Introduction
The Oral-B 3D White Action Power Toothbrush is designed to provide effective cleaning and help whiten teeth by removing surface stains. This battery-powered toothbrush features a unique brush head with Rubberized Bristles and an Action Cup, delivering approximately 14,000 strokes per minute for a thorough clean. This manual provides essential information for the proper setup, operation, and maintenance of your toothbrush.

Image: The Oral-B 3D White Action Power Toothbrush, showcasing its design and brush head.
Product Overview
The Oral-B 3D White Action Power Toothbrush combines rotating and structured bristles to effectively clean and polish teeth. Its compact design makes it convenient for daily use and travel.
Key Features:
- Rotating Action Cup Brush Head: Designed to hug each tooth and retain toothpaste for efficient stain removal.
- Structured Bristles: Engineered to break up plaque and reach between teeth for a comprehensive clean.
- Battery Powered: Operates on a single AA battery (included), offering portability and ease of use without the need for charging cables.
- Replaceable Brush Heads: Compatible with various Oral-B replacement heads for continued optimal performance.
Setup
Your Oral-B 3D White Action Power Toothbrush comes with one AA battery already installed. If you need to replace the battery or install a new one, follow these steps:
- Twist the battery cap at the bottom of the toothbrush handle to the left to open.
- Insert a new AA battery, ensuring correct polarity (+/-). The toothbrush will briefly turn on to indicate proper battery insertion.
- Twist the battery cap to the right until it is tightly sealed to ensure water resistance.

Image: Illustration of the replaceable AA battery compartment in the Oral-B 3D White Action Power Toothbrush.
Operating Instructions
To use your Oral-B 3D White Action Power Toothbrush:
- Wet the brush head and apply a small amount of toothpaste.
- Place the brush head against your teeth and gums.
- Press the ON button to start the toothbrush.
- Guide the brush head slowly from tooth to tooth, allowing the rotating action to clean each surface. Do not scrub aggressively.
- Brush each quadrant of your mouth (upper right, upper left, lower right, lower left) for approximately 30 seconds each, for a total of 2 minutes.
- After brushing, press the OFF button to stop the toothbrush.
- Rinse your mouth and the brush head thoroughly under running water.

Image: A person's smile, highlighting the cleaning and whitening benefits of the toothbrush.
Maintenance
Proper maintenance ensures the longevity and effectiveness of your toothbrush:
- Brush Head Replacement: Replace the brush head every 3 months, or sooner if the brush head becomes worn or loose due to damage. Worn bristles reduce cleaning effectiveness.
- Cleaning the Brush Head: After each use, rinse the brush head thoroughly under running water to remove any toothpaste residue.
- Cleaning the Handle: Wipe the handle with a damp cloth as needed. Ensure the battery cap is tightly sealed to prevent water from entering the battery compartment.
- Compatible Replacement Heads: This toothbrush is compatible with Oral-B Deep Clean, Anti-Microbial, and 3D White Action replacement heads.

Image: A selection of Oral-B replaceable brush heads, demonstrating compatibility.
Safety Information
Please read and adhere to the following safety guidelines:
- Do not use on children under age 3.
- Adult supervision is recommended when the brush is used by children (3+) and persons with special needs.
- Small parts may present a choking hazard.
- Ensure the battery compartment is securely closed to prevent water ingress.
Troubleshooting
If your Oral-B 3D White Action Power Toothbrush is not functioning as expected, consider the following:
- Toothbrush not turning on: Check if the AA battery is correctly inserted with the proper polarity. If the battery is old or depleted, replace it with a new one.
- Reduced power or performance: This often indicates a low battery. Replace the AA battery.
- Brush head feels loose or ineffective: Ensure the brush head is securely attached to the handle. If the bristles are worn, replace the brush head.
Specifications
| Feature | Detail |
|---|---|
| Brand | Oral-B |
| Model Number | 837443 |
| Power Source | Battery Powered (1 AA battery included) |
| Product Dimensions | 2.17 x 1.34 x 9.45 inches |
| Item Weight | 2.56 ounces |
| Bristle Firmness | Medium |
| UPC | 069055837443 |

Image: Product dimensions for the Oral-B 3D White Action Power Toothbrush.
Warranty and Support
For customer service, product information, or warranty inquiries, please contact Oral-B directly:
- Customer Service Number: 1-800-56-OralB
- Website: www.oralb.com
Replacement brush heads are made in Germany. The product is manufactured by Procter & Gamble, Cincinnati, OH 45202.

Image: Back of product packaging with customer service details and safety information.





