounting plate.
Wiring Connections:
- Connect the bare copper ground wire from the fixture to the bare copper ground wire from the electrical box using a wire connector (D). If your electrical box has a ground screw, wrap the fixture's ground wire around it before connecting to the supply ground wire.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the electrical box using a wire connector (D).
- Connect the black (hot) wire from the fixture to the black (hot) wire from the electrical box using a wire connector (D).
- Ensure all wire connections are secure. Wrap electrical tape around the wire connectors for added insulation if desired.
Securing the Fixture:
- Carefully push all excess wiring into the electrical box.
- Align the holes on the fixture body (A) with the threaded posts on the mounting plate (B).
- Secure the fixture body to the mounting plate using the decorative nuts (E). Tighten firmly but do not overtighten.
Bulb Installation:
- Insert one medium base (E26) bulb (not included) into the socket. Do not exceed the maximum recommended wattage of 100 Watts.
Image: Side view of the wall lantern with a clear incandescent bulb installed, showing the internal socket.
Sizing and Selection Guidance Video:
For additional guidance on selecting the appropriate size and mounting height for outdoor lighting fixtures, please watch the official Progress Lighting video below:
Video: An official Progress Lighting guide on sizing and selecting outdoor lighting fixtures, covering optimal placement for entryways, garages, and other outdoor areas.
Operating Instructions
Once the fixture is securely installed and wired, restore power at the circuit breaker. The light fixture can then be operated using your wall switch or external control system (if applicable).
Maintenance
- Cleaning: To clean the fixture, turn off the power and allow it to cool. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
- Bulb Replacement: Ensure power is off before replacing the bulb. Allow the bulb to cool completely before touching. Replace with a new medium base (E26) bulb, not exceeding 100 Watts.
- Periodic Inspection: Periodically check all connections and mounting hardware for tightness.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check circuit breaker or fuse. Ensure wall switch is ON. |
| Loose wire connections. | Turn off power and check all wire connections. | |
| Defective bulb. | Replace bulb. | |
| Light flickers. | Loose bulb. | Tighten bulb in socket. |
| Incorrect bulb type or wattage. | Ensure bulb meets specifications. | |
| Loose wiring. | Turn off power and check all wire connections. |
Warranty and Support
Progress Lighting products are manufactured to the highest standards and are backed by a limited warranty. For specific warranty details, technical support, or replacement parts, please visit the official Progress Lighting website or contact their customer service department. Keep your purchase receipt as proof of purchase.
For more information, visit: Progress Lighting Store on Amazon
