Casio F108WHC-7BCF Digital Watch User Manual

Introduction

Thank you for choosing the Casio F108WHC-7BCF Digital Watch. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your new timepiece. Please read this manual thoroughly to ensure optimal performance and longevity of your watch.

Image: Casio F108WHC-7BCF Digital Watch, showcasing its sleek white design and digital display.

Setup

Setting Time and Date

1. In Timekeeping Mode, press the MODE button until the seconds start flashing. This indicates you are in the setting mode.
2. Press the LIGHT button to cycle through the settings: seconds, hour, minute, year, month, day.
3. Use the START/STOP button to adjust the flashing value.
4. Once all settings are correct, press the MODE button to exit the setting mode.

Setting the Daily Alarm

1. From Timekeeping Mode, press the MODE button until you reach the Alarm Mode (indicated by 'AL' or a bell icon).
2. Press the LIGHT button to select the hour or minute setting.
3. Use the START/STOP button to adjust the flashing value.
4. Press the MODE button to set the alarm. To turn the alarm on/off, press the START/STOP button in Alarm Mode.

Using the Stopwatch

1. From Timekeeping Mode, press the MODE button until you reach the Stopwatch Mode (indicated by 'ST').
2. Press the START/STOP button to start the stopwatch.
3. Press START/STOP again to stop it.
4. To reset the stopwatch, press the LIGHT button while the stopwatch is stopped.

Activating the LED Backlight

Press the LIGHT button in any mode to illuminate the display for easy viewing in low-light conditions.

Operating Modes

Your Casio F108WHC-7BCF watch features several operating modes accessible via the MODE button:

• Timekeeping Mode: Displays the current time (hour, minute, second), day of the week, and date. This is the default mode.
• Alarm Mode: Allows you to set and activate a daily alarm.
• Stopwatch Mode: Functions as a 1/100 second stopwatch for measuring elapsed time.

Maintenance

Water Resistance

Your Casio F108WHC-7BCF watch is water-resistant up to 165 feet (50 meters). This means it is suitable for everyday use and can withstand splashes, rain, and brief immersion in water. However, it is not recommended for diving or prolonged underwater activities. Avoid operating buttons while the watch is wet or submerged to prevent water ingress.

Image: Icon representing water resistance.

Battery Life

The watch is powered by a long-lasting Lithium Ion battery, providing approximately 7 years of operation. Battery replacement should be performed by a qualified technician to maintain water resistance.

Cleaning Your Watch

To clean your watch, wipe it with a soft, dry cloth. For stubborn dirt, use a soft cloth dampened with water and a mild soap solution, then wipe dry. Avoid using chemical cleaners or solvents as they may damage the watch's resin components.

Troubleshooting

• Display is blank or dim: The battery may be low or depleted. Replace the battery.
• Time is incorrect: Re-adjust the time and date settings as described in the Setup section. Ensure the 12/24-hour format is set correctly.
• Buttons are unresponsive: Ensure the watch is not wet or submerged. If the issue persists, a reset may be required (refer to the full manual for advanced reset procedures) or contact customer support.
• Alarm does not sound: Check if the alarm is activated in Alarm Mode. Ensure the alarm volume is not set to zero (if applicable).

Specifications

Warranty

This Casio watch comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims procedures, please refer to the warranty card included with your product packaging or visit the official Casio website.

Support

For further assistance, product inquiries, or service requests, please contact Casio Customer Support. You can find contact information on the official Casio website or through the documentation provided with your watch.

Official Casio Store: Visit the Casio Store on Amazon

Helpful Videos