Sunbeam Microplush Heated Throw Blanket (Model TSM8TS-R608-25B00) - Instruction Manual

Introduction

Thank you for choosing the Sunbeam Microplush Heated Throw Blanket. This manual provides essential information for the safe and efficient use of your new heated throw. Designed for deluxe softness and consistent warmth, this throw features a Thermofine warming system, 3 heat settings, and a 3-hour auto-off function for your comfort and peace of mind.

Important Safety Instructions

READ ALL INSTRUCTIONS BEFORE USING THIS HEATED THROW. FAILURE TO DO SO MAY RESULT IN FIRE, ELECTRIC SHOCK, OR INJURY.

• Do not use with an infant, child, incapacitated person, or anyone insensitive to heat.
• Never use the heated throw if it is wet.
• Avoid folding, bunching, or crushing the heated throw during use. This can cause overheating.
• Do not use pins or other metallic objects with this heated throw. They may damage electrical wiring.
• Keep the controller away from open windows or heat sources.
• Do not dry clean this heated throw. Dry cleaning solvents may damage the insulation of the heating element.
• Always unplug the heated throw from the electrical outlet when not in use.
• Do not use this heated throw with pets.
• Ensure the power cord is not pinched or routed in a way that could cause damage.

Setup

1. Unpack: Carefully remove the heated throw from its packaging. Retain packaging for storage if desired.
2. Inspect: Check the heated throw and power cord for any signs of damage. Do not use if damaged.
3. Connect Controller: Locate the connector on the heated throw and firmly plug in the controller cord. Ensure a secure connection.
4. Plug In: Plug the 6-foot power cord into a 120V AC electrical outlet. Ensure the outlet is easily accessible.
5. Placement: Spread the heated throw evenly on your sofa, chair, or wherever you desire warmth. Avoid placing it under heavy objects or folding it tightly. This throw is designed for personal use on top of you, not as an underblanket on a bed.

Image: The controller for the Sunbeam Heated Throw, featuring buttons for 3 heat settings (High, Med, Low) and a 3-hour auto-off function. The controller is black with white text and indicator lights.

Operating Instructions

1. Power On: Press the power button on the PrimeStyle lighted controller to turn on the heated throw.
2. Select Heat Setting: Use the heat setting buttons (High, Med, Low) to choose your desired warmth level. The Thermofine warming system will sense and adjust to deliver consistent heat.
3. Auto-Off Feature: The heated throw is equipped with a 3-hour auto-off function for safety and energy conservation. It will automatically turn off after 3 hours of continuous use.
4. Power Off: To turn off the heated throw manually, press the power button until all indicator lights are off. Unplug the throw from the wall outlet when not in use.

Image: A graphic illustrating "ThermoFine® technology auto-adjusts for consistent heat" on a red background.

Maintenance and Care

Proper care ensures the longevity and performance of your heated throw. Always detach the controller before washing.

• Machine Washable: Disconnect the controller from the heated throw. Machine wash on a gentle cycle in cold water with mild detergent.
• Dryer Safe: Tumble dry on low heat. Ensure the throw is completely dry before reconnecting the controller and using it. Do not iron.
• Storage: When not in use, store the heated throw in a cool, dry place. Avoid folding it tightly or placing heavy objects on it.

Image: A person loading a heated blanket into a front-loading washing machine, with text indicating "Machine washable".

Troubleshooting

If your heated throw is not operating correctly, please refer to the following common issues:

• No Heat/Controller Not Working:
  • Ensure the power cord is securely plugged into a working electrical outlet.
  • Verify the controller cord is firmly connected to the heated throw.
  • Try plugging the throw into a different outlet to rule out an outlet issue.
  • If the controller has a reset function, follow the instructions to reset it.
• Uneven Heating:
  • Ensure the throw is spread out evenly and not folded or bunched.
  • The Thermofine system is designed for consistent warmth, but extreme bunching can affect distribution.

If issues persist, please contact Sunbeam customer support.

Specifications

Image: A bedding size guide showing various blanket, mattress pad, and throw sizes. The Standard Throw size is listed as 50" x 60".

Warranty and Support

For warranty information, please refer to the documentation included with your product packaging or visit the official Sunbeam website. For customer support, product registration, or to inquire about replacement parts, please visit the Sunbeam Store on Amazon or contact their customer service directly.

Product Videos