Fiskars 38.5" Steel Edger Lawn Tool

1. Product Overview

The Fiskars 38.5" Steel Edger is a robust, manual tool designed for creating clean, precise edges along walkways, garden beds, and other landscape features. Its all-steel construction ensures durability and efficient performance in various soil conditions.

Figure 1: Main view of the Fiskars 38.5" Steel Edger, showcasing its T-handle and half-moon blade.

Key Features:

• Heavy-Duty Steel Construction: Ensures superior durability and longevity.
• Sharpened Steel Blade: Designed to slice cleanly through dense turf and tough soil.
• Large Foot Platform: Maximizes force application for effective cutting and reduces strain.
• Long Handle with T-shaped Grip: Provides comfortable, two-handed control and minimizes bending.
• Powder-Coated Finish: Resists rust and facilitates easy cleaning.

Figure 2: Diagram highlighting the T-shape handle for secure grip, long handle for reduced soreness, powder-coated steel for rust resistance, and durable, welded, hardened steel blade.

2. Setup

The Fiskars 38.5" Steel Edger comes pre-assembled and ready for immediate use. No assembly is required.

Initial Inspection:

1. Unpack the edger carefully from its packaging.
2. Inspect the tool for any signs of damage during transit.
3. Ensure the blade is sharp and free from defects.
4. Verify that the handle is securely attached to the blade assembly.

Safety Precautions:

• Always wear appropriate safety footwear (e.g., sturdy boots) when operating the edger to protect your feet, especially when using the foot platform.
• Wear gardening gloves to improve grip and protect hands.
• Keep children and pets away from the work area.
• The blade is sharp; handle with care to prevent injury.

3. Operating Instructions

Follow these steps for effective and safe use of your Fiskars Steel Edger:

1. Positioning: Place the edger blade along the desired edge line (e.g., between grass and a walkway, or around a garden bed).
2. Grip: Hold the T-shaped handle firmly with both hands.
3. Apply Pressure: Place one foot firmly on the large foot platform located at the top of the blade. This platform is designed to transfer your body weight directly onto the blade, maximizing cutting force.
4. Cut: Push down with your foot while simultaneously applying downward pressure on the handle. The sharpened blade will cut into the soil and turf.
5. Advance: Remove your foot and lift the edger slightly. Reposition the blade along the newly cut line, overlapping slightly with the previous cut to ensure a continuous, clean edge.
6. Repeat: Continue this process along the entire length of the desired edge. For curved edges, make smaller, overlapping cuts to maintain the desired shape.
7. Remove Excess: Once the edge is cut, use the edger or a spade to remove any loose soil or grass clippings from the newly defined border.

Figure 3: Proper foot placement on the large platform for maximum leverage and cutting power.

4. Maintenance

Proper maintenance will extend the life of your Fiskars Steel Edger and ensure optimal performance.

• Cleaning: After each use, remove any soil, grass, or debris from the blade and shaft. The powder-coated steel is easy to clean; simply wipe it down with a damp cloth.
• Drying: Ensure the tool is completely dry before storing to prevent rust, despite its rust-resistant coating.
• Sharpening: Periodically check the blade for sharpness. A dull blade will make edging more difficult and less effective. Sharpen the blade as needed using a suitable sharpening tool (not included).
• Storage: Store the edger in a dry, protected area, away from direct sunlight and moisture. Hang it if possible to keep the blade off the ground.

5. Troubleshooting

Most issues with a manual edger are related to technique or maintenance. Here are some common scenarios and solutions:

Issue: Edger is difficult to push into the ground.

• Solution 1: Check blade sharpness. A dull blade will not cut efficiently. Sharpen if necessary.
• Solution 2: Ensure adequate downward pressure. Use your body weight on the foot platform.
• Solution 3: Moisten dry, hard soil. Watering the area a few hours before edging can significantly ease the process.

Issue: Uneven or jagged edges.

• Solution 1: Maintain a consistent line. Use a string line or a straight board as a guide for straight edges.
• Solution 2: Overlap cuts slightly. This ensures a continuous and smooth line.
• Solution 3: Ensure the blade is clean. Debris can interfere with a clean cut.

6. Specifications

7. Warranty and Support

Lifetime Warranty:

Fiskars tools are designed for longevity and guaranteed to maintain exceptional performance season after season. This product includes a Lifetime Warranty. For full details and to register your product, please visit the official Fiskars website: Fiskars.com/USwarranty.

Customer Support:

For any questions, concerns, or assistance with your Fiskars 38.5" Steel Edger, please contact Fiskars customer support through their official website or the contact information provided in your product packaging.