1. Product Overview
This Redi-Remote is a custom-built replacement remote control specifically designed to be compatible with various PDI units, including PDIP20LCD MASTER, PD108312, 510004B, and P23LCD MASTER. It is not an original PDI remote but functions as a direct replacement.
This image displays the full view of the Redi-Remote replacement remote control. The top section features primary controls such as Power, Volume, Channel, Mute, and number keys. The lower section, revealed by sliding down a cover, contains additional function buttons.
Key Features:
- Designed as a direct replacement for specified PDI remote models.
- Measures 7 1/2" x 2 1/4" x 3/4".
- Cannot be programmed to control auxiliary devices; functions solely for the intended PDI unit.
- Features a sliding cover to reveal additional lower half buttons.
2. Setup
Battery Installation:
The remote control requires 4 AAA batteries for operation. These batteries are typically included with your purchase. To install or replace batteries:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover off in the direction indicated by an arrow (if present).
- Insert 4 AAA batteries, ensuring the positive (+) and negative (-) ends align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Initial Use:
This Redi-Remote is pre-programmed for the specified PDI models and typically requires no additional setup or programming. Once batteries are installed, it should be ready for immediate use with your compatible PDI unit.
3. Operating Instructions
Basic Functions (Top Section):
- PWR (Power): Turns the PDI unit on or off.
- TV/VIDEO: Switches between TV and video input modes.
- SLEEP: Activates the sleep timer function.
- DISP (Display): Shows on-screen display information.
- VOL +/- (Volume): Increases or decreases the volume level.
- MUTE: Mutes or unmutes the audio.
- CH +/- (Channel): Changes the channel up or down.
- MENU: Accesses the main menu of the PDI unit.
- RECALL: Switches between the current and previously viewed channel.
- Number Pad (0-9, 100, ENT): Used for direct channel entry and numerical input. Press 'ENT' after entering a channel number.
Advanced Functions (Lower Section - Slide Down):
To access these functions, slide down the cover located on the lower half of the remote control. The buttons revealed include:
- PSM (Picture Sound Mode): Adjusts picture and sound presets.
- SSM (Sound Surround Mode): Controls sound surround settings.
- SAP (Secondary Audio Program): Selects alternative audio tracks (e.g., Spanish, descriptive audio).
- OK: Confirms selections in menus.
- TV/PC: Switches between TV and PC input modes.
- CC (Closed Caption): Toggles closed captions on or off.
- Q.V. (Quick View): Provides a quick view of channels or settings.
- LIST: Displays a list of channels or programs.
- PIP (Picture-in-Picture): Activates or controls the Picture-in-Picture function.
- ARC (Aspect Ratio Control): Adjusts the screen aspect ratio.
- INPUT: Cycles through available input sources.
- POSITION: Adjusts the position of on-screen elements (e.g., PIP window).
- SWAP: Swaps the main and PIP images.
- MODE: Changes the operating mode of the remote or unit.
- PIP CH+: Changes the channel within the Picture-in-Picture window.
4. Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace all batteries at the same time with new ones of the same type.
- Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage and damage. Store in a cool, dry place.
5. Troubleshooting
- Remote not responding:
- Check if batteries are installed correctly with correct polarity.
- Replace old batteries with new ones.
- Ensure there are no obstructions between the remote and the PDI unit's infrared sensor.
- Confirm the remote is pointed directly at the PDI unit.
- Specific buttons not working:
- Ensure the remote is clean and free of debris that might be jamming buttons.
- Verify that the PDI unit is powered on and responsive to other commands.
- Remote does not control auxiliary devices:
- This remote is designed to control only the specified PDI units and cannot be programmed for other devices.
6. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 7 x 2.5 x 1 inches |
| Item Weight | 4.5 ounces |
| Item Model Number | RTPD108312 |
| Batteries Required | 4 AAA batteries (included) |
| Manufacturer | Redi-Remote |
| Connectivity Technology | Infrared |
| Compatible Devices | PDI PDIP20LCD Master, PD108312, 510004B, P23LCD Master |
7. Warranty Information
This Redi-Remote replacement control is typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact Redi-Remote directly. Keep your proof of purchase for warranty claims.
8. Support
If you encounter any issues or have questions regarding your Redi-Remote replacement control, please contact the seller or manufacturer for assistance. Providing your product model number (RTPD108312) and a detailed description of the issue will help expedite support.
