One For All OARH02B Two-Device Universal Remote Control User Manual

Introduction

The One For All OARH02B is a two-device universal remote control designed for simplified operation of your home entertainment devices, primarily televisions. Its oversized buttons make it ideal for users who prefer a straightforward interface, such as in public areas or for children and the elderly. This remote focuses on essential functions, streamlining control by omitting less frequently used features found on more complex remotes.

Product Overview

Image: Front view of the One For All OARH02B universal remote control. The remote is black with large, clearly labeled buttons. Key buttons visible include a red POWER button at the top, number pad (0-9), volume and channel controls, MUTE, PREV CH, SLEEP, MENU, and CLOSED CAPTIONING buttons. The "ONE FOR ALL" logo is at the bottom.

Key Features:

• Oversized Buttons: Designed for ease of use and visibility.
• Essential Functions: Includes Sleep, Mute, Menu, Input, Closed Captioning, and Previous Channel keys.
• Two-Device Control: Capable of controlling two different devices, typically a TV and another device like a cable box or satellite receiver.
• Battery Requirement: Uses two AAA batteries (not included).

Setup

1. Battery Installation

1. Locate the battery compartment on the back of the remote control.
2. Slide the battery cover downwards or in the direction indicated by an arrow to open it.
3. Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
4. Replace the battery cover by sliding it back into place until it clicks securely.

2. Programming the Remote

The OARH02B remote can be programmed to control your TV and one other device (e.g., SAT/CBL/DTC box) using a code search method.

1. Turn on the device you wish to program (e.g., your TV).
2. Press and hold the "CODE SEARCH" button (small black button near the top right). The red indicator light on the remote will turn on.
3. While holding "CODE SEARCH", press the device button you want to program (e.g., "TV" for television or "SAT CBL DTC" for satellite/cable/digital converter). Release both buttons. The red light will blink once and then stay on.
4. Point the remote at your device and repeatedly press the "POWER" button (red button at the top). Press it slowly, about once every second.
5. Stop pressing "POWER" immediately when your device turns off. This indicates the remote has found the correct code.
6. Test the remote: Try turning the device back on and testing other functions like volume and channel. If all functions work, the remote is programmed. If not, repeat the process from step 2.
7. To program the second device, repeat steps 1-5, selecting the other device button ("SAT CBL DTC" or "TV") in step 3.

Note: If the device does not respond after many presses, the remote may not be compatible with your specific model, or you may need to try a different programming method (not covered in this simplified manual).

Operating the Remote Control

Button Functions:

• POWER (Red Button): Turns the selected device on or off.
• TV: Selects the TV mode for controlling your television.
• SAT CBL DTC: Selects the Satellite, Cable, or Digital Converter mode for controlling your set-top box.
• Number Pad (0-9): Enters channel numbers directly.
• ENTER (Triangle): Confirms channel selection or menu options.
• INPUT (Minus Sign): Cycles through video input sources on your TV (e.g., HDMI 1, AV, Component).
• VOL (+/-): Increases or decreases the volume.
• CHAN (Up/Down Arrows): Changes channels up or down.
• MUTE: Silences the audio. Press again to restore sound.
• PREV CH: Returns to the previously viewed channel.
• SLEEP (ZZZ): Activates the sleep timer function on your TV (if supported).
• MENU: Opens the on-screen menu of the selected device.
• CLOSED CAPTIONING (CC): Toggles closed captions on or off.

Switching Between Devices:

To control a different device, simply press the corresponding device button (TV or SAT CBL DTC) at the top of the remote. The remote will then send commands to that selected device.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the remote. Do not use abrasive cleaners or solvents.
• Battery Replacement: Replace batteries when the remote's indicator light does not illuminate or when the remote becomes unresponsive. Always replace both batteries at the same time with new AAA alkaline batteries.
• Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage.

Troubleshooting

Specifications

• Model: OARH02B
• Brand: One For All
• Compatible Devices: Television, Satellite/Cable/DTC Box
• Max Number of Supported Devices: 2
• Batteries Required: 2 x AAA (not included)
• Product Dimensions: 25.4 x 2.54 x 9.53 cm (10 x 1 x 3.75 inches)
• Item Weight: 113.4 g (0.25 lbs)
• Maximum Range: 12.8 Meters (42 feet)
• Manufacturer: Audiovox Accessories Corporation

Warranty and Support

For information regarding product warranty, technical support, or to find additional programming codes, please refer to the official One For All website or contact their customer service. Specific warranty terms and support contact details are typically provided with the product packaging or on the manufacturer's official support channels.