ARLINGTON 60VC-1 Low Profile IN-AND-OUT Weather Proof Outlet Cover

Introduction

The Arlington 60VC-1 Low Profile IN-AND-OUT Weather Proof Outlet Cover is designed to provide a secure, weather-resistant enclosure for electrical outlets in both new and existing construction. Its innovative design allows it to remain low-profile when not in use and extend quickly to accommodate a plug, creating a sealed environment that protects against weather elements and pests. This manual provides essential information for the safe installation, operation, and maintenance of your outlet cover.

Safety Information

WARNING: Risk of electric shock. Always disconnect power at the circuit breaker or fuse box before installing or servicing electrical devices.

• Ensure all local electrical codes are followed during installation.
• If you are unsure about any part of the installation process, consult a qualified electrician.
• Do not use this product if it appears damaged.
• This cover is designed for vertical installation only.

Package Contents

Verify that all components are present before beginning installation:

• One (1) Arlington 60VC-1 Low Profile IN-AND-OUT Weather Proof Outlet Cover with Wall Plate
• Mounting Screws (typically included with the outlet cover)

Setup and Installation

Follow these steps for proper installation of the Arlington 60VC-1 outlet cover:

1. Disconnect Power: Locate the circuit breaker or fuse that controls the power to the outlet where you will install the cover. Turn off the power completely. Verify power is off using a voltage tester.
2. Remove Existing Cover (if applicable): Carefully remove any existing outlet cover or weather-proof enclosure.
3. Position the Cover: Place the Arlington 60VC-1 cover over the electrical outlet and the existing electrical box or opening. Ensure it is oriented vertically as intended. The cover is designed to fit over all standard boxes or openings.
4. Secure the Cover: Use the provided mounting screws to firmly attach the cover to the electrical box. Do not overtighten.
5. Restore Power: Once the cover is securely installed, restore power at the circuit breaker or fuse box.

This image shows the Arlington 60VC-1 outlet cover in its closed, low-profile position, highlighting its clear, vertical design. This is how the cover appears when installed and not in use.

Operating Instructions

The 60VC-1 cover is designed for ease of use and protection:

1. To Use the Outlet: When you need to plug in an electrical cord, gently pull the front cover outwards. The cover will extend, providing ample space for the plug and creating a sealed, weatherproof enclosure around the connection.
2. To Close the Cover: Once you have finished using the outlet, unplug the electrical cord. Gently push the front cover back into its original position until it sits flush with the wall plate. This returns the cover to its low-profile, non-use state.

Maintenance

The Arlington 60VC-1 requires minimal maintenance:

• Periodically inspect the cover for any signs of damage or wear.
• Clean the cover with a soft, damp cloth and mild soap if necessary. Avoid abrasive cleaners or solvents.
• Ensure the cover's sealing mechanism is free from debris to maintain its weatherproof integrity.

Troubleshooting

If you encounter issues with your outlet cover, consider the following:

• Cover does not close properly: Check for any obstructions, such as debris or misaligned wiring, preventing the cover from fully retracting.
• Water inside the cover: Ensure the cover was installed correctly and that all mounting screws are tightened appropriately to create a proper seal. Inspect the surrounding wall surface for any gaps that might allow water ingress.
• Difficulty extending the cover: Check for any foreign objects or excessive dirt that might be hindering the movement of the cover.

Specifications

Warranty and Support

For specific warranty information or technical assistance regarding your Arlington 60VC-1 Low Profile IN-AND-OUT Weather Proof Outlet Cover, please contact Arlington Industries Inc. customer service directly. Refer to the product packaging or the manufacturer's official website for contact details.