JTS TM-929 Dynamic Microphone User Manual

Product Overview

The JTS TM-929 is a dynamic vocal microphone designed for various audio applications. It features a cardioid polar pattern, which helps to reduce sound pickup from the sides and rear, focusing on the sound source directly in front of the microphone. Its robust construction ensures durability for regular use.

Image: Front view of the JTS TM-929 Dynamic Microphone. This image displays the microphone's black body, silver grille, and the JTS logo with the TM-929 model number.

Key features include:

• Frequency Response: 50 - 15,000 Hz, suitable for vocal reproduction.
• Polar Pattern: Cardioid, for focused sound capture and feedback reduction.
• On/Off Switch: Integrated for convenient control during performances.
• Construction: Rugged metal windscreen and die-cast body for durability.
• Portability: Includes a hardshell carry case for protection and transport.

Setup

Follow these steps to set up your JTS TM-929 Dynamic Microphone:

1. Unpack the Microphone: Carefully remove the microphone and any included accessories from its packaging. The package typically includes the microphone itself.
2. Connect to an Amplifier: The TM-929 uses an XLR connector. Connect one end of a standard XLR cable (not included) to the XLR port at the base of the microphone.

Image: Angled view of the JTS TM-929 Dynamic Microphone, highlighting the XLR connector at the base. This view also shows the on/off switch on the microphone body.
3. Connect to Audio Equipment: Connect the other end of the XLR cable to the microphone input of your amplifier, mixer, or audio interface. Ensure the connection is secure.
4. Power Source: The microphone operates as a corded electric device, drawing power directly from the connected audio equipment's microphone input. No external power supply is required for the microphone itself.
5. Positioning: Place the microphone on a stand or hold it in a position suitable for your intended use, such as singing or karaoke.

Operating

Operating the JTS TM-929 is straightforward:

1. Power On/Off: The microphone features an integrated on/off switch located on its body. Slide the switch to the 'ON' position to activate the microphone and to the 'OFF' position when not in use.

Image: Top-down view of the JTS TM-929 Dynamic Microphone, clearly showing the on/off switch on the side of the microphone body.
2. Microphone Placement: Due to its cardioid (unidirectional) polar pattern, the microphone is most sensitive to sounds coming from directly in front of it. For optimal sound capture, ensure the microphone grille is pointed towards the sound source (e.g., your mouth for vocals).
3. Volume Control: Adjust the input gain or volume level on your connected amplifier or mixer to achieve the desired sound level without distortion.
4. Recommended Uses: This microphone is well-suited for applications such as karaoke and singing, providing clear vocal reproduction within its frequency response range of 50 Hz to 15,000 Hz.
5. Signal Quality: The microphone has a Signal-to-Noise Ratio of 75 dB, indicating good clarity for its class.

Maintenance

Proper maintenance will extend the life and performance of your JTS TM-929 microphone:

• Cleaning: Use a soft, dry cloth to wipe the microphone body. For the metal windscreen, a soft brush can be used to gently remove dust or debris. Avoid using liquid cleaners directly on the microphone, especially near the grille or switch.
• Storage: When not in use, store the microphone in its hardshell carry case to protect it from dust, moisture, and physical damage. Store in a cool, dry place.
• Handling: While the microphone features a rugged metal construction, avoid dropping it or subjecting it to harsh impacts, as this can damage internal components.
• Cable Care: Always grasp the connector, not the cable, when plugging or unplugging the XLR cable. Avoid kinking or tightly winding the cable.

Troubleshooting

If you encounter issues with your JTS TM-929 microphone, consider the following common troubleshooting steps:

• No Sound Output:
  • Ensure the microphone's on/off switch is in the 'ON' position.
  • Verify that the XLR cable is securely connected to both the microphone and the input device (amplifier/mixer).
  • Check the input gain or volume level on your amplifier/mixer. It might be set too low or muted.
  • Test the microphone with a different XLR cable if possible, to rule out a faulty cable.
  • Test the microphone with a different input device if available, to rule out an issue with the amplifier/mixer.
• Distorted or Unclear Sound:
  • Reduce the input gain or volume level on your amplifier/mixer. Overdriving the input can cause distortion.
  • Ensure the microphone is pointed directly at the sound source. Off-axis sound can sound thinner or less clear due to the cardioid pattern.
  • Check for any obstructions on the microphone grille.
  • Ensure the microphone is not too close to the sound source, which can cause proximity effect or clipping.
• Intermittent Sound:
  • Check all cable connections for looseness.
  • Inspect the XLR cable for any visible damage or kinks.
  • Ensure the microphone's on/off switch is not loose or faulty.

If these steps do not resolve the issue, contact the seller or manufacturer for further assistance.

Specifications

Warranty and Support

For information regarding the warranty of your JTS TM-929 Dynamic Microphone, please refer to the documentation provided at the time of purchase or contact the retailer from whom you purchased the product. Warranty terms and conditions may vary by region and seller.

For technical support, service, or further inquiries, please contact the JTS manufacturer directly or the authorized seller. Contact information can typically be found on the manufacturer's official website or on your purchase receipt.