Kidde 001004

Instruction Manual

For the Kidde AccessPoint Portable KeySafe

Product Overview

The Kidde AccessPoint Portable KeySafe, model 001004, is a durable and portable solution designed for secure key storage. This brass-constructed key safe features a 4-digit mechanical combination lock, providing reliable access control for your keys. Its compact design allows for versatile placement, including wall mounting.

Kidde AccessPoint Portable KeySafe with keys inside, showing the combination keypad.

Image: The Kidde AccessPoint Portable KeySafe, model 001004, shown with its combination keypad open and keys stored inside. The safe is a light gray color, and the keypad features numbered buttons from 0-9, an "OPEN" button, and a "CLEAR" button, along with a sliding mechanism.

Safety Information

  • Ensure the combination is kept confidential and shared only with authorized individuals.
  • Do not store the combination inside the key safe.
  • This product is not water resistant. Avoid exposure to water or high humidity to prevent damage.
  • Periodically check the mounting hardware to ensure the safe remains securely attached if wall-mounted.

Package Contents

Verify that all items are present in the package:

  • 1 x Kidde AccessPoint Portable KeySafe (Model 001004)
  • Screws for mounting
  • Instruction Manual (this document)

Setup

Setting the Combination

  1. Open the key safe door. The safe is typically set to a default combination from the factory (refer to packaging or included quick start guide for default).
  2. Locate the reset lever or button inside the safe, usually on the back of the door mechanism.
  3. Move the reset lever to the "SET" position or press the reset button.
  4. Enter your desired 4-digit combination by pressing the corresponding number buttons.
  5. Move the reset lever back to the "NORMAL" or "LOCK" position, or release the reset button.
  6. Important: Test the new combination with the door open before closing it to ensure it works correctly.

Mounting the Key Safe (Optional)

The key safe can be wall-mounted for permanent installation.

  1. Choose a suitable location for mounting, ensuring it is a secure and stable surface.
  2. Open the key safe door to access the mounting holes on the back panel.
  3. Mark the drilling points on the wall using the key safe as a template.
  4. Drill pilot holes at the marked locations.
  5. Align the key safe with the pilot holes and secure it to the wall using the provided screws. Ensure it is firmly attached.

Operating Instructions

Opening the Key Safe

  1. Enter your 4-digit combination by pressing the corresponding number buttons.
  2. Press the "OPEN" button or slide the open lever (if applicable).
  3. The door will unlatch, allowing you to open the safe and access the keys.

Closing and Locking the Key Safe

  1. Place the keys securely inside the safe.
  2. Close the door firmly until it latches.
  3. To ensure it is locked, press the "CLEAR" button to reset the entered combination. The safe is now securely locked.

Maintenance

  • Clean the exterior of the key safe with a soft, damp cloth. Avoid abrasive cleaners or solvents.
  • Ensure the combination buttons and locking mechanism are free from dirt and debris.
  • Do not lubricate the internal mechanism unless specifically instructed by the manufacturer.
  • Store the key safe in a dry environment to prevent corrosion, as it is not water resistant.

Troubleshooting

ProblemPossible CauseSolution
Safe will not open with combination.Incorrect combination entered. Combination not fully reset after previous use.Ensure all previous entries are cleared by pressing the "CLEAR" button before entering the correct combination. Re-enter the combination carefully.
Door is stiff or difficult to close/open.Debris in mechanism. Misalignment.Inspect for any foreign objects obstructing the door or latch. Ensure the safe is mounted on a flat, stable surface if applicable.
Combination feels loose or unresponsive.Internal mechanism wear or damage.Contact customer support for assistance. Do not attempt to disassemble the locking mechanism.

Specifications

  • Model Number: 001004
  • Brand: Kidde
  • Product Dimensions: 2.5"D x 5.75"W x 8.75"H
  • Lock Type: Mechanical Code Lock (4-digit combination)
  • Color: Assorted, White, Box (referring to packaging/product variations)
  • Material: Brass
  • Special Feature: Portable
  • Mounting Type: Wall Mount
  • Item Weight: 1.42 Pounds
  • Water Resistance Level: Not Water Resistant
  • UPC: 090928010045
  • Manufacturer: KIDDE SAFETY

Warranty and Support

For warranty information or technical support, please contact Kidde customer service. Keep your purchase receipt as proof of purchase.

  • Visit the official Kidde website for the most current support contact information: www.kidde.com
  • Refer to the product packaging for specific warranty details applicable to your region.

© 2023 Kidde. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.