TIMEX T2N942

Timex Intelligent Quartz Chronograph Watch T2N942 User Manual

Model: T2N942

1. Introduction

This manual provides instructions for the Timex Intelligent Quartz Chronograph Watch, model T2N942. Please read this manual carefully to understand the functions and proper use of your watch. Keep this manual for future reference.

Front view of the Timex Intelligent Quartz Chronograph Watch T2N942 with black dial and brown leather strap.

Figure 1: Front view of the Timex Intelligent Quartz Chronograph Watch T2N942.

2. Watch Components

Familiarize yourself with the main components of your watch:

  • Crown: Used for setting time and date.
  • Pushers (A and B): Used to operate the chronograph functions.
  • Dial: Displays time, date, and chronograph sub-dials.
  • Hands: Hour, minute, second, and chronograph hands.
  • Strap: Brown leather strap with buckle clasp.
Side view of the Timex Intelligent Quartz Chronograph Watch T2N942 showing the crown and two pushers.

Figure 2: Side view illustrating the crown and pushers.

3. Setup

3.1 Setting Time and Date

  1. Pull the crown out to position 2 (farthest out). The second hand will stop.
  2. Turn the crown clockwise or counter-clockwise to set the correct time. Ensure the AM/PM is correctly set (the date changes around midnight).
  3. Push the crown back to position 1 (normal operating position). The second hand will resume movement.
  4. To set the date, pull the crown out to position 1 (first click).
  5. Turn the crown counter-clockwise to adjust the date.
  6. Push the crown back to the normal operating position.

3.2 Adjusting the Strap

The watch features a leather strap with a buckle clasp. To adjust, simply move the buckle pin to the desired hole on the strap for a comfortable fit. Ensure the watch is snug but not too tight on your wrist.

4. Operating the Chronograph

The chronograph function allows for measuring elapsed time.

  1. Starting: Press Pusher A (top pusher) to start the chronograph. The chronograph second hand will begin to move.
  2. Stopping: Press Pusher A again to stop the chronograph. The elapsed time will be indicated by the chronograph hands.
  3. Resetting: With the chronograph stopped, press Pusher B (bottom pusher) to reset all chronograph hands to their zero positions.
  4. Split Time: Some chronograph models allow for split time measurement. Refer to the specific sub-dial markings on your watch for detailed functionality.

5. Special Features

5.1 Water Resistance

This watch is water resistant to 50 meters (5 ATM). This means it is suitable for short periods of recreational swimming, but not for diving or snorkeling. Do not operate the crown or pushers when the watch is wet or submerged.

5.2 Glow In The Dark

The watch features luminous elements on the dial and hands, providing visibility in low-light conditions after exposure to light.

6. Care and Maintenance

6.1 Cleaning

Wipe the watch case and crystal with a soft, dry cloth. For the leather strap, avoid excessive moisture and clean with a specialized leather cleaner if necessary.

6.2 Water Resistance Precautions

To maintain water resistance, ensure the crown is always pushed in completely. Avoid exposing the watch to extreme temperature changes, which can affect the water seals. Do not press pushers underwater.

6.3 Battery Information

The watch is powered by a quartz movement requiring a battery. When the battery is low, the second hand may jump in 2-second intervals. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and function.

Back view of the Timex Intelligent Quartz Chronograph Watch T2N942 showing the stainless steel case back and brown leather strap.

Figure 3: Watch case back and strap.

7. Troubleshooting

  • Watch not running: Check if the crown is pushed in completely. If not, push it in. If the watch still does not run, the battery may need replacement.
  • Time inaccuracy: Ensure the crown is fully pushed in. If the watch is consistently fast or slow, it may require servicing.
  • Chronograph hands not resetting to zero: This may require a chronograph reset procedure. Consult a service center if the issue persists after attempting to reset by pressing Pusher B.

8. Specifications

FeatureDetail
Model NumberT2N942
Movement TypeQuartz
Display TypeChronograph
Dial ColorBlack
Case ShapeRound
Case Diameter44 Millimetres
Case Thickness12 Millimetres
Band MaterialLeather
Band ColorBrown
Water Resistance Depth50 Metres
Special FeaturesChronograph, Glow In The Dark, Water Resistant
Item Weight68 Grams

9. Warranty and Support

9.1 Warranty Information

This Timex watch comes with a 1-year manufacturer warranty from the date of purchase. To claim your warranty, you must produce either the original bill copy/invoice or the warranty card at any authorized Timex service center.

9.2 Customer Support

For any service-related inquiries or feedback, please contact Timex India customer service:

© 2026 Timex. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.