Metal Earth White House 3D Metal Model Kit

Introduction

This instruction manual provides detailed guidance for assembling your Metal Earth White House 3D Metal Model Kit. This kit allows you to construct a highly detailed replica of the White House using precision-etched metal sheets. No glue or solder is required for assembly.

The kit is designed for hobbyists aged 14 and up. Please read all instructions carefully before beginning assembly.

Safety Information

Warning: Contains small parts and sharp edges. Use caution, especially around young children.

Always handle the metal sheets and individual pieces with care to avoid cuts. Keep small parts away from children to prevent choking hazards.

Tools Required

While no glue or solder is needed, certain tools are highly recommended for a smoother assembly process:

• Clippers: For cleanly detaching pieces from the metal sheets.
• Needle Nose Pliers: Essential for bending and twisting connection tabs accurately.
• Tweezers: Useful for handling very small parts and making precise adjustments.

Image: Recommended tools for assembly.

Assembly Instructions

Follow these steps carefully to assemble your White House model. Refer to the included diagrams for visual guidance.

1. Detach Pieces: Carefully clip each piece from the metal sheets. Use clippers for a clean break, avoiding tearing or bending the pieces.


Image: Overview of the four main assembly steps.

2. Fold Pieces: Gently fold the metal pieces along the etched lines as indicated in the instructions. Use flat nose pliers for crisp, accurate bends.
3. Connect Tabs and Holes: Align the tabs on one piece with the corresponding slots (holes) on another piece. Carefully insert the tabs.
4. Secure Connections: Once tabs are inserted, bend or twist them to secure the connection. Needle nose pliers are ideal for this step to ensure a tight and stable fit.

Image: Demonstrates connecting pieces without glue.

The White House model consists of 2 metal sheets and has an easy difficulty level. The assembled size is approximately 2.93 x 2.54 x 2.42 inches.

Image: Assembled model dimensions.

For a 360-degree view of the completed model, visit: http://www.metalearth.com/360/MMS032

Troubleshooting

• Difficulty Detaching Pieces: If a piece is hard to detach, use clippers to carefully snip the connection points. Avoid forcing or bending the sheet excessively.
• Tabs Not Fitting: Ensure the tabs are straight and not bent. Gently use tweezers or needle nose pliers to straighten them if necessary.
• Broken Piece: If a piece breaks, especially a tab, you may attempt to use a small amount of super glue for repair. However, this is not the intended assembly method and may affect the model's appearance.
• Model Instability: Ensure all tabs are securely bent or twisted. Loose connections can lead to an unstable model. Re-check connections for tightness.

Specifications

Warranty and Support

For information regarding product warranty or support, please visit the official Metal Earth store or contact the manufacturer, Fascinations, directly.

Metal Earth Store: Metal Earth Amazon Store