1. Product Overview
The Franke 151046 Frother Head 3.0 Cpl with Cover is a genuine OEM replacement component designed for Franke food service equipment. This part is crucial for the proper functioning of frothing mechanisms in compatible Franke appliances, ensuring reliable performance and safety.
Using genuine OEM parts is recommended to maintain the integrity and operational efficiency of your equipment.
Figure 1: Franke 151046 Frother Head 3.0 Cpl with Cover. This image displays the black plastic frother head, featuring a main cylindrical opening, a rectangular section with internal divisions, and three circular ports at the base. A small white cap is visible on one side.
2. Safety Information
Please read and understand all safety instructions before handling or installing this component. Failure to follow these instructions may result in equipment damage or personal injury.
- Always disconnect power to the appliance before attempting any installation or maintenance.
- Wear appropriate personal protective equipment (PPE) if necessary.
- Ensure the replacement part is compatible with your specific Franke equipment model.
- If you are unsure about any installation step, consult a qualified service technician.
3. Product Components
The Franke 151046 Frother Head 3.0 Cpl with Cover includes the main frother head assembly and its protective cover. This unit is designed as a complete replacement part.
- Frother Head: The primary component responsible for milk frothing.
- Cover: Protects internal mechanisms and ensures proper sealing.
4. Setup and Installation
This section provides general guidance for installing the Franke 151046 Frother Head. Specific installation steps may vary depending on your Franke appliance model. Always refer to your appliance's primary service manual for detailed instructions.
- Preparation: Ensure the appliance is turned off and unplugged from the power source. Allow any hot components to cool down.
- Access: Carefully open or remove panels on your Franke appliance to access the existing frother head assembly.
- Removal: Disconnect any hoses, tubes, or electrical connections attached to the old frother head. Note their positions for reinstallation. Remove the old frother head.
- Installation: Position the new Franke 151046 Frother Head in place. Reconnect all hoses, tubes, and electrical connections securely. Ensure all connections are tight to prevent leaks.
- Securing: Reattach any panels or covers removed during the process.
- Testing: Plug in the appliance and perform a test run according to your appliance's operating instructions to verify proper function and check for any leaks.
5. Operating Instructions
The Franke 151046 Frother Head is a component part. Its operation is integrated into the overall functionality of your Franke coffee or beverage machine. Refer to the primary user manual of your specific Franke appliance for detailed operating instructions related to milk frothing and beverage preparation.
Ensure the frother head is clean and properly installed before each use to achieve optimal frothing results.
6. Maintenance and Cleaning
Regular cleaning and maintenance of the frother head are essential for hygiene, optimal performance, and extending the lifespan of the component. Always follow the cleaning instructions provided in your main appliance manual.
- Daily Cleaning: After each use, flush the frother head with hot water or steam to remove milk residue.
- Weekly Cleaning: Disassemble the frother head components (if applicable and instructed by your appliance manual) and clean them thoroughly with a mild detergent and warm water. Use a brush to remove stubborn residue. Rinse all parts completely.
- Descaling: Periodically descale the frother head as part of your appliance's descaling routine, using recommended descaling solutions.
- Inspection: Regularly inspect the frother head for any signs of wear, cracks, or blockages. Replace if damage is observed.
7. Troubleshooting
If you experience issues with milk frothing after installing the new frother head, consider the following general troubleshooting steps:
- No Froth or Poor Froth Quality:
- Ensure the frother head is clean and free of blockages.
- Verify all connections (hoses, tubes) are secure and not leaking.
- Check the milk type and temperature; cold, fresh milk typically froths best.
- Refer to your appliance's main manual for specific frothing settings.
- Leaks:
- Confirm all seals and O-rings are correctly seated and not damaged.
- Ensure all connections are tightened properly.
- Unusual Noises:
- Check for any loose components or foreign objects.
- Ensure the frother head is correctly seated in its position.
If problems persist, consult the troubleshooting section of your Franke appliance's main user manual or contact Franke customer support.
8. Specifications
| Model Number | 151046 |
| Brand | Franke |
| Product Dimensions | 4 x 6 x 8 inches (approximate package dimensions) |
| Item Weight | 3.2 ounces (product weight) / 0.2 pounds (package weight) |
| Country of Origin | Switzerland |
| ASIN | B009EC1G76 |
9. Warranty and Support
As a genuine OEM replacement part, the Franke 151046 Frother Head 3.0 Cpl with Cover is typically covered by the warranty terms applicable to Franke replacement parts. For specific warranty details, please refer to the warranty information provided with your original Franke appliance or contact Franke customer service directly.
For technical support, service inquiries, or to purchase additional genuine Franke parts, please visit the official Franke website or contact their authorized service centers.
