1. Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your Bulova Men's Classic 3-Hand Quartz Watch, Model 96A133. This timepiece features a classic design with Roman numeral markers, a 41mm stainless steel case, and a black leather strap, offering both elegance and reliable timekeeping.
Figure 1: Front view of the Bulova Men's Classic 3-Hand Quartz Watch.
2. Setup
2.1 Unboxing and Initial Inspection
Carefully remove the watch from its packaging. Inspect the watch for any visible damage or defects. Ensure all protective films are removed from the crystal and case back before use.
Figure 2: The Bulova watch packaging box.
2.2 Setting the Time
- Gently pull the crown (the small knob on the side of the watch case) out to its outermost position.
- Turn the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
- Once the time is set, push the crown back into its original position against the watch case. This will start the watch movement.
2.3 Adjusting the Leather Strap
The watch features a black leather strap with a classic buckle closure. To adjust the fit, simply thread the strap through the buckle and secure the pin into the desired hole. Ensure the fit is snug but comfortable, allowing for proper blood circulation.
Figure 3: The Bulova watch worn on a wrist, showcasing the leather strap.
3. Operating the Watch
Your Bulova watch is equipped with a reliable 3-hand quartz movement, providing accurate timekeeping. Once the time is set, the watch will continuously display the current hour, minute, and second.
Video 1: A brief overview of the Bulova Men's 96A133 Dress Watch, demonstrating its appearance and movement.
4. Maintenance
4.1 Water Resistance
This watch is water resistant up to 30 meters (3 ATM). This means it is suitable for everyday use and can withstand splashes or brief immersion in water. However, it is not recommended for swimming, showering, or diving. Avoid operating the crown while the watch is wet.
4.2 Cleaning
To maintain the appearance of your watch, wipe the case and crystal with a soft, dry cloth. For the leather strap, avoid prolonged exposure to water, direct sunlight, and harsh chemicals, as these can cause damage or discoloration. Clean the leather strap with a damp cloth and mild soap if necessary, then dry thoroughly.
4.3 Battery Replacement
The watch is powered by one Lithium Metal battery (included). When the watch stops or the second hand begins to skip, it indicates that the battery needs replacement. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and water resistance.
5. Troubleshooting
5.1 Watch Not Running
- Ensure the crown is fully pushed in against the watch case.
- If the watch still does not run, the battery may need to be replaced. Refer to Section 4.3.
5.2 Incorrect Time Display
- Check if the crown is accidentally pulled out. Push it back in if it is.
- Reset the time according to the instructions in Section 2.2.
- If the watch consistently loses or gains time significantly, it may require servicing.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | 96A133 |
| Movement | Quartz, 3-Hand |
| Case Material | Stainless Steel |
| Case Diameter | 41mm |
| Crystal Material | Mineral Crystal |
| Strap Material | Black Leather |
| Water Resistance | 30 Meters (3 ATM) |
| Battery Type | 1 Lithium Metal (included) |
| Product Dimensions | 4.33 x 3.94 x 3.54 inches; 1.41 ounces |
7. Warranty and Support
Your Bulova watch comes with a 3-Year Limited Warranty. This warranty covers manufacturing defects under normal use. For detailed terms and conditions, please refer to the warranty card included with your purchase or visit the official Bulova website.
For technical support, service, or warranty claims, please contact Bulova customer service or an authorized Bulova service center. Do not attempt to open or repair the watch yourself, as this may void the warranty.
