Tork Singlefold Mini Hand Towel Wall Mounted Dispenser H3 (Model 553108) - Instruction Manual

Introduction

This manual provides instructions for the Tork Singlefold Mini Hand Towel Wall Mounted Dispenser, Model 553108. This compact dispenser is designed for low to medium traffic washrooms, offering efficient one-at-a-time towel dispensing. Its Tork Elevation Design features a modern aesthetic with soft rounded edges and a translucent front for easy monitoring of towel levels.

Setup and Installation

The Tork Singlefold Mini Hand Towel Dispenser is designed for wall mounting. Ensure the chosen location is suitable for secure installation and easy access. The dispenser features boreholes for mounting. Once securely mounted, the dispenser is ready for towel loading.

Loading Paper Towels

To load the dispenser, open the black lid. The dispenser is compatible with H3 C-Fold/singlefold paper towels from Tork. Insert the stack of towels into the dispenser, ensuring they are correctly aligned for one-at-a-time dispensing. Close the lid securely after loading.

Image: A person is shown pulling a single hand towel from the Tork Singlefold Mini Hand Towel Dispenser, which is mounted on a wall in a restroom setting. The dispenser is black with a translucent front panel.

Operating Instructions

This dispenser provides one-at-a-time towel dispensing, which helps reduce consumption and improve hygiene. To retrieve a towel, simply pull the exposed towel downwards from the bottom opening of the dispenser. The next towel will automatically present itself for easy access.

Maintenance

Refilling

The dispenser is designed for easy refilling to prevent towel run-outs. Monitor the towel level through the translucent front panel. When towels are low, open the side-opening hood to access the interior and replenish the supply with compatible Tork H3 C-Fold/singlefold paper towels.

Cleaning

To maintain hygiene and appearance, regularly wipe the exterior of the dispenser with a soft, damp cloth and a mild cleaning solution. Avoid abrasive cleaners or solvents that could damage the plastic surface.

Troubleshooting

Towel Dispensing Issues

• Towels not dispensing: Check if the dispenser is empty and requires refilling. Ensure the paper towels are correctly loaded and not jammed.
• Multiple towels dispensing: Verify that you are using the correct type of Tork H3 C-Fold/singlefold paper towels. Incorrect towel types may not dispense one-at-a-time effectively.

Mounting Stability

If the dispenser feels loose on the wall, check the mounting screws and ensure they are securely fastened. Re-tighten if necessary.

Specifications

Warranty and Support

For warranty information or product support, please refer to the documentation included with your purchase or contact Tork customer service directly. Contact details can typically be found on the official Tork website or product packaging.