Sioux Chief 696-G2001WF Washing Machine Outlet Box User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Sioux Chief 696-G2001WF Washing Machine Outlet Box. This product is designed to provide a secure and accessible connection point for washing machine water supply lines, integrating hot and cold water valves within a recessed box for a clean installation.

Please read all instructions carefully before beginning installation to ensure proper function and safety.

2. Safety Information

• Always shut off the main water supply before beginning any plumbing work.
• Wear appropriate personal protective equipment (PPE), such as safety glasses and gloves.
• Ensure all connections are secure and leak-free before restoring water pressure.
• If you are unsure about any part of the installation process, consult a qualified plumber.
• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

3. Components

The Sioux Chief 696-G2001WF Washing Machine Outlet Box typically includes the following components:

• Washing Machine Outlet Box (recessed housing)
• Integrated Hot and Cold Water Valves (with PEX crimp connections)
• Faceplate/Trim Ring
• Mounting Rail (for secure installation between studs)

This image displays the Sioux Chief 696-G2001WF washing machine outlet box. It features a white plastic housing with two integrated chrome-plated valves for hot (red indicator) and cold (blue indicator) water supply. Below the valves are PEX crimp connections. A white trim plate is shown above the box, and a metal mounting rail is visible at the bottom of the image.

4. Setup and Installation

Follow these steps for proper installation of the washing machine outlet box:

1. Prepare the Installation Location: Identify the desired location for the outlet box, typically between wall studs. Ensure there is sufficient space for the box and plumbing connections.
2. Cut the Opening: Mark and cut an opening in the drywall or wallboard to accommodate the recessed box. Refer to the product dimensions for precise measurements.
3. Mount the Box:
   • Attach the provided mounting rail to the wall studs using appropriate fasteners (not included).
   • Secure the outlet box to the mounting rail. The box is designed to sit flush with the finished wall surface.
4. Connect Water Supply Lines:
   • Connect the hot and cold water supply lines to the respective PEX crimp connections on the valves. Ensure proper crimping for a watertight seal.
   • Verify that the hot water line connects to the valve with the red indicator and the cold water line to the valve with the blue indicator.
5. Connect Drain Line (if applicable): If the box includes a drain opening, connect the washing machine drain hose to it. Ensure a secure connection to prevent leaks.
6. Install Faceplate: Once all plumbing connections are made and tested, snap or screw the faceplate/trim ring onto the outlet box for a finished appearance.
7. Restore Water Supply: Slowly turn on the main water supply and check all connections for leaks. Tighten any leaking connections immediately.

5. Operating Instructions

The valves in the Sioux Chief 696-G2001WF outlet box are designed for simple operation:

• To Open (Water Flow): Turn the valve handles counter-clockwise until they are fully open. This allows water to flow to the washing machine.
• To Close (Shut Off Water): Turn the valve handles clockwise until they are fully closed. This shuts off the water supply to the washing machine. It is recommended to close these valves when the washing machine is not in use for extended periods, such as during vacations, to prevent potential water damage from hose failures.

6. Maintenance

The Sioux Chief 696-G2001WF is designed for low maintenance. Regular checks can help ensure its longevity and prevent issues:

• Periodic Inspection: Periodically inspect the outlet box and connections for any signs of leaks, corrosion, or damage.
• Valve Operation: Occasionally operate the valves (open and close them) to ensure they function smoothly and do not seize up.
• Cleaning: Clean the exterior of the box and faceplate with a mild, non-abrasive cleaner and a soft cloth. Avoid harsh chemicals that could damage the finish.

7. Troubleshooting

Here are some common issues and their potential solutions:

• No Water Flow to Washing Machine:
  • Ensure the hot and cold water valves in the outlet box are fully open.
  • Check if the main water supply to the house is on.
  • Inspect washing machine hoses for kinks or blockages.
• Leaks from Connections:
  • Immediately shut off the main water supply.
  • Inspect the PEX crimp connections for proper installation. Re-crimp if necessary, or consult a plumber.
  • Check the connections between the washing machine hoses and the outlet box valves. Ensure they are tight and have intact rubber washers.
• Valve Handles Stiff or Hard to Turn:
  • Mineral buildup can sometimes cause stiffness. Repeatedly opening and closing the valve may help.
  • If the issue persists, the valve may need to be replaced. Consult a professional.

8. Specifications

9. Warranty and Support

For specific warranty information regarding the Sioux Chief 696-G2001WF Washing Machine Outlet Box, please refer to the documentation provided at the time of purchase or contact Sioux Chief Manufacturing directly. Warranty terms can vary based on region and retailer.

For technical support or further assistance, please contact Sioux Chief Manufacturing customer service or the authorized dealer from whom the product was purchased.

Note: Product specifications and warranty terms are subject to change by the manufacturer without prior notice.