Tascam CD-200BT Rackmount Professional CD Player with Bluetooth Wireless Instruction Manual

1. Introduction and Overview

The Tascam CD-200BT is a versatile rackmount professional CD player designed for various audio playback needs in professional environments. It supports CD-DA, WAV, MP3, and MP2 files, and features Bluetooth wireless connectivity for streaming audio from compatible devices. The unit is equipped with a high-quality CD drive and 10-second shockproof memory to prevent skipping.

Figure 1: Front view of the Tascam CD-200BT, showcasing its sleek rackmount design and display.

Key features include:

• Pair up to 8 audio transmitting Bluetooth devices for easy switching.
• Equipped with aptX Codec for high audio quality and stable transmissions.
• CD drive supports playback of CD-DA and WAV/MP3/MP2 files (Data CD).
• High-quality and dependable CD drive designed by TEAC.
• 10-second shockproof memory prevents skipping from vibration.
• Front screen displays the name of the device in use.
• Wireless remote controller included.

2. Setup

Before operating your Tascam CD-200BT, ensure proper setup:

1. Unpacking: Carefully remove the unit and all accessories from the packaging. Verify that all included components (CD Player, wireless remote controller) are present.
2. Power Connection: Connect the power cable to the unit and a suitable power outlet. The unit operates between 41°F to 95°F (5°C to 35°C).
3. Audio Output: Connect the audio output of the CD-200BT to your amplifier or mixer using appropriate cables (e.g., RCA or XLR for balanced connections).
4. Remote Control Batteries: Insert 2 AA batteries into the wireless remote controller.
5. Rack Mounting (Optional): If rack mounting, secure the unit into a standard 19-inch equipment rack using appropriate screws.

3. Operating Instructions

3.1 CD Playback

The CD-200BT supports CD-DA, CD-ROM, CD-R, CD-RW, MP3-CD, and WMA-CD formats.

1. Insert a CD into the slot. The unit will automatically read the disc.
2. Press the SOURCE button until "CD" appears on the display.
3. Press the PLAY button to start playback.
4. Use the SKIP buttons (forward/backward arrows) to navigate between tracks.
5. Use the PAUSE or STOP buttons to control playback.
6. To eject the CD, press the EJECT button.

3.2 Bluetooth Wireless Playback

Stream audio wirelessly from your Bluetooth-enabled devices.

1. Press the SOURCE button until "Bluetooth" appears on the display.
2. On the CD-200BT, long-press the PAIRING button (or the corresponding button on the remote) for about 2 seconds to enter pairing mode. The display will show "Bluetooth Pairing".
3. On your Bluetooth device (e.g., smartphone, tablet), go to Bluetooth settings and select "CD-200BT" from the list of available devices to pair.
4. Once connected, the display will confirm "Connected". You can now play audio from your device, and if your device supports AVRCP, you can control playback (play/pause, skip) using the CD-200BT's remote control.

Figure 2: Front panel highlighting Bluetooth pairing and playback modes.

3.3 USB Media Playback

Play audio files from a USB flash drive.

1. Insert a USB flash drive into the USB port on the front panel.
2. Press the SOURCE button until "USB" appears on the display.
3. Press the PLAY button to start playback. Files are played in numerical order.
4. Use the DISPLAY button to cycle through file name, title, artist, album, and folder information.
5. Turn the MULTI JOG dial or use the SKIP buttons on the remote to navigate tracks.

3.4 Advanced Functions

The CD-200BT offers several advanced functions accessible via the SHIFT button on the front panel or dedicated buttons on the remote.

• A-B Repeat (CD only): Press SHIFT then A-B REP to set start (A) and end (B) points for continuous loop playback.
• Repeat Modes: Press SHIFT then REPEAT to repeat the entire CD/USB/SD card. Press SHIFT then P.MODE to repeat a single track.
• Panel Lock: To prevent unauthorized changes, press SHIFT then LOCK. Repeat to unlock.
• Power-On Play: This feature allows the unit to automatically resume playback from the last source when powered on. Press SHIFT then P.O PLAY to activate/deactivate.
• Dubbing (CD/AM/FM to USB/SD): Set the source (CD or AM/FM). Press SHIFT then DUB. Use the MULTI JOG dial to select USB or SD as the destination. Press the MULTI JOG dial to start recording. Press STOP to end.
• Output Attenuation: Access via HOME/MENU. Adjust the analog output level up to -18dB if the output is too high.
• Resume Setting: Access via HOME/MENU. Remembers the playback point when the unit was last stopped.
• Incremental Play: Access via HOME/MENU. Automatically jumps to the next track by pressing the play button.
• Serial Mode: Access via HOME/MENU. Choose whether the unit is controlled remotely via RS-232C or Ethernet.

4. Maintenance

To ensure the longevity and optimal performance of your Tascam CD-200BT, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Do not use liquid cleaners or aerosol sprays, as they may damage the finish or internal components.
• Disc Care: Handle CDs by their edges. Keep discs clean and free of scratches. Store them in their cases when not in use.
• Ventilation: Ensure the unit has adequate ventilation to prevent overheating. Do not block any ventilation openings.
• Storage: If storing the unit for an extended period, disconnect it from power and store it in a cool, dry place.

5. Troubleshooting

If you encounter issues with your CD-200BT, refer to the following common troubleshooting steps:

If the problem persists after trying these solutions, please contact Tascam customer support.

6. Specifications

7. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Tascam website. Keep your purchase receipt as proof of purchase for warranty claims.