1. Introduction
Thank you for choosing the OSRAM PARA CLP 25 LED Reflector Bulb. This energy-efficient LED bulb is designed to provide warm white light with an E14 base, suitable for various lighting fixtures. This manual provides essential information for the safe installation, operation, and maintenance of your new bulb.
Image 1: OSRAM PARA CLP 25 LED Reflector Bulb. This image shows the compact reflector shape and the E14 screw base of the bulb.
2. Safety Information
Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- WARNING: Always turn off the power supply at the main switch before installing or replacing the bulb.
- Do not use this bulb in fully enclosed luminaires without adequate ventilation, as this may shorten its lifespan.
- This bulb is designed for indoor use only.
- Do not touch the bulb when it is operating or immediately after turning it off, as it may be hot.
- Ensure the bulb is securely screwed into the socket before restoring power.
- Do not disassemble or modify the bulb. There are no user-serviceable parts inside.
- Dispose of used bulbs according to local regulations.
3. Package Contents
The package contains the following item:
- 1 x OSRAM PARA CLP 25 LED Reflector Bulb (E14)
4. Setup and Installation
Follow these steps to install your OSRAM LED bulb:
- Turn off Power: Ensure the power supply to the light fixture is completely turned off at the circuit breaker or wall switch.
- Remove Old Bulb (if applicable): If replacing an existing bulb, allow it to cool down completely before carefully unscrewing it counter-clockwise from the E14 socket.
- Unpack New Bulb: Carefully remove the OSRAM PARA CLP 25 LED bulb from its packaging.
- Install New Bulb: Gently screw the new LED bulb clockwise into the E14 socket until it is finger-tight. Do not overtighten.
- Restore Power: Turn the power supply back on at the circuit breaker or wall switch.
- Test: Turn on the light switch to confirm the bulb is working correctly.
5. Operating Instructions
The OSRAM PARA CLP 25 LED Reflector Bulb operates like a standard light bulb:
- Turning On/Off: Use the existing wall switch connected to your light fixture to turn the bulb on or off.
- Dimmable Functionality: This bulb is dimmable. If your fixture is connected to a compatible dimmer switch, you can adjust the light intensity. Ensure your dimmer switch is designed for LED bulbs to prevent flickering or damage.
- Light Color: The bulb emits a warm white light (2700K), ideal for creating a comfortable and inviting atmosphere.
6. Maintenance
The OSRAM LED bulb requires minimal maintenance:
- Cleaning: Before cleaning, always turn off the power supply and allow the bulb to cool down. Wipe the bulb with a soft, dry, lint-free cloth. Do not use liquid or abrasive cleaners.
- Replacement: Due to its long lifespan, frequent replacement is not expected. When replacement is necessary, follow the installation steps in Section 4.
7. Troubleshooting
If you encounter issues with your bulb, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture. Bulb not screwed in properly. Faulty bulb. |
Check power supply and wall switch. Turn off power, then re-screw the bulb firmly. Replace the bulb with a new one to test. |
| Bulb flickers. | Incompatible dimmer switch. Loose connection. Power fluctuations. |
Ensure dimmer is LED-compatible. If not, replace dimmer or use bulb without dimming. Turn off power, then re-screw the bulb firmly. Consult an electrician if power fluctuations are suspected. |
| Bulb is too dim or too bright. | Dimmer setting. Incorrect bulb for fixture. |
Adjust dimmer setting. Verify the bulb's specifications match your lighting needs. |
If the problem persists after trying these solutions, please contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | OSRAM |
| Manufacturer | LEDVANCE |
| Model Number | PARA CLP 25 E14 10X1 |
| Product Dimensions (L x W x H) | 1 x 1 x 1 cm |
| Item Weight | 50 grams |
| Shape | Reflector (R) |
| Voltage | 240 Volts |
| Base Type | E14 |
| Luminous Flux | 250 lm |
| Power / Wattage | 4.5 Watts (replaces 25 Watt incandescent) |
| Color Rendering Index (CRI) | 80 |
| Light Type | LED |
| Light Color | Warm White (2700K) |
| Energy Efficiency Class | A |
| Lifespan | Approximately 25,000 hours |
| Dimmable | Yes |
9. Warranty Information
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty information provided with your purchase documentation or visit the official OSRAM website for the most up-to-date warranty policy.
10. Support
For further assistance, product information, or to explore other OSRAM lighting solutions, please visit the official OSRAM Homelighting store:
Visit OSRAM Homelighting Store
You may also refer to the retailer where you purchased the product for local support options.
