BLAUPUNKT GTx 693 DE

Blaupunkt GTx 693 DE 6x9-Inch Triaxial Speaker System User Manual

Model: GTx 693 DE (1 061 210 460 001)

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Blaupunkt GTx 693 DE 6x9-Inch Triaxial Speaker System. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage.

Safety Information

  • Always disconnect the vehicle's battery before beginning any electrical installation.
  • Ensure all wiring is properly insulated to prevent short circuits.
  • Mount speakers securely to prevent them from becoming loose during vehicle operation.
  • Avoid installing speakers in locations where they may be exposed to water or excessive moisture, as the product is not waterproof.
  • Consult a professional installer if you are unsure about any part of the installation process.

Package Contents

Verify that all items are present in the package:

  • Blaupunkt GTx 693 DE 6x9-Inch Triaxial Speakers (2 units)
  • Speaker Grilles (2 units)
  • Mounting Hardware (screws, clips)
  • User Manual (this document)
Blaupunkt GTx 693 DE speaker showing the cone, midrange, and tweeter without the protective grille.

Image 1: Blaupunkt GTx 693 DE speaker showing the cone, midrange, and tweeter without the protective grille.

Setup and Installation

Proper installation is crucial for optimal performance. Follow these steps carefully:

  1. Preparation:
    • Disconnect the negative terminal of your vehicle's battery.
    • Remove existing speakers or prepare the mounting location. Ensure sufficient mounting depth (73mm) and diameter (234.5mm x 165mm).
  2. Wiring:
    • Connect the speaker wires from your car's audio system to the terminals on the Blaupunkt GTx 693 DE speakers. Pay attention to polarity: positive (+) to positive and negative (-) to negative. Incorrect wiring can lead to poor sound quality.
    • Ensure all connections are secure and insulated to prevent short circuits.
  3. Mounting:
    • Place the speaker into the prepared opening.
    • Secure the speaker using the provided mounting hardware. Do not overtighten screws.
    • Attach the protective speaker grille over the speaker, if desired.
  4. Final Steps:
    • Reconnect the vehicle's battery.
    • Test the speakers with your car's audio system.
Blaupunkt GTx 693 DE speaker with the black protective grille installed.

Image 2: Blaupunkt GTx 693 DE speaker with the black protective grille installed.

Operating Instructions

Once installed, the Blaupunkt GTx 693 DE speakers operate as part of your vehicle's audio system. No specific controls are present on the speakers themselves.

  • Audio Source: Play audio through your car's head unit or connected media device.
  • Volume Control: Adjust the volume using your car's head unit controls. Avoid excessively high volumes for prolonged periods to prevent speaker damage and hearing loss.
  • Audio Settings: Utilize your head unit's equalizer and balance/fader settings to optimize sound quality for your vehicle's interior.
  • Break-in Period: New speakers may require a "break-in" period of several hours of moderate use to achieve their full sound potential. During this time, avoid playing audio at maximum volume.

Maintenance

The Blaupunkt GTx 693 DE speakers require minimal maintenance:

  • Cleaning: Use a soft, dry cloth to gently wipe dust from the speaker grilles and cones. Do not use harsh chemicals or abrasive cleaners.
  • Inspection: Periodically check speaker connections for tightness and ensure no wires are frayed or exposed.
  • Environmental Protection: While designed for automotive use, avoid direct exposure to extreme temperatures, excessive moisture, or direct sunlight for extended periods.

Troubleshooting

ProblemPossible CauseSolution
No sound from speakers
  • Loose or incorrect wiring
  • Head unit not powered on or muted
  • Blown fuse in head unit or vehicle
  • Check all speaker connections for proper polarity and tightness.
  • Ensure head unit is on and volume is up, not muted.
  • Inspect vehicle and head unit fuses.
Distorted or poor sound quality
  • Incorrect wiring polarity
  • Volume too high
  • Improper equalizer settings
  • Speaker damage
  • Verify speaker wire polarity.
  • Reduce volume level.
  • Adjust head unit equalizer settings.
  • Inspect speakers for visible damage.
One speaker not working
  • Loose connection to that specific speaker
  • Balance/fader setting incorrect
  • Damaged speaker
  • Check wiring for the non-working speaker.
  • Adjust balance/fader settings on your head unit.
  • If still no sound, the speaker may be damaged and require replacement.

Specifications

Speaker TypeTriaxial Speaker System
Speaker Size6 x 9 Inches (234.5mm x 165mm)
Peak Power Handling260 Watts
RMS Power Handling55 Watts
Impedance4 Ohms
Frequency Response40 - 22,000 Hz
Sensitivity92 dB
Mounting Depth73 mm
Cone MaterialInjected PP
Surround MaterialRubber
MidrangeMylar Dome with Neodymium Magnet
TweeterPEI Dome
Special FeaturesEXP Pole Core Technology, Additional Voice Coil Ventilation
Model Number1 061 210 460 001
Item Weight6 Pounds

Warranty and Support

Warranty: This Blaupunkt GTx 693 DE speaker system comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, abuse, accidents, or unauthorized modifications.

For warranty claims or technical support, please contact Blaupunkt customer service. Refer to the official Blaupunkt website or your purchase documentation for contact details.

© 2023 Blaupunkt. All rights reserved. Information in this manual is subject to change without notice.

Related Documents - GTx 693 DE

Preview Blaupunkt Tx 369.2 3-Way Triaxial Speaker User Manual
User manual for the Blaupunkt Tx 369.2 3-way triaxial speaker system, detailing specifications, features, and installation information for these 6"x9" speakers.
Preview Blaupunkt GTx 1xxx Series 2-Way Coaxial Speakers: Operating and Installation Guide
Comprehensive guide for Blaupunkt GTx 1xxx Series 2-way coaxial car speakers, covering installation, specifications, safety, and troubleshooting for models GTx 1352, GTx 1402, GTx 1662, and GTx 1692.
Preview Blaupunkt GTb 8200 A Active Subwoofer User Manual
Installation, connection, and operation guide for the Blaupunkt GTb 8200 A active subwoofer. Includes safety instructions, technical details, and audio input information.
Preview Blaupunkt GTX 1662 CHN & GTX 1662 HN: Honda Speaker Upgrade Manual
Operating and installation instructions for Blaupunkt GTX 1662 CHN 2-way component speakers and GTX 1662 HN 2-way coaxial speakers, designed for Honda vehicles. Includes specifications, safety notes, installation guidance, and troubleshooting.
Preview Blaupunkt BP RSE AD 10.6 (11.6") Android Touchscreen Rear Seat Entertainment System - User Manual
Comprehensive user manual for the Blaupunkt BP RSE AD 10.6 (11.6") Android Touchscreen Rear Seat Entertainment system, covering specifications, installation, setup, troubleshooting, and important information.
Preview Blaupunkt Blue Magic XLf 200 A Active Subwoofer User Manual
Comprehensive user manual for the Blaupunkt Blue Magic XLf 200 A active subwoofer, covering installation, connection, settings, and technical specifications.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.