Introduction
Thank you for choosing Skullcandy Uprock On-Ear Headphones. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your headphones to ensure optimal performance and longevity. Please read these instructions carefully before use.
Product Overview
The Skullcandy Uprock On-Ear Headphones are designed for a comfortable listening experience with clear audio. Key features include a lightweight ergonomic fit, dual-layer ear cups, and a tangle-free flat cable with integrated track control.
Components:
- On-Ear Earcups: Designed for comfort and sound isolation.
- Adjustable Headband: Allows for a customized and secure fit.
- 3.5mm Audio Cable: Wired connection for universal compatibility.
- In-line Remote with Microphone: For track control and hands-free communication.
This image displays the right side of the Skullcandy Uprock On-Ear Headphones. The earcup is black with a smooth finish, and the headband is also black, featuring the Skullcandy skull logo in silver. The cable extends from the bottom of the earcup.
Setup
- Connect to Audio Source: Insert the 3.5mm audio jack into the corresponding port on your smartphone, tablet, computer, or other compatible audio device. Ensure the connection is secure.
- Adjust Fit: Place the headphones over your ears. Adjust the headband by sliding the earcups up or down until they rest comfortably and securely on your ears. The dual-layer ear cups are designed for an ergonomic fit.
Operating Instructions
Audio Playback:
- Once connected, play audio from your device. Adjust the volume using your device's volume controls.
Using the In-line Remote (Track Control):
The in-line remote allows for convenient control of your music and calls without needing to access your device directly. Functionality may vary slightly depending on your device and operating system.
- Play/Pause: Press the center button once to play or pause audio.
- Next Track: Press the center button twice quickly to skip to the next track.
- Previous Track: Press the center button three times quickly to go back to the beginning of the current track or to the previous track.
- Answer/End Call: Press the center button once to answer an incoming call or end an active call.
- Reject Call: Press and hold the center button for approximately two seconds to reject an incoming call.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the earcups and headband. Do not use liquid cleaners or solvents. Ensure no moisture enters the speaker grilles.
- Storage: When not in use, store the headphones in a clean, dry place away from extreme temperatures and direct sunlight. Avoid tangling the cable by coiling it neatly.
- Cable Care: The TPE flat cable is designed to be tangle-free. Avoid sharp bends or excessive pulling on the cable, especially near the connectors, to prevent damage.
Troubleshooting
| Problem | Solution |
|---|---|
| No sound or low volume |
|
| Sound only in one earcup |
|
| Microphone not working |
|
Specifications
- Model: Uprock
- Connectivity: Wired (3.5 mm Jack)
- Driver Diameter: 40 mm
- Ear Placement: On-Ear
- Cable Type: Tangle-Free TPE Flat Cable
- Control Type: In-line Remote with Microphone
- Compatible Devices: Most Smartphones and devices with a 3.5mm audio jack
- Product Dimensions: 6 x 3.6 x 8 inches
- Item Weight: 11.2 ounces
- Material: Thermoplastic Elastomer (TPE)
Warranty and Support
For detailed warranty information, product registration, and technical support, please refer to the documentation included with your purchase or visit the official Skullcandy website. You can typically find support resources, FAQs, and contact information on their support pages.
Official Support Link: www.skullcandy.com/support
