Securifi Almond Touchscreen Wireless Router/Range Extender Instruction Manual

Introduction

This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Securifi Almond Touchscreen Wireless Router/Range Extender. Please read this manual carefully to ensure proper use and optimal performance of your device.

Key Features

• Touchscreen Interface: Intuitive setup and management without a PC.
• Multi-Purpose Usage: Functions as a primary Wi-Fi Router, Range Extender, Access Point, or Wireless Bridge.
• Universal Compatibility: Works with any existing router (e.g., Netgear, Linksys, Belkin).
• Broad Device Support: Compatible with PC, Windows, Mac, Linux, iPhone, iPad, Android, and Xbox.
• Home Automation Hub: Supports Zigbee and Z-Wave sensors for smart home integration.

Setup

Initial Power-On and Wizard

Upon first power-on, the Almond device will guide you through a setup wizard using its touchscreen. You can choose to set it up as a Router or a Range Extender.

Image: Securifi Almond Router displaying the setup wizard on its touchscreen, prompting the user to choose between Router or Range Extender mode.

Connecting as a Range Extender

If you choose to use the Almond as a Range Extender, follow the on-screen prompts to connect it to your existing Wi-Fi network. The device will scan for available networks and allow you to select yours.

Image: The Securifi Almond Router's home screen, showing icons for Internet Settings, Wizard, Wireless Settings, Range Extender, Add Sensor, Status, and More.

Operating Instructions

Touchscreen Navigation

The Almond device features a 2.8-inch touchscreen for easy navigation. Use the provided stylus or your finger to interact with the interface. The main screen provides access to various functions:

• Internet Settings: Configure your internet connection.
• Wireless Settings: Manage your 2.4GHz and 5GHz Wi-Fi networks, including SSID, password, and guest network options.
• Range Extender: Access settings specific to range extender mode.
• Add Sensor: Integrate smart home sensors (Zigbee, Z-Wave, Hue).
• Status: View network status, connected devices, and IP address.
• More: Access additional settings like software update, screen settings, and diagnostics.

Image: A close-up view of the Almond's touchscreen, showing the main menu with icons for Internet Settings, Wizard, Wireless Settings, Range Extender, Add Sensor, Status, and More. A stylus is shown interacting with the screen.

Wireless Network Configuration

From the Wireless Settings menu, you can:

• Change the SSID (network name) for both 2.4GHz and 5GHz bands.
• Update your Wi-Fi password.
• Enable or disable a guest network.
• Access advanced settings to show/hide SSIDs or adjust channel width.

Image: The Almond's touchscreen showing a virtual keyboard, used for entering network names or passwords.

Home Automation Integration

The Almond device can act as a hub for smart home devices. Navigate to Add Sensor to pair compatible Zigbee or Z-Wave sensors, such as light switches or thermostats. This allows you to monitor and control these devices through the Almond's interface or a connected mobile application.

Maintenance

Software Updates

Regularly check for software updates to ensure your Almond device has the latest features and security enhancements. Access this option through the More > Settings > Software Update menu on the touchscreen.

Screen Settings

Customize screen timeout and set a screen lock PIN for added security via the More > Settings > Screen Settings menu.

Troubleshooting

Resolving Red Wi-Fi Signal on Range Extender

If your Almond Range Extender displays a red Wi-Fi signal, indicating a connection issue, follow these steps:

1. Attempt Reconnect: On the Almond's touchscreen, navigate to the "Range Extender" section and tap "Reconnect". Wait for the device to attempt re-establishing the connection.
2. Reset Main Router: If reconnecting the Almond does not resolve the issue, you may need to reset your main router.
   • Unplug the power cable from your main router.
   • Wait for at least 10-15 seconds.
   • Plug the power cable back into your main router.
   • Allow the main router to fully boot up and establish its internet connection (all indicator lights should turn green). This may take several minutes.
3. Reconnect Almond After Router Reset: Once your main router is fully operational, return to the Almond Range Extender.
   • On the Almond's touchscreen, tap "Reconnect" in the "Range Extender" section.
   • Observe if the Wi-Fi signal on the Almond turns green, indicating a successful connection.
4. Power Cycle Almond: If the issue persists after resetting the main router and attempting to reconnect the Almond, perform a power cycle on the Almond device itself.
   • Unplug the power cable from the Almond Range Extender.
   • Wait for at least 10-15 seconds.
   • Plug the power cable back into the Almond.
   • Allow the Almond to boot up completely. Once it reaches the home screen, navigate to the "Range Extender" section and check the Wi-Fi signal status.

Diagnostics

For further troubleshooting, the Almond device includes a diagnostics tool. Access it via More > Diagnostics to identify any cloud-related issues or other system problems.

Specifications

Warranty and Support

For warranty information and technical support, please refer to the official Securifi website or contact their customer service. Protection plans are available for extended coverage.

• 3-Year Protection Plan (ASIN: B07PBD7RDM)
• 4-Year Protection Plan (ASIN: B07PBZ1P2K)
• Complete Protect (Monthly plan, ASIN: B07RZ3LSHM)

For additional resources and community support, you may visit the Securifi Store on Amazon.