1. Product Overview
The Eurofase Disk 1-Light Small Flush Mount, Model 23024-014, is a contemporary lighting fixture designed for indoor use. It features a white glazed metal frame and molded opal glass, providing diffused illumination. This fixture is suitable for various rooms including bathrooms, dining rooms, kitchens, living rooms, and porches. It is dimmable and uses a fluorescent light source.
Figure 1: Front view of the Eurofase Disk 1-Light Small Flush Mount.
2. Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries.
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Do not install this fixture in wet locations. This fixture is rated for indoor use only.
- Ensure all connections are secure and properly insulated.
- Do not exceed the maximum wattage specified for the light source.
- Handle glass components with care to prevent breakage.
3. Package Contents
Verify that all components listed below are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.
- Flush Mount Fixture (1)
- Mounting Hardware (1 set)
- Instruction Manual (1)
4. Setup and Installation
4.1 Pre-Installation
- Turn off power at the main fuse box or circuit breaker.
- Ensure the mounting surface is clean, dry, and structurally sound.
- Gather necessary tools: screwdriver, wire strippers, electrical tape, safety glasses.
4.2 Installation Steps
This fixture requires assembly. Follow these steps carefully:
- Prepare Wiring: Carefully pull the electrical wires from the outlet box. Connect the fixture's black wire to the house's black (live) wire, the fixture's white wire to the house's white (neutral) wire, and the fixture's ground wire to the house's ground wire (or green wire/bare copper). Secure connections with wire nuts and electrical tape.
- Attach Mounting Bracket: Secure the mounting bracket (included in hardware) to the outlet box using the provided screws. Ensure it is firmly attached.
- Mount Fixture Base: Align the fixture's base with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the ceiling and stable.
- Install Light Source: Insert the specified fluorescent bulb (not included) into the socket. Do not overtighten.
- Attach Glass Shade: Carefully place the molded opal glass shade onto the fixture base and secure it according to the specific design (e.g., twist-lock, retention clips). Ensure it is seated properly and securely.
Figure 2: Dimensional drawing of the Eurofase Disk Flush Mount, showing 11" diameter and 4.25" height.
5. Operating Instructions
Once installation is complete and verified, restore power at the circuit breaker.
- Turning On/Off: Operate the fixture using a standard wall switch connected to the circuit.
- Dimming Function: This fixture is dimmable. To utilize the dimming feature, ensure you are using a compatible dimmable fluorescent bulb and a suitable dimmer switch (sold separately). Follow the dimmer switch manufacturer's instructions for installation and operation.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your lighting fixture.
- Cleaning: Turn off power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
- Bulb Replacement: Turn off power before replacing the bulb. Allow the bulb to cool completely. Carefully remove the glass shade, then replace the fluorescent bulb with one of the same type and wattage (max 22 watts). Reattach the glass shade securely.
7. Troubleshooting
Refer to the table below for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light. |
|
|
| Light flickers or dims improperly. |
|
|
| Humming noise from fixture. |
|
|
8. Specifications
| Brand | Eurofase |
| Model Number | 23024-014 |
| Product Dimensions | 11"L x 11"W x 4.25"H |
| Material | Metal, Glass |
| Color | White |
| Light Source Type | Fluorescent |
| Number of Light Sources | 1 |
| Wattage | 22 watts |
| Voltage | 120 Volts |
| Installation Type | Flush Mount |
| Special Feature | Dimmable |
| Indoor/Outdoor Usage | Indoor |
| Assembly Required | Yes |
| Certification | ETL Listed |
9. Warranty and Support
This Eurofase product is covered by a manufacturer's limited warranty. Please refer to the warranty documentation included with your purchase for specific terms and conditions.
For technical support, replacement parts, or warranty claims, please contact Eurofase customer service. Contact information can typically be found on the Eurofase website or on the product packaging.
