Introduction
This manual provides essential information for the safe and effective use of your Heine 3.5V NiMH rechargeable battery. Please read this manual thoroughly before initial use and retain it for future reference.
This battery is specifically designed for use with Heine BETA handles, including BETA NT, BETA TR, BETA R, Standard F.O. laryngoscope handles, Standard F.O. LED laryngoscope handles, and F.O. angled handles.
Product Overview
Figure 1: Heine 3.5V NiMH rechargeable battery. This image shows the cylindrical battery with its specifications printed on the side, including "REF X-002.99.315" and "3.6V === 700 mAh 2.5Wh".
Figure 2: Example of a Heine BETA handle. This image displays a silver cylindrical handle with a black top section, indicating where the battery would be inserted.
The Heine 3.5V NiMH rechargeable battery is a genuine replacement part designed for specific Heine medical instruments. It provides reliable power for extended use.
Setup and Installation
- Unpack the Battery: Carefully remove the battery from its packaging. Inspect for any visible damage.
- Identify Compatible Handle: Ensure you are using a compatible Heine handle (e.g., BETA NT, BETA TR, BETA R, Standard F.O. laryngoscope handle).
- Open the Handle: Unscrew the bottom cap of your Heine handle to access the battery compartment. Refer to your specific handle's manual for detailed instructions on opening.
- Insert the Battery: Insert the Heine 3.5V NiMH rechargeable battery into the handle with the correct polarity. The battery is designed to be inserted in either direction, as indicated by markings on the battery itself.
- Secure the Handle: Screw the bottom cap back onto the handle until it is securely fastened.
- Initial Charge: It is recommended to fully charge the battery before its first use.
Figure 3: Heine BETA handle with the bottom cap removed, illustrating the battery compartment. This image shows the handle body next to its detached bottom cap, ready for battery insertion.
Operating Instructions
Once the battery is installed and charged, the handle is ready for operation. The battery powers the light source of the connected instrument (e.g., laryngoscope blade).
- Charging: Use only Heine-approved chargers for this battery. Overcharging or using incompatible chargers can damage the battery and pose safety risks. A full charge typically takes 16 hours at 70mA.
- Usage: The battery provides consistent power for the connected instrument. The duration of use will vary depending on the instrument's power consumption and the battery's charge level.
- Battery Life Indicator: Refer to your specific Heine handle's manual for information on its battery life indicator, if available.
Maintenance and Care
- Cleaning: The battery itself does not require cleaning. If the battery contacts become dirty, gently wipe them with a clean, dry cloth. Do not use liquids or abrasive cleaners.
- Storage: Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is advisable to store the battery with a partial charge (around 50%).
- Disposal: Do not dispose of the battery with household waste. NiMH batteries contain materials that require special disposal. Follow local regulations for recycling rechargeable batteries. The battery is marked with a crossed-out wheeled bin symbol, indicating separate collection.
- Avoid Short Circuits: Do not short-circuit the battery terminals.
- Avoid Puncturing: Do not puncture, open, or disassemble the battery.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Instrument not powering on. | Battery not charged, incorrect insertion, or faulty handle. | Ensure battery is fully charged. Check battery polarity (though designed for dual insertion, verify secure fit). Test with another known good battery or handle if possible. |
| Short operating time after full charge. | Battery nearing end of life or improper charging. | Ensure charger is functioning correctly and charging for the recommended duration (16 hours). Consider replacing the battery if it's old. |
| Battery not charging. | Faulty charger, poor contact, or battery defect. | Check charger connection. Clean battery and charger contacts. Try a different charger if available. If problem persists, the battery may be defective. |
If troubleshooting steps do not resolve the issue, contact Heine customer support or your authorized dealer.
Specifications
- Model Number: X-002.99.382 (Replacement for X-002.99.315)
- Battery Type: NiMH (Nickel-Metal Hydride)
- Voltage: 3.6V
- Capacity: 700 mAh (2.5 Wh)
- Charging Time: Approximately 16 hours at 70mA
- Dimensions: 19.69 x 19.69 x 11.02 inches; 0.35 ounces (Note: These dimensions likely refer to packaging. The battery itself is a compact cylindrical unit.)
- Manufacturer: Heine
- Country of Origin: Germany
Warranty and Support
Heine products are manufactured to high quality standards. For warranty information and technical support, please refer to the official Heine website or contact your authorized Heine dealer.
Legal Disclaimer: This is a genuine Heine Made in Germany Original NiMH Rechargeable Battery. Reference Number X-002-99-382.
For further assistance, visit the Heine Store on Amazon or contact Heine customer service directly.
