UpBright 12V 4A AC/DC Adapter User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your UpBright 12V 4A AC/DC Adapter. This power supply is designed for compatibility with Govee DreamColor 32.8FT LED Strip Lights, specifically models H6116, H6117, and H61171A1, which feature WiFi Wireless Smart Control. Please read this manual thoroughly before operation.

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the product:

• Indoor Use Only: This adapter is designed for indoor use. Do not expose to water, moisture, or high humidity.
• Proper Voltage: Ensure the input voltage (100-240VAC 50/60Hz) matches your local power supply.
• Overload Protection: The adapter features OVP (Over Voltage output Protection), OCP (Over Current output Protection), and SCP (Short Circuit output Protection). Do not attempt to bypass these safety features.
• Ventilation: Ensure adequate ventilation around the adapter during operation to prevent overheating.
• Disconnect Power: Always disconnect the adapter from the power outlet before cleaning or if not in use for extended periods.
• Children and Pets: Keep the adapter and its cords out of reach of children and pets.

3. Product Overview

The UpBright 12V 4A AC/DC Adapter is a reliable power supply unit designed for specific Govee LED strip light models. It provides a stable 12V DC output at 4.0A (48W) to ensure optimal performance of your compatible devices.

Figure 3.1: The UpBright 12V 4A AC/DC Adapter, showing the main unit and attached power cord with a barrel connector.

Figure 3.2: A detailed view of the barrel connector, which plugs into the compatible Govee LED strip lights.

3.1 Key Features

• Input: 100-240VAC, 50/60Hz (World Wide Input Voltage)
• Output: 12VDC, 4.0A, 48W
• Protection: OVP, OCP, SCP (Over Voltage, Over Current, Short Circuit Protection)
• Compatibility: Specifically designed for Govee DreamColor LED Strip Lights models H6116, H6117, H61171A1, and CW1204000.

4. Setup

Follow these steps to set up your UpBright AC/DC Adapter:

1. Unpack the Adapter: Carefully remove the adapter and its power cord from the packaging.
2. Verify Compatibility: Ensure your Govee LED strip light model is listed as compatible (H6116, H6117, H61171A1, CW1204000).
3. Connect to Device: Insert the barrel connector of the adapter firmly into the power input port of your Govee LED strip light controller.
4. Connect to Power Outlet: Plug the AC power cord into a standard wall outlet (100-240VAC).
5. Power On: Once connected, your Govee LED strip lights should power on. Refer to your Govee product's manual for specific operation instructions.

Figure 4.1: The adapter comes with a suitable AC power cord for your region (e.g., US, EU, UK, AU plugs shown).

5. Operating Instructions

The UpBright AC/DC Adapter functions as a dedicated power supply. Its operation is straightforward:

• Once properly connected to a compatible Govee LED strip light and a power outlet, the adapter will supply the necessary power.
• There are no user-adjustable settings on the adapter itself. All control over the LED strip lights (e.g., on/off, color changes, modes) is managed through the Govee controller or the Govee APP.
• The adapter is designed for continuous operation within its specified limits.

6. Maintenance

To ensure the longevity and proper functioning of your adapter:

• Cleaning: Disconnect the adapter from the power source before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures.
• Cable Care: Avoid bending or crimping the power cord excessively. Do not place heavy objects on the cord.
• Inspection: Periodically inspect the adapter and cord for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use immediately.

7. Troubleshooting

8. Specifications

9. Warranty and Support

UpBright stands behind the quality of its products. This adapter comes with the following warranty and support:

• Refund Policy: 30 days refund period from the date of purchase.
• Exchange Policy: 24 months exchange for defective units.

For warranty claims or technical support, please refer to the contact information provided with your purchase or visit the official UpBright website. Please have your purchase details and product model number ready when contacting support.

Figure 9.1: This image indicates the adapter's compatibility with various Govee models, reinforcing its intended use.