Introduction
This manual provides comprehensive instructions for the Redi-Remote replacement remote control, designed for use with specific AIWA audio/video systems. Please read this manual thoroughly before operating the remote control to ensure proper functionality and to maximize your user experience.
Product Overview
The Redi-Remote replacement remote control is a pre-programmed device intended to replicate the functions of the original AIWA remote control models 147791511, RMZ20019, and XRMN5. It requires no additional programming.
Remote Control Layout
Figure 1: Front view of the Redi-Remote replacement remote control. The upper section features primary control buttons, while the lower section, covered by a slide-down panel, contains additional function buttons.
Setup
Battery Installation
The remote control requires 4 AAA batteries. These batteries are typically included with the remote. To install or replace batteries:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover off in the direction indicated by the arrow (if present).
- Insert 4 AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover until it clicks securely into place.
Note: Ensure batteries are inserted correctly to prevent damage to the remote control. Remove batteries if the remote will not be used for an extended period.
Operating Instructions
This remote control is pre-programmed and ready for immediate use with compatible AIWA units. Point the remote directly at your AIWA system's infrared receiver.
Upper Section Buttons
| Button | Function |
|---|---|
| PWR (Power) | Turns the AIWA system on or off. |
| SLEEP | Activates the sleep timer function. |
| TVI/VIDEO | Selects TV or Video input source. |
| DISP (Display) | Changes or shows display information. |
| VOL + / VOL - | Increases or decreases the volume level. |
| MUTE | Mutes or unmutes the audio output. |
| CH+ / CH- | Changes channels up or down (if applicable). |
| MENU | Accesses the system menu. |
| RECALL | Recalls previous settings or channels. |
| Number Buttons (0-9, 100) | Direct input for channels, tracks, or other numerical selections. |
| ENT (Enter) | Confirms selections or inputs. |
Lower Section Buttons (Slide Down Cover)
To access these functions, slide down the cover located at the bottom of the remote control.
| Button | Function |
|---|---|
| DISC SELECT | Selects a specific disc in a multi-disc changer. |
| CLEAR | Clears current selection or input. |
| SHUFFLE | Activates or deactivates shuffle playback mode. |
| I-BASS | Enhances bass output. |
| REPEAT | Repeats current track, disc, or program. |
| ENTER | Confirms selections within menus or playback. |
| Navigation Arrows (Up, Down, Left, Right) | Navigates through menus and options. |
| Play/Pause (►II) | Starts or pauses playback. |
| Stop (■) | Stops playback. |
| Fast Forward (►►) | Fast forwards through content. |
| Rewind (◄◄) | Rewinds through content. |
| Skip Forward (►|) | Skips to the next track or chapter. |
| Skip Backward (|◄) | Skips to the beginning of the current track or previous track/chapter. |
| TONE | Adjusts audio tone settings (bass, treble). |
| TUNER/BAND | Selects tuner mode (AM/FM) or changes radio bands. |
| AUX (Auxiliary) | Selects the auxiliary input source. |
| FUNCT (Function) | Cycles through various functions or modes. |
| DISP (Display) | Changes or shows display information. |
| DIMMER | Adjusts the brightness of the system's display. |
| CLOCK | Accesses clock settings. |
| TIMER | Sets or adjusts timer functions. |
| TUNER MODE | Switches between tuner modes (e.g., stereo/mono). |
| REV MODE | Activates or deactivates reverse playback mode (if applicable). |
| DISC/ALBUM | Selects disc or album. |
| CD EDIT | Accesses CD editing functions. |
Maintenance
To ensure the longevity and proper functioning of your remote control:
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the surface or internal components.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace all batteries at the same time with new ones of the same type.
- Storage: Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Drops: Protect the remote from physical impact, as drops can damage internal circuitry.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Remote not responding. |
|
| Certain buttons do not work. |
|
| Remote is not controlling the correct device. |
|
Specifications
- Brand: Redi-Remote
- Compatible AIWA Models: 147791511, RMZ20019, XRMN5
- Model Number (Redi-Remote): RT147791511
- Power Source: 4 x AAA Batteries (included)
- Connectivity Technology: Infrared
- Dimensions: Approximately 7 x 2.5 x 1 inches (17.8 x 6.4 x 2.5 cm)
- Weight: Approximately 4.5 ounces (127.6 grams)
- Special Feature: No Programming Required
Warranty and Support
For any concerns with the remote after purchase, please contact the seller directly. This replacement remote is manufactured by Redi-Remote.
Redi-Remotes are designed to perform every function for the specific unit they are intended to control and cannot be programmed to control auxiliary devices.